=====================  Product Identification  =====================

MSDS NAME:FAULT-FINDER CLEANER 1031
NIIN:00-782-2740
MSDS Number: BFPPN
=== Responsible Party ===
Company:CROWN INDUSTRIAL PRODUCT
Address:STATE LINE ROAD
City:HEBRON
State:IL
ZIP:60034
Country:US
CAGE:92381
=== Contractor Identification ===
Company:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381

=============  Composition/Information on Ingredients  =============

Name:NAPHTHA(ALIPHATIC HYDROCARBON)
Fraction by Wt: 50%
ACGIH TLV:150 PPM

Name:HALOGENATED HYDROCARBONS
Fraction by Wt: 50%
ACGIH TLV:500 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION:LIGHT-HEADEDNESS,GIDDINESS,SHORTNESS
    OF BREATH.POSSIBLE NARCOSIS,CAN LEAD TO CARDIAC ARRH

=======================  First Aid Measures  =======================

First Aid:IF SWALLOWED DO NOT INDUCE VOMITING.CALL A DOCTOR.DO NOT GIVE
    EPINEPHRINE OR SIMILAR DRUGS. INHALATION:REMOVE TO FRESH
    AIR.ADMINISTER ARTIFICIAL RESPIRATION IF NECESSARY.

=====================  Fire Fighting Measures  =====================

Flash Point:55F,TCC,LIQUID
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:EXCLUDE AIR,USE FOAM,CARBON DIOXIDE,STEAM,WATER
    FOG,DRY CHEM
Fire Fighting Procedures:DO NOT WATER;EXCLUDE AIR;CONSULT LOCAL FIRE
    MARSHAL.
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIXTURE WITH AIR
    BETWEEN UPPER AND LOWER EXPLOSION LIMITS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SPLASH FILLING,OPEN FLAME,
    SPARKS. USE IN WELL-VENTILATED AREA.
Other Precautions:AEROSOL CONTAINER:DO NOT STORE IN DIRECT SUNLIGHT,OR
    AT TEMPERATURES OVER 120F. AVOID EXCESSIVE INHALATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR MASK IN HIGH CONCENTRATIONS.
Ventilation:LOCAL - YES
Protective Gloves:NO
Eye Protection:CHEMICAL SAFETY GOGGLEWS
Supplemental Safety and Health
THIS PRODUCT 1031 IS ONE OF THREE PRODUCTS WHICH MAKE UP AN INSPECTION
    PENETRANT KIT GROUP VII.THE OTHER TWO PRODUCTS ARE 1032 & 1033
    WHICH ARE PENETRANT AND DEVELOPER.

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:244-293
Vapor Pres:30
Vapor Density:3.94
Spec Gravity:0.75
Evaporation Rate & Reference:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT COLORED LIQUID WITH HYDROCARBON ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES OR SPARK SOURCES
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:EVAPORATE OR FLUSH WITH WATER TO
    OPEN,WELL-VENTILATED AREA.REMOVE TO APPROVED STORAGE
    CONTANER.AEROSOL CONTAINER:DO NOT PUNCTURE OR INCINERATE WHEN
    LIQUID IS EXPELLED,DEPRESS BOTTOM UNTIL GAS IS EXPEL LED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***