=====================  Product Identification  =====================

MSDS NAME:792022 LAC ACRYLIC N/C CAN TAN 30219
NIIN:00-782-3892
MSDS Number: BFPQK
=== Responsible Party ===
Company:PRATT & LAMBERT
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
CAGE:PRATT
=== Contractor Identification ===
Company:PRATT & LAMBERT
Address:250 PETTIT AVE
Box:2153
City:BELLMORE
State:NY
ZIP:11710
Country:US
Phone:800-647-2253
CAGE:PRATT
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: <5%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ISOBUTYL ACETATE
RTECS #:NP9100000
Fraction by Wt: 45%
ACGIH TLV:150 PPM

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 15%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHYL ISOBUTYL KETONE  (HEXONE)  (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: <0.5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:50 PPM/75 STEL; 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: <0.5%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INHAL:ANESTHETIC.IRRIT. OF NOSE,THROAT, EYES &
    POSS.DIZZ & NAUSEA.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOV FR EXPOS & PROVID FRESH AIR.SPLASH EYES:FLUSH
    IMMED.W/LG AMTS OF WATR F/15 MIN.SPLASH SKIN:REMOV CONTAM CLOTHING
    & WASH AFFECTED AREA W/WATER.INGESTION: DO NOT INDUCE
    VOMITING.CONSULT A DR . IMMED. IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:21F TCC-6C TCC
Extinguishing Media:CO*2,DRY CHEM,OR ALCOH,POLYMR FOAM PREF F/LG FIRES.
Fire Fighting Procedures:SELF-CONTND BREATH APPARAT SHLD BE AVAIL
    F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNR TIGHT CLOS.ISOLAT FR
    HEAT,ELECTR EQPMT,SPARK 6 OPN FLAM.CLOS CONTNRS MAY EXPLO WHEN
    EXPL(S

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAMES,HOT
    SURFACES,ELECTR,STATIC OR FRICTIONAL SPARKS).VENTILATE AREA & AVOID
    BREATHING VAPORS.REMOV W/INERT ABSORBENT & USE NON-SPARKING
    TOOLS.STEPS MUST BE TAKEN TO AVOID	CONTAM OF GROUND WATR OR
    STREAMS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
    IN COMPLIANCE W/OSHA 1910.106.CONTNRS SHOULD BE BONDED TO EACH OTHR
    & GROUNDED PROPER WHN TRANSF/POUR IN ANT CON.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTNRS DO NOT USE UNTIL
    ALL SAFETY PRECAUTIONS & MIXING DIRECTIONS HAVE BEEN READ & FULLY
    UNDERSTOOD BY THE USER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MECH RESPIRAT TO REMOV OVERSPRAY IN OUTDOOR OR
    OPEN AREA.
Ventilation:PROVID GEN DILUT/LOC EXHAUST VENTILAT IN VOL TO KP BELO
    TLV.
Protective Gloves:SOLVNT IMPERMEA
Eye Protection:SAFETY EYEWEAR.
Other Protective Equipment:USE PROTECTIVE EQPMT TO PREVENT SKIN
    CONTACT.
Supplemental Safety and Health
UNUS FIRE/EXPLOS.HAZARDS:ODE WHEN EXPOSED TO EXTREME HEAT.DO NOT APPLY
    TO VERY HOT SURFACES.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:174-724F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:73

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ACIDS OR ALKALIS.
Stability Condition to Avoid:FIRES,SPARKS & HOT SURFACES.
Hazardous Decomposition Products:SMOKE & OXIDES OF NITROGEN & CARBON
    WHEN BURNED.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIVE CHEMS
    W/O TECHNICAL SUPERVISIO

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORD. W/LOCAL,STATE & FEDERAL
    REGULATIONS.INCINERATE IN EPA APPRVD FACILITY.DO NOT INCINERATE
    CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***