=====================  Product Identification  =====================

MSDS NAME:FREON 22
NIIN:00-782-3930
MSDS Number: BFPQT
=== Responsible Party ===
Company:E.I.DUPONT DE NEMOURS AND COMPANY,INC
Address:1007 MARKET ST
Box:1635
City:WILMINGTON
State:DE
ZIP:19899
Country:US
Info Phone Num:800-441-9450
Emergency Phone Num:800-441-3637,800-424-9300(CHEMTREC)
Preparer's Name:W.J.BROCK
CAGE:DO229
=== Contractor Identification ===
Company:E.I. DUPONT DE NEMOURS & CO
Address:1007 MARKET STREET
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-7515;800-441-9442
CAGE:18873
Company:E.I.DUPONT DE NEMOURS & CO INC
Address:549 ALBANY STREET
Box:1635
City:BOSTON
State:MA
ZIP:02118
Phone:800-441-7515
CAGE:DO229

=============  Composition/Information on Ingredients  =============

Name:CHLORODIFLUOROMETHANE, FREON 22
CAS:75-45-6
RTECS #:PA6390000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000 PPM
ACGIH TLV:1000PPM; 9192
Ozone Depleting Chemical:2

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:IHL-RAT LC50 IS 25PPH/4HOURS
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF HIGH CONCENTRATIONS OF
    VAPOR IS HARMFUL AND MAY CAUSE HEART IRREGULARITIES,
    UNCONSCIOUSNESS OR DEATH. INTENTIONAL MISUSE OR DELIBERATE
    INHALATION MAY CAUSE DEATH WITHOUT WARNING. VAPOR R EDUCES OXYGEN
    AVAILABLE FOR BREATHING AND IS HEAVIER THAN AIR. LIQUID CONTACT CAN
    CAUSE FROSTBITE.
Effects of Overexposure:NERVOUS SYSTEM DEPRESSION, DIZZINESS, HEADACHE,
    CONFUSION, INCOORDINATION, AND LOSS OF CONSCIOUSNESS. HIGHER
    EXPOSURES MAY CAUSE ALTERATION OF THE HEART'S ELECTRICAL ACTIVITY
    WITH IRREGULAR PULSE, PAL PITATIONS, OR INADEQUATE CIRCULATION; OR
    FATALITY FROM GROSS OVEREXPOSURE. SKIN CONTACT WITH LIQUID MAY
    CAUSE FROSTBITE.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PRE-EXISTING
    DISEASES OF THE CENTRAL NERVOUS OR CARDIOVASCULAR SYSTEM MAY HAVE
    INCREASED SUSCEPTIBILITY TO THE TOXICITY OF EXCESSIVE EXPOSURES.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
    ATTENTION. SKIN: FLUSH AREA WITH LARGE AMOUNTS OF WATER. TREAT FOR
    FROSTBITE IF NECESSARY BY GENTLY WARMING AFFECTED AREA. INHALATION:
    MOVE TO FRES H AIR. IF NOT BREATHING GIVE CPR. IF BREATHING
    DIFFICULT GIVE OXYGEN. GET MEDICAL ATTENTION. INGESTION: NOT
    CONSIDERED A POTENTIAL ROUTE OF EXPOSURE. HOWEVER, IF SWALLOWED GET
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:AS APPROPRIATE FOR COMBUSTABLES IN AREA. OTHER
    BURNING MATERIAL MAY CAUSE PRODUCT TO BURN WEAKLY.
Fire Fighting Procedures:USE WATER SPRAY OR FOG TO COOL CONTAINERS.
    SELF-CONTAINED BREATHING APPARATUS IS REQUIRED IF CYLINDERS RUPTURE
    OR CONTENTS ARE RELEASED UNDER FIRE CONDITIONS.
Unusual Fire/Explosion Hazard:CYLINDERS ARE EQUIPPED WITH PRESSURE AND
    TEMPERATURE RELIEF DEVICES BUT MAY RUPTURE UNDER FIRE CONDITIONS.
    DECOMPOSITION MAY OCCUR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA-ESPECIALLY LOW PLACES WHERE
    HEAVY VAPORS MIGHT COLLECT. REMOVE OPEN FLAMES. USE PERSONAL
    PROTECTIVE EQUIPMENT DURING CLEAN UP. USE SELF-CONTAINED BREATHING
    APPARATUS FOR LARGE SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE CONTAINERS IN CLEAN, COOL, DRY,
    WELL VENTILATED AREA. DO NOT HEAT ABOVE 125F. PROTECT CONTAINER AND
    ITS FITTINGS FROM PHYSICAL DAMAGE.
Other Precautions:STORAGE IN SUBSURFACE LOCATIONS SHOULD BE AVOIDED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:UNDER NORMAL MANUFACTURING CONDITIONS, NO
    RESPIRATORY PROTECTION IS REQUIRED WHEN USING THIS PRODUCT.
    SELF-CONTAINED BREATHING APPARATUS IS REQUIRED IF A LARGE RELEASE
    OCCURS.
Ventilation:NORMAL VENTILATION IS GENERALLY ADEQUATE. USE LOCAL EXHAUST
    FOR LARGE RELEASES AND MECHANICAL VENTILATION IN LOW PLACES.
Protective Gloves:IMPERVIOUS GLOVES WHEN HANDLING LIQUIDS.
Eye Protection:SPLASH GOGGLES WHEN HANDLING LIQUIDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
    DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXCESSIVE VAPORIZATION CAN DEPLETE/REPLACE OXYGEN NEEDED FOR BREATHING.
    THIS IS A MAJOR HAZARD IN CONFINED/ENCLOSED SPACES AND AREAS WITH
    LITTLE VENTILATION. FREON 22 SHOULD NOT BE MIXED WITH AIR FOR  LEAK
    TESTING. IT SHOULD NOT BE USED OR ALLOWED TO BE PRESENT WITH HIGH
    CONCENTRATIONS OF AIR ABOVE ATMOSPHERIC PRESSURE.

==================  Physical/Chemical Properties  ==================

HCC:G3
Boiling Pt:B.P. Text:-41F,-41C
Vapor Pres:151 PSIG
Vapor Density:3.03 AIR=1
Spec Gravity:1.194 (LIQUID)
pH:7
Evaporation Rate & Reference:>1 (CC14=1.0)
Solubility in Water:SLIGHT,0.30WT %
Appearance and Odor:CLEAR, COLORLESS, LIQUIDFIED GAS. SLIGHT ETHEREAL
    ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI OR ALKALINE EARTH METALS-POWDERED AL, ZN, BE, ETC.
Stability Condition to Avoid:AVOID OPEN FLAMES AND HIGH TEMPERATURES.
Hazardous Decomposition Products:HYDROCHLORIC, HYDROFLUORIC ACIDS AND
    POSSIBLY CARBONYL HALIDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
    AND FEDERAL REGULATIONS. MANUFACTURER RECOMMENDS RECLAIMING BY
    DISTILLATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***