===================== Product Identification =====================
MSDS NAME:EASYPOXY K-45 PART A RESIN
NIIN:00N069795
Kit Part:Y
MSDS Number: CBKVV
=== Responsible Party ===
Company:CONAP INC
Address:1405 BUFFALO ST
City:OLEN
State:NY
ZIP:14760
Country:US
Info Phone Num:716-372-9850
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:MARVIN A FRIEDMAN
CAGE:DO146
=== Contractor Identification ===
Company:CONAP INC
Address:1405 BUFFALO ST
City:OLEAN
State:NY
ZIP:14760-1139
Phone:716-372-9650
CAGE:DO146
Company:CONAP INC.,WHOLLY OWNED SUBSIDIARY OF CYTEC INDUSTRIES
INC.
Address:1405 BUFFALO STREET
Box:City:OLEAN
State:NY
ZIP:14760
Country:US
Phone:716-372-9650
CAGE:16245
============= Composition/Information on Ingredients =============
Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 90-100%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:GLYCERIN (GLYCEROL)
CAS:56-81-5
RTECS #:MA8050000
Fraction by Wt: <1%
OSHA PEL:15 MG/M3 (MIST)
ACGIH TLV:10 MG/M3 (MIST)
Name:SILICA, FUMED.
CAS:7631-86-9
Fraction by Wt: 0-10%
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:SEE INGRDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:ALLERGIC SKIN RXNS/PRIMARY SKIN
IRRIT MAY BE PRDCED BY PRLNGD/RPTD DERM CONT W/EPOXY RESINS.
OVEREXP TO VAP DURING HEAT CURING MAY CAUSE IRRIT/INJURY OF RESP
TRACT & EYE IRRIT. DIRECT CONT W/THI S MATL MAY CAUSE MOD EYE &
SKIN IRRIT. TOX INFO ON OSHA REGULATED COMPONENTS OF PROD IS AS
FOLLOWS: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:PRLNGD/RPTD DERM EXPOS TO EPOXY RESINS
MAY PRDCE ALLERGIC SKIN RXNS/PRIMARY SKIN IRRIT. GLYCERINE:EYE/SKIN
CONT WILL PRDCE MILD IRRIT. INHAL OF MIST COULD CAUSE RESP IRRIT.
AMORPHOUS SILICA:O VEREXP TO SYNTHETIC AMORPHOUS SILICA DUST BY
INHAL, ABSORP/INGEST IS NOT EXPECTED TO CAUSE ADVERSE EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:IMMED WASH AFFECTED
AREAS W/SOAP & PLENTY OF WATER. REMOVE CONTAMD CLTHG & SHOES. OBTA
IN MED ATTN. DESTROY/THORO CLEAN SHOES BEFORE REUSE. DO NOT REUSE
CONTAMD CLTHG W/OUT LAUNDERING. EYE:IMMED IRRIGATE W/PLENTY OF
WATER FOR @ LEAST 15 MINS. OBTAIN MED ATTN IF IRRIT PERSISTS.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:>212F,>100C
Extinguishing Media:USE WATER SPRAY, CARBON DIOXIDE OR DRY CHEMICAL TO
EXTINGUISH FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . USE WATER TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION OR COMBUSTION MAY
PRODUCE PHENOLICS AND OXIDES OF CARBON.
================== Accidental Release Measures ==================
Spill Release Procedures:WHERE EXPOS LEV IS NOT KNOWN, WEAR NIOSH/MSHA
APPRVD, POS PRESS, SELF-CONTAINED RESP. WHERE EXPOS LEV IS KNOWN,
WEAR NIOSH/MSHA APPRVD RESP SUITABLE FOR LEV OF EXPOS. IN ADDN TO
PROT CLTHG/EQUIP IN EX POS CTLS/PERSONAL PROT SECTION, WEAR
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONT W/EYES. AVOID PRLNGD/RPTD
CONT W/SKIN. WASH THOROUGHLY AFTER HANLDING.
Other Precautions:CUTTING, GRINDING, OR SANDING OF PARTS FABRICATED
AFTER CURING OF THIS MATL MAY CREATE RESPIRABLE DUST PARTICLES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE EXPOS ARE BELOW PEL, NO RESP PROT IS REQD.
WHERE EXPOS EXCEED PEL, USE RESP APPRVD BY NIOSH/MSHA FOR MATL &
LEV OF EXPOS. A NIOSH/MSHA APPRVD FULL FACEPIECE RESP WILL PROVIDE
EYE & FACE PROT.
Ventilation:WHERE MATL IS NOT USED IN CLSD SYS, GOOD ENCLOSURE & LOC
EXHAUST VENT SHOULD BE PROVIDED TO CTRL EXPOS WHEN (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGG & (SUPDAT)
Other Protective Equipment:APRON, WORKPANTS, LONG SLEEVE WORK
SHIRT/DISP COVERALLS. BARRIER CREAMS. ANSI APPRVD EMER EYE WASH &
DELUGE (SUPDAT)
Work Hygienic Practices:FOOD, BEVERAGES, & TOBACCO PRODS SHOULD NOT
CARRIED, STORE/CONSUMED WHERE MATL IS IN USE. BEFORE EATING,
(SUPDAT)
Supplemental Safety and Health
SPILL RELEASE PROC:IMPERVIOUS BOOTS. COVER SPILLS W/SOME INERT ABSORB
MATL; SWEEP UP & PLACE IN WASTE DISP CNTNR. FLUSH AREA W/WATER.
VENT:SPRAYING/CURING @ ELEVATED TEMPS. HYGIENE PRACT:DRINKING/SMKN
G, WASH FACE & HANDS W/SOAP & WATER. EYE PROT:FULL LENGTH
FACESHIELD . OTHER PROT EQUIP:SHOWER .
================== Physical/Chemical Properties ==================
Spec Gravity:1.2
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NOT KNOWN
Appearance and Odor:MILKY VISCOUS LIQUID, CHARACTERISTIC ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ACIS, BASES AND AMINES.
Stability Condition to Avoid:AVOID EXCESSIVE HEATING OVER LONG PERIODS
OF TIME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR COMBUSTION
MAY PRODUCE PHENOLICS AND OXIDES OF CARBON.
Conditions to Avoid Polymerization:AVOID ACIDS, BASES OR AMINES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE I/A/W APPLICALBLE FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|