=====================  Product Identification  =====================

MSDS NAME:PAINT, ENAMEL, GLOSS, GRAY 16187, TT-E-489G
NIIN:00-286-7731
MSDS Number: BHMJY
=== Responsible Party ===
Company:CHEMRAY COATING CORP
Address:209 N. MICHIGAN AVE
Box:NA
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:FRED ARMSTRONG
CAGE:33832
=== Contractor Identification ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832

=============  Composition/Information on Ingredients  =============

Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 46%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Name:ADDITIVES (LEAD DRIER-.05MG/M3 AIR; COBALT-0.1MG/M3 AIR)
Fraction by Wt: <1.0%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HIGH VAPOR CONCENTRATIONS (OVER
    1000 PPM) ARE IRRITATIONG TO THE EYE AND RESPIRATORY TRACT. MAY
    CAUSE HEADACHES AND DIZZINESS. PROLONGED SKIN CONTACT IRRITATES.
    CHRONIC: NONE STATED.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
    LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: IF OVERCOME BY VAPORS, REMOVE TO FRESH AIR AND
    CALL PHYSICIAN. EYE: FLUSH WITH WATER FOR 15 MINUTES OR UNTIL
    IRRITATION SUBSIDES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
    SKIN: WASH W ITH SOAP AND WATER. GET MEDICAL ATTENTION. REMOVE
    CONTAMINATED CLOTHING AND CLEAN BEFORE REUSE. INGESTION: DO NOT
    INDUCE VOMITING, CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:103F,39C
Autoignition Temp:Autoignition Temp Text:473F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
    FOG.
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING EQUIPMENT FOR
    ENCLOSED CONTAINERS WITH WATER SPRAY. AVOID BREATHING VAPOR OR
    FUMES. SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
    SPRAY TO DISPERSE THE VAPORS FROM FIRE FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KDDP FROM HEAT,
    SPARKS AND OPEN FLAME. ADD ABSORBENT (SAND, EARTH, SAWDUST) TO
    SPILL. VENTILATE AREA. IF LARGE SPILL, KEEP PRODUCT FROM ENTERING
    SEWERS AND WATERCOURSES BY	DIKING. NOTIFY AUTHORITIES.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
    FLAMES. KEEP CONTAINER CLOSED WHEN NOT IN USE. EMPTY CONTAINERS MAY
    CONTAIN PRODUCT, HANDLE ACCORDINGLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
    INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE HYDROCARBON VAPOR CANISTER OR SUPPLIED AIR
    RESPIRATORY IN CONFINED AREA.
Ventilation:LOCAL EXHAUST WITH A FACE VELOCITY OF 60 FPM. USE
    EXPLOSION-PROOF EQUIPMENT FOR (GENERAL) MECHANICAL EXHAUSTS.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR OTHER
    CLOTHING TO AVOID REPEATED SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING OR
    SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEEP CONTAINER CLOSED WHEN NOT IN USE.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:308F,153C
Melt/Freeze Pt:M.P/F.P Text:0F,-18C
Vapor Pres:<10
Vapor Density:4.8
Spec Gravity:1.04
Viscosity:70-85 KU
Evaporation Rate & Reference:0.9 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY LIQUID, PAINT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIALS WHEN HEATED TO DECOMPOSITION.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
    THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***