===================== Product Identification =====================
MSDS NAME:X-1567 BLACK WING WALK
NIIN:00N069743
MSDS Number: CBKTB
=== Responsible Party ===
Company:RANDOLPH PRODUCTS CO
Address:701 12TH ST
Box:830
City:CARLSTADT
State:NJ
ZIP:07072-0830
Country:US
Info Phone Num:201-438-3700
Emergency Phone Num:800-255-3924
Preparer's Name:JHR
CAGE:77672
=== Contractor Identification ===
Company:RANDOLPH PRODUCTS CO
Address:701 12TH ST
Box:830
City:CARLSTADT
State:NJ
ZIP:07072-0830
Country:US
Phone:201-438-3700
CAGE:77672
============= Composition/Information on Ingredients =============
Name:SYNTHETIC RESIN VP: 10 @ 20C
Fraction by Wt: 15%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ALKYD RESIN VP: 3 @ 20C
CAS:63148-69-6
Fraction by Wt: 10%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC
SOLVENT NAPHTHA) VP: 7.1 @ 20C
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 5%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:STODDARD SOLVENT; (ALIPHATIC NAPHTHA) VP: 10 @ 20C
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 10%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Name:XYLENE (SARA 313) (CERCLA) VP: 10 @ 20C
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 15%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:WASTE DISP METH: EPA HAZARDOUS WASTE CODE F003 HAZARDOUS
WASTE CHARACTERISTICS. IGNITABILITY.
RTECS #:9999999ZZ
Name:VENT: SOLVENT VAPORS SHOULD BE REMOVED FROM LOWER LEVELS OF
WORK AREA & IGNITION SOURCES SHOULD BE ELIMINATED.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SML AMTS OF LIQ ASPIR INTO RESP
SYS DURING INGEST/VOMIT, MAY CAUSE CHEM PNEUMONIA/PULM EDEMA.
CHRONIC: CHRONIC HEALTH EFTS ARE POSS FROM LONG TERM EXPOS TO THIS
MATL, INCL DRYING, CRACKING & IR RITATION OF SKIN. REACTS W/SKIN
PROTEIN& MOISTURE & CAN CAUSE RASH, SCALING/BLISTERING. HIGH CONCS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAY CAUSE HDCH & DIZZ, ARE ANESTH, &
MAY HAVE OTHER CNS EFTS, INCL DEATH. CONTAINS XYLENE WHICH HAS
SHOWN REPRODUCTIVE EFFECTS IN MICE.
Medical Cond Aggravated by Exposure:PREEXISTING SENSITIVITY TO SOLVENTS
CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
MD. SKIN: FLUSH WITH WATER. EYES: FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD IMMEDIATELY.
INGESTION: DO NOT INDUCE VOMITING. KEEP PERSON WARM, QUIET AND GET
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:79.0F,26.1C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER STREAM WILL SPREAD FIRE. DO NOT USE
WATER HOSE STREAM.
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, SPARKS, & OPEN FLAME. CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. WATER MAY BE USED TO COOL CLSD(SUP DAT)
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID BRTHG SOLV VAP. ENSURE ADEQ VENT. AVOID
SPARKS, FLAMES & ANYTHING WHICH COULD CAUSE FIRE. ELIM SOURCE OF
SPILL IF YOU CAN DO SO W/OUT RISK BY CLOSING VALVE, PLUGGING HOLE,
ETC. APPLY ABSORB INER T MATL(SAND, DUST, VERMICULITE) TO
SPILL.(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:CONTACT LENS WEARERS SHOULD CONSULT
PROVIDER BEFORE HANDLING. DRUMS SHOULD BE GROUNDED WHEN BEING
EMPTIED.
Other Precautions:PROVIDE RESPIRATOTY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP TYPES. NIOSH/MSHA APPRVD
CHEM/MECH FILTERS REC WHEN VENT IS RESTRICTED. PREC MUST BE TAKEN
SO THAT PERS DO NOT BREATHE VAPS/HAVE CONT W/EYES/SKIN. PROT
AGAINST EXPOS TO BOTH VAP & SPRAY MIST.
Ventilation:SUFFICIENT VENT IN VOL & PATTERN SHOULD BE PROVIDED TO KEEP
AIR CONTAM BELOW CURRENT APPLIC OSHA PEL/TLV LIMITS. (ING 7)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:USE PROT CREAMS WHERE SKIN CONTACT IS
LIKELY. EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:REMOVE & WASH CONTAM CLTHG BEFORE REUSE. USE
NORM HYGIENE PRACT DURING & AFTER HANDLING THIS MATERIAL.
Supplemental Safety and Health
EXPLO HAZ:CONTRS TO PVNT PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO WHEN
EXPOSED TO EXTREME HEAT. REMOVE ALL NON-ESSENTIAL PERS FROM FIRE
AREA. VAP HVR/AIR & CAN TRAVEL CONSIDERABLE DIST TO SOURCE OF IGNIT
& FLASHBACK. SPILL PROC: CLEAN SPILL W/BRISTLE BROOMS,
NON-SPARKING TOOLS, CLEAN DRY RAGS. PROT CLTHG SHOULD BE WORN.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>279F,>137C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.44
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:THIN BLACK LIQUID, WITH TYPICAL SOLVENT ODOR
Percent Volatiles by Volume:41.3
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS, ACIDS AND ALKALIES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION RELEASES CARBON
MONOXIDE AND/OR CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:SOAK LIQS W/SAWDUST/RAGS & REMOVE. FLUSH W/WATER
IF POSS. AVOID SKIN CONT. DISP SHOULD BE I/A/W LOC, STATE & FED
REGS. DO NOT INCIN, CUT/WELD EMPTY CONTRS. WHEN DISCARDED THIS MATL
IS HAZ WASTE. TRANS FER LIQ TO CONTRS FOR RECOVERY/DISP. (ING 6)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|