INTERNATIONAL PAINT INC. INTER -- INTERNATIONAL THINNER, GTA004
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLFJC
MSDS NAME: INTERNATIONAL THINNER, GTA004
Responsible Party
Name: INTERNATIONAL PAINT INC. INTERNATIONAL
Address: 6001 ANTOINE DRIVE
City: HOUSTON TX 77091
Info Phone: 713-684-1244
Emergency Phone Number: 800-854-6813
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC. INTERLUX
Address: 2270 MORRIS AVENUE
City: UNION NJ 07083-0386
Phone: 908-964-2206
Name: INTERNATIONAL PAINT INC. INTERNATIONAL
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
=======================================================
Ingredients
=======================================================
Cas: 8052-41-3
RTECS #: WJ8925000
Name: MINERAL SPIRIT
% low Wt: 50.
% high Wt: 100.
OSHA PEL: 500 PPM
OSHA STEL: N/E
ACGIH TLV: 100 PPM
ACGIH STEL: N/E
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: CAUSES NOSE AND THROAT IRRITATION. HARMFUL IF
INHALED. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE
OR NAUSEA. EYE CONTACT: CAUSES EYE IRRITATION. SKIN CONTACT: CAUSE S SKIN
IRRITATION. INGESTION: HARMFUL IF SWALLOWED.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARD ACUTE AND CHRONIC (FP
N).
First Aid: GENERAL: IN ALL CASES OF DOUBT, OR WHEN SYMPTOMS PERSIST, SEEK
MEDICAL ATTENTION. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
INHALATION: REMOVE TO FRESH AIR. IF DISCOMFORT IS PRESENT OR BR EATHING IS
ABSENT GET MEDICAL ATTENTION IMMEDIATELY. EYE CONTACT: FLUSH IMMEDIATELY WITH
PLENTY OF WATER FOR 15 MINUTES UNTIL IRRITATION SUBSIDES. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN C ONTACT: FLUSH WITH LARGE AMOUNTS OF
WATER. USE SOAP IF AVAILABLE. REMOVE SEVERELY CONTAMINATED CLOTHING
(INCLUDING SHOES). IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
INGESTION: IF SWALLOWED, (SP ILL RELEASE PROCEDURES)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE
COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN INERT MATERIAL
(E.G., DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL WASTE CONTAINER.
FIRST AID (CONT): DO NOT INDUCE VOMITING. KEEP AT REST. GET PROMPT MEDICAL
ATTENTION.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE AWAY FROM
INCOMPATIBLE MATERIALS. (SEE STABILITY/REACTIVITY). KEEP AWAY FROM HEAT,
SPARKS AND FL AMES. PROTECT MATERIAL FROM DIRECT SUNLIGHT. GROUND AND BOND
CONTAINERS WHEN (OTHER PRECAUTIONS)
Other Precautions: N/P. HANDLING AND STORAGE PRECAUTIONS (CONT):
TRANSFERRING MATERIALS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES.
FOLLOW ALL MSDS/LABEL WARNINGS, EVEN AFTER THE CONTAINER IS EMPTIED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =37.8C, 100.F
Lower Limits: 1
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL. OSHA
CLASSIFICATION: COMBUSTIBLE LIQUID - CLASS II.
Fire Fighting Procedures: FIREFIGHTERS SHOULD WEAR A NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT
AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
IN THE ABSENCE OF ELECTRICITY, A WATER SPRAY (A FOG NOZZLE IS PREFERRED) MAY
BE USED TO COOL CONTAINERS. DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE
TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: DO NOT BREATHE VAPORS OR SPRAY MIST. IF YOU EXPERIENCE
EYE WATERING, HEADACHE OR DIZZINESS OR IF AIR MONITORING DEMONSTRATES
VAPOR/MIST LEVELS ABOVE APPLICABLE LIMITS, WEAR AN APPROPRIATE, PROPERLY FI
TTED RESPIRATOR (NIOSH APPROVED) DURING AND AFTER APPLICATION. FOLLOW
RESPIRATOR MANUFACTURER'S DIRECTIONS FOR RESPIRATOR USE.
