=====================  Product Identification  =====================

MSDS NAME:GP VII FAULT FDR FLUORESCENT PENETRANT#1032
NIIN:00-782-2740
Kit Part:Y
MSDS Number: BFPPS
=== Responsible Party ===
Company:CROWN INDUSTRIAL PRODUCTS CO
Address:STATE LINE ROAD
City:HEBRON
State:IL
ZIP:60034
Country:US
Info Phone Num:815-648-2424
Emergency Phone Num:815-338-2141
Preparer's Name:JEFFREY BANASEK
CAGE:92381
=== Contractor Identification ===
Company:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381

=============  Composition/Information on Ingredients  =============

Name:HEAVY AROMATIC NAPHTHA
CAS:68477-31-6
RTECS #:VG7067000
Fraction by Wt: 31-50%
Other REC Limits:NONE SPECIFIED BY M.
ACGIH TLV:10 PPM

Name:TRIXYLENYL PHOSPHATE
CAS:25155-23-1
RTECS #:ZE8320000
Fraction by Wt: 11-30%
Other REC Limits:LD50=4640 MG/KG

Name:LIQUIFIED PETROLEUM GAS,SWEETENED
CAS:68476-86-8
Fraction by Wt: 11-30%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:900 PPM
ACGIH TLV:900 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:WARNING-CONTENTS UNDER PRESSURE
    (AEROSOL). ACUTE-EYE:IRRITATION, BLURRED VISIONS. SKIN:IRRITATION
    AND DEFATTING. INHALATION:RESPIRATORY TRACT IRRITATION, DIZZINESS,
    AND UNCONSCIOUSNESS. INGESTION:GI T RACT IRRITATION.
    CHRONIC-DERMATITIS.
Effects of Overexposure:INHAL:HEADACHE,DIZZINESS,NAUSEA;INGEST:
    NAUSEA;EYES:SEVERE IRRITATION;SKIN:DEFATTING,DRYING,STAINING.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF NEEDED;
    EYES/SKIN:FLUSH WITH  LARGE AMTS WATER FOR 15 MIN; INGEST:RINSE
    MOUTH, DRINK 1-2 GLASSES OF WATER, DO NOT INDUCE VOMITING. GET
    MEDICAL ATTENTION. SE EK MEDICAL HELP FOR EYES, BREATHING
    DIFFICULTY, OR OTHER SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:<20F,<-7C
Lower Limits:1.9
Upper Limits:8.5
Extinguishing Media:CO*2,FOAM,DRY POWDER,WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN CONFINED AREA.
Unusual Fire/Explosion Hazard:TREAT AS CYLINDERS OF COMPRESSED GAS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTION:REMOVE ALL
    IGNITION SOURCES AND VENTILATE THE AREA;USE SUITABLE ABSORBENT
    MATERIAL AND RECOVER FOR PROPER DISPOSAL.DO NOT PUNCTURE OR
    INCINERATE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL (BELOW 120F) DRY AND
    WELL VENTILATED AREA;KEEP AWAY FROMHEAT,SPARKS AND OPEN FLAMES.KEEP
    CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN & EYES; DO NOT BREATHE
    VAPORS; EXCESSIVE BREATHING OF VAPORS CAN BE HARMFUL OR FATAL. WASH
    THOROUGHLY AFTER EACH USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSH APPROVED RESPIRATORS FOR ORGANIC
    VAPORS/MIST IF > TLV.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
    WASH STATION
Supplemental Safety and Health
MSDS DATED:APRIL 7,1986;SHIPPING NAME (DOT)PER MFR;THIS IS FORMULATION
    CHANGE FOR PART INDICATOR B,PENETRANT#1032 OF THREE PARTS KIT;FLASH
    POINT LIQUID=215F PMCC (AEROSOL)< 2OF/VAPOR PRES 2586

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:AEROSOL
Vapor Density:>1.0
Spec Gravity:1.008
Evaporation Rate & Reference:0.02 (BUT ACET=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FLUORESCENT LIQUID/KEROSENE TYPE ODOR.
Percent Volatiles by Volume:>80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WET ALKALINE OR ACIDIC CONDITIONS.
Stability Condition to Avoid:EXTREME HEAT,OPEN FLAMES,SPARKS,ETC.
Hazardous Decomposition Products:CO ,POSSIBLE PHOSPHOROUS OXIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
    LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***