=====================  Product Identification  =====================

MSDS NAME:253, MOORCRAFT LATEX ENAMEL UNDER COATER & (SUP DAT)
NIIN:00N069744
MSDS Number: CBKTC
=== Responsible Party ===
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:09585
=== Contractor Identification ===
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <5.8%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:CLAY (KAOLIN); (HYDROUS ALUM SILICATES)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: <6.6%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST

Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: <19.6%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:ETHANOL, 2-PHENOXY-; (ETHYLENE GLYCOL PHENYL ETHER) VP:
    <0.01 @ 20C
CAS:122-99-6
RTECS #:KM0350000
Fraction by Wt: <1.0%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF THE
    RESPIRATORY TRACT. SKIN/EYES: PRIMARY IRRITATION. INGESTION: LARGE
    AMOUNTS COULD CAUSE SERIOUS INJURY. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN
    ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. GET MEDICAL HELP FOR ANY
    BREATHING DIFFICULTY. EYES: FLUSH THOROUGHLY WITH WATER FOR AT
    LEAST 15 MINUTES. CALL MD. SKIN: WASH WITH SOAP AND WATER.
    INGESTION: DRINK 1-2  GLASSES OF WATER TO DILUTE. DO NOT INDUCE
    VOMITING. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS.
Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH
    SKIN OR BREATHING OR SPRAY MIST OR SANDING DUST. CLOSE CONTAINER
    AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
    INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIED FOR
    PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED
    OR CONFINED AREAS.
Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV AND PEL.
    MECHANICAL EXHAUST MAY BE REQUIRED IN CONFINED AREAS.
Protective Gloves:WATERPROOF DURING REPEATED CONTACT.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN. EMERGENCY
    EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
    HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
TRADE NAME/PART #: PRIMER SEALER.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SEE ING 4
Vapor Density:HVR/AIR
Spec Gravity:1.26-1.32
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:68-70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON MONOXIDE
    AND CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
    LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***