===================== Product Identification =====================
MSDS NAME:FAULT-FINDER DEVELOPER 1033
NIIN:00-782-2740
MSDS Number: BFPPQ
=== Responsible Party ===
Company:CROWN INDUSTRIAL PRODUCTS COMPANY
Address:STATE LINE ROAD
City:HEBRON
State:IL
ZIP:60034
Country:US
CAGE:92381
=== Contractor Identification ===
Company:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381
============= Composition/Information on Ingredients =============
Name:SYNTHETIC SILICATE POWDERS
Fraction by Wt: 5%
Name:SOLVENT ALCOHOL
Fraction by Wt: 10%
ACGIH TLV:400 PPM
Name:KETONES
Fraction by Wt: 35%
ACGIH TLV:200 PPM
Name:HALOGENATED HYDROCARBONS PROPELLANT
Fraction by Wt: 50%
ACGIH TLV:1000 PPM
===================== Hazards Identification =====================
Effects of Overexposure:IRRITATION OF
NOSE/THROAT,EYES.HEADACHE,NAUSEA,DIZZINESS.POSSIBLE
NARCOSIS,POSSIBLE CARDIAC ARRHYTHM
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR,CALL A DOCTOR.GIVE ARTIFICIAL RESPIRATION
IF NECESSARY.DO NOT GIVE EPINEPHRINE OR SMILAR DRUGS.IF SWALLOWED
INDUCE VOMITING,CALL A DOCTOR.SKIN OR EYE CONTACT:FLUSH WELL WITH
WATER.
===================== Fire Fighting Measures =====================
Flash Point:25F-65F TOC
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRE.TYPE
FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TREAT CONTAINERS AS CYLINDERK OF
COMPRESSED GAS.
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH SPILL AWAY WITH WATER
====================== Handling and Storage ======================
Handling and Storage Precautions:AEROSOL CONTAINER.DO NOT STORE IN
DIRECT SUNLIGHT, NEAR OPEN FLAME OR RADIATOR.
Other Precautions:DO NOT STORE AT TEMPERATURES OVER 120F.AVOID
EXCESSIVE INHALATION.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL-YES, GENERAL-YES
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:EYE BATH;SAFETY SHOWER.
Supplemental Safety and Health
THIS PRODUCT 1033 IS ONE OF THREE PRODUCTS WHICH MAKE UP AN INSPECTION
PENETRANT KIT GROUP VII.THE OTHER TWO PRODUCTS ARE 1032 AND
1031WHICH ARE PENETRANT AND CLEANER RESPECTIVELY.
================== Physical/Chemical Properties ==================
HCC:V3
Boiling Pt:B.P. Text:175
Vapor Density:2.5
Spec Gravity:0.806
Evaporation Rate & Reference:5.7-BUTYL ACETATE
Solubility in Water:26.8
Appearance and Odor:CLEAR LIQUID,NONRESIDUAL ODOR
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALIS
Stability Condition to Avoid:OPEN FLAMES OR SPARKS.
==================== Disposal Considerations ====================
Waste Disposal Methods:AEROSOL CONTAINER:DO NOT PUNCTURE OR
INCINERATE.WHEN LIQUID IS ALL EXPELLED,CONTINUE TO DEPRESS BUTTON
UNTIL ALL GAS IS EXPELLED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|