Ventilation: PROVIDE SUFFICIENT VENTILATION IN VOLUME AND PATTERN TO: (A) KEEP
THE TLV OF THE HAZARDOUS INGREDIENT BELOW THE LIMITS (SUPPLEMENTAL SAFETY
& HEALTH)
Protective Gloves: CHEMICAL RESISTENT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL SAFETY GOGGLES (FP N).
Other Protective Equipment: CLOTHING: AS NEEDED, USE BODY PROTECTION TO AVOID
CONTACT WITH PRODUCT. EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN CRITERIA
(FP N).
Work Hygienic Practices: WASH CONTAMINATED CLOTHING AND SHOES BEFRUE REUSE.
Supplemental Safety and Health: VENTILATION (CONT): SPECIFIED IN (INGREDIENTS)
SECTION. (B) REMOVE VOLATILES PRODUCED DURING CURE AND DECOMPOSITION
PRODUCTS PRODUCED DURING WELDING OR CUTTING ON SURFACES COATED WITH THIS
PRODUCT.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =157.2C, 315.F
Vapor Density: > AIR
Spec Gravity: .781
Evaporation Rate & Reference: SLOWER / ETHER
Appearance and Odor: PHYSICAL STATE: LIQUID. ODOR: NOT SPECIFIED BY
MANUFACTURER (FP N).
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: GENERAL: THIS PRODUCT IS STABLE AND HAZARDOUS
POLYMERIZATION WILL NOT OCCUR.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTIO NAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS
MAY BE HARMFUL OR FATAL.
=======================================================
Ecological Information
=======================================================
Ecological: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT (DEPARTMENT OF TRANSPORTATION): PROPER SHIPPING
NAME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER: UN1263 PACKING
GROUP: PACKING GROUP III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III (SUPERFUND AMENDMENTS AND
REAUTHORIZATION ACT): NONE KNOWN UNLESS CHEMICALS ARE SPECIFIED BELOW:
SECTION 302 REPORTABLE INGREDIENTS: N/P. 313 REPORTABLE INGREDIENTS: N/P.
Federal Regulatory Information: TSCA (TOXIC SUBSTANCE CONTROL ACT): COMPONENTS
OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY. CERCLA (COMPREHENSIVE
RESPONSE COMPENSATION, AND LIABILITY ACT): WE RECOMMEND YOU CONTACT LOCAL A
UTHORITIES TO DETERMINE IF THERE MAY BE OTHER LOCAL REPORTING REQUIREMENTS.
W CLASSIFICATION: CLASS B, DIVISION 3.
State Regulatory Information: CALIFORNIA PROPOSITION 65: NONE KNOWN UNLESS
SPECIFIED BELOW: N/P.
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERNATIONAL THINNER, GTA004
Company: INTERNATIONAL PAINT INC. INTERNATIONAL
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-854-6813
Label Required IND: Y
Date Of Label Review: 06/11/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION: CAUSES NOSE AND THROAT IRRITATION.
