===================== Product Identification =====================
MSDS NAME:TONER
NIIN:00N069796
MSDS Number: CBKVX
=== Responsible Party ===
Company:TDK CORP
Address:13-1, NIHONBASHI 1-CHOME, CHUO-KU
City:TOKYO 103, JAPAN
Info Phone Num:03-278-5244
Emergency Phone Num:03-278-5244
CAGE:S5988
=== Contractor Identification ===
Company:TDK CORP
Address:13-1 NIHONBASHI 1-CHOME CHUO-KU
Box:City:TOKYO, JAPAN
Phone:03-278-5244
CAGE:S5988
============= Composition/Information on Ingredients =============
Name:STYRENE BUTYL ACRYLATE COPOLYMER
Fraction by Wt: 40%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:POLYPROPYLENE
Fraction by Wt: 3%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:MAGNETITE
CAS:1309-38-2
RTECS #:OM4800000
Fraction by Wt: 50%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SILICA, AMORPHOUS-DIATOMACEOUS EARTH
CAS:61790-53-2
RTECS #:HL8600000
Fraction by Wt: <1%
OSHA PEL:20 MPPCF; Z-3
ACGIH TLV:10 MG/M3 TDUST
Name:METALLIC SOAP
Fraction by Wt: <1%
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC:NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE.
SKIN:WASH WITH WATER. EYES:FLUSH WITH WATER FOR @ LEAST 15 MINUTES.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER FOG, CHEMICAL FOAM, CO*2.
Fire Fighting Procedures:NOT APPLICABLE. USE NIOSH/MSHA APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN WITH A VACUUMCLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IN CLOSED PACKAGES. AVOID HIGH
TEMPERATURE AND FIRE.
Other Precautions:NONE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED RESPIRATOR TO AVOID
INHALATION OF POWDER.
Ventilation:LOCAL EXHAUST:PREFERABLE. MECHANICAL (GENERAL):ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:284F,140C
Spec Gravity:1.8 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2.
==================== Disposal Considerations ====================
Waste Disposal Methods:DUMP OR INCINERATE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***