=====================  Product Identification  =====================

MSDS NAME:F50;SILICONE FLUID
NIIN:00-782-3946
MSDS Number: BFPQW
=== Responsible Party ===
Company:GENERAL ELECTRIC CO., SILICONE PRODUCT DIV.
Address:HUDSON RIVER ROAD
City:WATERFORD
State:NY
ZIP:12188
Country:US
Info Phone Num:518-237-3330
Emergency Phone Num:518-237-3330
Preparer's Name:DA POLSINELLI
CAGE:01139
=== Contractor Identification ===
Company:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Name:CHLOROPHENYLMETHYLSILOXYCOPOLYMER
CAS:68957-05-1
Fraction by Wt: 80-99%
Other REC Limits:NONE SPECIFIED

Name:OTHER COMPONENTS (TYPE NOT SPECIFIED)
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:UNKNOWN  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MILD IRRITATION OF EYES & SKIN. 
    CHRONIC:NO DATA AVAILABLE.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:SEE HEALTH HAZARDS DATA.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
    GET MEDICAL ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER
    FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION.
    SKIN:REMOVE  CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER. IF
    IRRITATION PERSISTS, GET MEDICAL ADVICE.  INGESTION:DO NOT INDUCE
    VOMITING. GIVE NOTHING BY MOUTH IF UNCONSCIOUS. GET IMMEDIATE
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>550F/287C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
    FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
    CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:NONE NOTED;COMBUSTION OR HEAT OF FIRE MAY
    PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;WIPE,SCRAPE OR
    USE SUITABLE INERT ABSORBENT MATERIAL AND RECOVER FOR PROPER
    DISPOSAL.USE SOME DETERGENT & WATER;WASH THE SURFACES TO REDUCE
    SLIPPING HAZARDS.
Neutralizing Agent:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
    AREA. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. PROTECT
    CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT BREATHE MIST. AVOID
    PROLONGED OR REPEATED BREATHING OF VAPOR. AVOID CONTACT WITH EYES.
    USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY NEEDED IN CASE OF AN ADEQUATE
    VENTILATION.
Ventilation:LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER,WORK
    CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
    FOOTWEAR.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
    NOT BREATHE VAPORS OR MISTS.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>500F/260C
Vapor Pres:1.0 MM HG
Vapor Density:NONE
Spec Gravity:1.025
Evaporation Rate & Reference:>1.0,BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID,ODORLESS
Percent Volatiles by Volume:<1.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT SPECIFIED
Stability Condition to Avoid:EXTREMELY HIGH TEMPERATURES
Hazardous Decomposition
    Products:CO*2,CO,SIO*2,FORMALDEHYDE,CHLORINATED,BENZENES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE MADE
    IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***