HARMFUL IF INHALED. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS,
HEADACHE OR NAUSEA. EYE CONTACT: CAUSES EYE IRRITATION. SKIN CONTACT : CAUSES
SKIN IRRITATION. INGESTION: HARMFUL IF SWALLOWED. CHRONIC: PROLONGED OR
REPEATED EXPOSURE MAY CAUSE CENTRAL NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
GARD ANTI RUST SAE 10W, PRESERVATION BREAK-IN OIL
| |
|
GARD ANTI RUST SAE 10W, PRESERVATION BREAK-IN OIL
| |
|
GARD ANTI RUST SAE 10W, PRESERVATION BREAK-IN OIL
| |
|
LTSA-35A
| |
|
PRO-LINK PREFERENCE ULTRA HIGH SPEED FLOOR FINISH
| 7732-18-5
111-90-0
78-51-3 |
|
0638, CONQUEST
| |
|
0638, CONQUEST
| |
|
TB 56, SOLDER
| |
|
30501104 ANODIZING TYPE II (SULFURIC) SOLUTION, 1 LITER
| |
|
C3320-3322-3330, CUPRIC NITRATE
| 3251-23-8 |
|
SCOTCH-WELD BRAND EC-3960 STRUCTURAL ADHESIVE PRIMER
| 78-93-3
123-42-2
109-99-9
28064-14-4
107-98-2
7732-18-5
7789-06-2
67-56-1
67-64-1
25036-25-3 |
|
GARD ANTI RUST SAE 30
| |
|
GARD ANTI RUST SAE 30
| |
|
OE-HDO-10, IMP-L-10WT
| |
|
ANSULITE 3% AFFF(AFC-5-A)
| |
|
36-0019, SIMULATED BLOOD
| |
|
36-0019, SIMULATED ANTI-SERUM
| |
|
C4801A-10. CYAN, C4841A-NO. 10 CYAN, INK CARTRIDGE
| 616-45-5
110-15-6
7732-18-5 |
|
791 ALKALINE DETERGENT
| |
|
F.P. MONOMER, SELF CURE (SEE SUPPL)
| |
|
F.P. TRAY POLYMER #64 BLUE, SHADE #26151 (SEE SUPPL)
| |
|
FLEET GLO
| |
|
FLEET KLEEN
| |
|
BF-252
| |
|
4478 ACRYLIC LATEX TRAFFIC PAINT
| 25265-77-4
7631-86-9
1317-65-3 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200 WHITE, 05120, 05220
| |
|
SAFE D SCALE INDUSTRIAL DESCALER
| |
|
GARD ANTI RUST SAE 15W-40, (PRESERVATION BREAK-IN OIL)
| |
|
GARD ANTI RUST SAE 15W-40, (PRESERVATION BREAK-IN OIL)
| |
|
GARD ANTI RUST SAE 15W-40, (PRESERVATION BREAK-IN OIL)
| |
|
0145-6, VORTEX
| |
|
C2100, BISMUTH NITRATE (SEE SUPPL)
| 1304-85-4 |
|
22251, PR-2225 ADHESION PROMOTER (SEE SUPPLEMTAL DATA)
| |
|
ROUNDUP PRO HERBICIDE
| |
|
AI 8493-3K AIR FORCE TYPE I I I, (SEE SUPPL)
| |
|
SCOTCH SEAL 800 INDUSTRIAL SEALANT
| 78-93-3
9003-18-3
8050-31-5
471-34-1
108-10-1
78-51-3
1327-39-5
13463-67-7
1309-37-1
69-72-7
1314-13-2 |
|
ROSIN CORE WIRE SOLDER 60/40
| |
|
ELECTRONIC SOLV #631-914 (BULK FORMULATED)
| |
|
AUTOMOTIVE GASOLINE, MIDGRADE UNLEADED GASOLINE
| 8006-61-9
108-88-3
1330-20-7
71-43-2
95-63-6
100-41-4
110-54-3
110-82-7
91-20-3 |
|
MIL-PRF-85285C (MIL-C-85285B), 03GY274CAT16440
| 3779-63-3
822-06-0
64742-95-6
123-86-4
107-87-9
763-69-9
1119-40-0
627-93-0
106-65-0 |
|
INTERNATIONAL THINNER, GTA004
| 8052-41-3 |
|
2225B1, PR-2225 B-1 CONDUCTIVE SILICONE SEALANT (SEE SUP DAT
| 13423-61-5
7440-02-0
108-88-3
63148-62-9
70131-67-8 |
|
ARMSTRON RESILIENT SHEET FLOORING AND RESILENT TILE FLOORING
| |
|
01831, POWER STEERING FLUID (SEE SUPPL)
| |
|
PREMIUM HYDRAULIC OIL, HF100, HF101, HF102, HF104
| |
|
HYDROSTAR H-2 SHIELDING GAS (NONFLAMMABLE)
| 1333-74-0
7440-37-1 |
|
CATHA-COAT 304V POWDER 304P0295
| 7440-66-6
1314-13-2 |
|
CATHA-COAT 304V GRAY LIQUID 304B0200
| 1070-10-6
1330-20-7
107-98-2
14464-46-1
71-43-2
100-41-4
11099-06-2
60676-86-0 |
|
061030020, MAYOQUEST 1400
| |
|
6770, MOLYLUBE ANTI-SEIZE
| |
|
|