=====================  Product Identification  =====================

MSDS NAME:PRIMER COATING LAC RUST INHIBITING
NIIN:00-290-4078
MSDS Number: BHMKJ
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
OSHA PEL:100 PPM

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE)	(SARA
    III)
CAS:117-81-7
RTECS #:TI0350000
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:ISOBUTYL ACETATE  (SARA III)
CAS:110-19-0
RTECS #:AI4025000
OSHA PEL:150 PPM
ACGIH TLV:150 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ZINC CHROMATE
CAS:13530-65-9
RTECS #:GB3290000
OSHA PEL:0.1 MG/M3 (CRO3)
ACGIH TLV:0.01MG/M3(CR)A1;9192

Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:SILICA, CRYSTALLINE - CRISTOBALITE
CAS:14464-46-1
RTECS #:VV7325000
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.05 MG/M3 RDUST9293

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:NITROCELLULOSE
CAS:9004-70-0
RTECS #:QW0970000
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:ALIPHATIC HYDROCARBON				       
    (VP 12 MM HG @ 20 DEG.C)
CAS:64742-89-8
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:VOC. ORGANIC CMPD 4.8 LB/GAL LESS WATER & NPRS* 576 G/L    
    LESS WATER VOC. 16.2 LB/GAL SOLIDS 1944 G/L SOLIDS CALCU
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES
Health Hazards Acute and Chronic:CRYSTALLINE SILICA MAY CAUSE
    PNEOMONIOSIS, A PROGRS DISABLING LUNG DISEASE. TOL-UENE MAY CAUSE
    LIVER DAMAGE. ASPIRATION OF MATL INTO LUNG MAY CAUSE CHEMICAL
    PNEUMONITIS WHICH CAN BE FATAL. MAY CAUSE A CUTE CENTRL NERVS.
    SYST. DEPRESS. OVEREXPOSR TO INSOLUBLE CHROMATES MAY CAUSE LUNG
    CANCER. MISUSE MAY BE HARMFUL/FATAL
Explanation of Carcinogenicity:DI(2-ETHYLEXYL) PHTALATE IS LISTED AS A
    POTENTIAL CARCINOGENZINC CHROMATE HAS BEEN LISTED AS A POTENTIAL
    CARCINOGEN
Effects of Overexposure:EYE: MAY CAUSE IRRITATION.		       
				    SKIN: MAY CAUSE IRRITATION AND
    DEFATTING OF SKIN.				     INHAL: HEADACHES,
    DIZZINESSS, NAUSEA, AN D CONFUSIONINGST: GASTROINTESTINAL
    IRRITATION, NAUSEA, AND VOMITING.
Medical Cond Aggravated by Exposure:PREXISTING RESPIR. CONDITIONS MAY
    BE AGGRAVATED   BY EXPOSURE CRYSTALLINE SILICA.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/LG AMNTS OF WTR FOR 15 MINS. LIFTING EYELIDS,GET
    MEDICAL ATTENTION.SKIN: WASH AFFCT AREA W/SOAP & WTR,REMOVE
    CONTAMIN. CLOTHES,GET MEDICAL ATTN.   INHAL: REMOVE TO FRESH AIR
    IMMED., GIVE  ARTIFICIAL RESP. KEEP WARM/QUIET, GETMEDICAL
    ATTENTION.							       
	INGST: DO NOT INDUCE VOMITING, CALL A PHYSICIAN OR HOSPITAL
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:20F/-6.67C
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISHER DESIGNED TO
    EXTINGUISH FLAMMABLE LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
    FIRES.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. USE
    WATER TO COOL EXPOSED CONTAINERS TOPREVENT PRESSURE BUILD-UP AND
    POSSIBLE EXPLOSION. FOG NOZZLE PREFERRED W/WATER.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
    MAY CAUSE HEALTH HAZARD. GET MEDICAL ATT ENTION. KEEP CONTAINERS
    CLOSED. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS, FLAMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. DIKE &
    CONTAIN SPILL W/INERT MATL. USE ONLY NON SPARKING TOOLS.  PLACE
    ABSORBENT DIKING MATL IN COVERED METAL CONT-AINERS FOR DISPOSAL.
    PREVNT CONTAMIN. OF SEWERS,   STREAMS, & GROUNDWTR W/ SPILLED MATL
    ORUSED ABSRB

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LG QTY
    IN COMPLIANCEW/OSHA 29CFR1910.106. CLOSE CONTAINER AFTER EACH  USE.
    NEVER USE PRESSURE TO EMPTY.
Other Precautions:DO NOT TAKE INTERNALLY. EMPTY CONTAINERS MUST NOT  BE
    WASHED & REUSED FOR ANY   PURPOSE. CONTAINERS SHOULD BE GROUNDED &
    BONDED TO THE RECEIVING CONTAINERS.    DO NOT WELD, BRAZE OR CUT ON
    EMPTY CONTA INERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESTRICTED AREAS USE A NIOSH APPROVED CHEMICAL
    CARTRIDGE RESPIRATOR.	     FOR SPRAYING USE A MECHANICAL
    PREFILTER.					      CONFINED AREAS
    USE A NIOSH/MSHA APPROVED  AIR SUPPLIED RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION & LOCAL EXHAUST VENTILATION IN
    SUF-FICIENT VOLUME AND PATTERN
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:WEAR SAFETY GLASSES
Other Protective Equipment:NOT LIKELY TO BE NEEDED
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:180F-302F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING,INCLUDING WHEN HEATED BY
    WELDING/CUTTING, WILL PRO- DUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND FLAME

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FEDERAL,STATE & LOCAL
    REG-ULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.	  INCINERATE IN
    EPA PERMITTED FACILITY. CONTAMINATEDABSORBANT MAY BE DISPOSED IN A
    HAZARDOUS WASTE	LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***