=====================  Product Identification  =====================

MSDS NAME:ENAMEL, ALKYD, GLOSS, LOW VOC CONTENT
NIIN:00-286-7749
MSDS Number: BHMJZ
=== Responsible Party ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:NA
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:201-245-1111
Preparer's Name:FRED ARMSTRONG
CAGE:33832
=== Contractor Identification ===
Company:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM SOLVENT, M.S. 66
CAS:8052-41-3
Fraction by Wt: 15%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Name:SUPER HIFLASH NAPTHA, PETROLEUM SOLVENT
CAS:64742-95-6
Fraction by Wt: 6%
OSHA PEL:200 PPM
ACGIH TLV:100 PPM

Name:PM ACETATE, (ESTER SOLVENT)
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 9%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

Name:VOC. ORGANIC CMPD 3.0 LB/GAL LESS WATER & NPRS* 360 G/L    
    MAX VOC. AFTER THINNING = 3.4 LBS/GLS OR 408 GRAMS/LITER
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Health Hazards Acute and Chronic:OVEREXPOSURE-NAUSEA, HEADACHE,
    DIZZINESS CAUSED BY OVER INHALATION.
Effects of Overexposure:OVEREXPOSURE-NAUSEA, HEADACHE, DIZZINESS CAUSED
    BY OVER INHALATION.
Medical Cond Aggravated by Exposure:NONE GENERALLY KNOWN

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH WITH WATER 15 MINUTES OR UNTIL IRRITATION
    SUBSIDES. IF IRRITATION PERSISTS, CALL PHYSICIAN. SKIN CONTACT:
    REMOVE CONTAMINATED CLOTHING & WASHTHOROUGHLY WITH SOAP & WATER.
    INHALATION : IF OVERCOME BY VAPORS, REMOVE TO FRESHAIR, CALL
    PHYSICIAN. AND INGESTION: DO NOT INDUCE VOMITING, CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:103 F/ 40 C
Autoignition Temp:Autoignition Temp Text:***
Lower Limits:0.7
Upper Limits:13.1
Extinguishing Media:CARBON DIOXIDE, FOAM, WATER FOG, DRY CHEMICAL
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING EQUIPMENT FOR
    ENCLOSED CONTAINERS WITH WATER SPRAY.  AVOID BREATHING VAPORS
    AND/OR FUMES.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
    SPRAY TO DISPERSE THE VAPORS FROM FIRE  FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP FROM HEAT,
    SPARK& OPEN FLAME. ADD ABSORBENT (SAND, EARTH, SAWDUST)TO SPILL.
    VENTILATE AREA (OPEN WINDOW, DOORS). IF LARGE SPILL KEEP FROM
    ENTERING SEWERS/WATERCOURSES BY DIKING. ADVISE AUTHORITIES IF
    PRODUCT ENTERS.
Neutralizing Agent:NA

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES. KEEP
    COOL, DRY, WELL VENTILATED. AVOID DIRECT SUNLIGHT & EXTREME 
    TEMPERATURES, HOT OR COLD.
Other Precautions:AVOID EYE AND/OR SKIN CONTACT. AVOID INHALATION
    AND/OR INGESTION OF MISTS, SPRAYOR VAPORS. AVOID BREATHING SANDING
    OR BLASTING DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE HYDROCARBON VAPOR CANISTER OR SUPPLIED AIR
    RESPIRATOR IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST-FACE VELOCITY 60FPM, SPECIAL-USE ONLY WITH
    ADEQUATE VENTILATION. MECHANICAL-USE EXPLOSION PROOF EQUIPMENT
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR CLOTHING
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:308F/155C
Melt/Freeze Pt:M.P/F.P Text:0F/-17.8C
Decomp Temp:Decomp Text:600F/316C
Vapor Pres:<10
Vapor Density:4.8
Spec Gravity:1.140
pH:NA
Viscosity:70-85 KU
Evaporation Rate & Reference:0.09
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MEDIUM GRAY LIQUID WITH KEROSENE ODOR
Percent Volatiles by Volume:43.5
Corrosion Rate:NA

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIAL WHEN HEATED TO DECOMP-    OSITION
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
    REGULA-TIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVEDDISPOSAL
    SITE OR FACILITY. DISPOSE IN CONFORMITY  WITH STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***