=====================  Product Identification  =====================

MSDS NAME:ENAMEL ALKYD S.G. BLACK 27038 ID 745702
NIIN:00-297-0591
MSDS Number: BHMLR
=== Responsible Party ===
Company:PRATT AND LAMBERT INC
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:716-873-6000 DOT EMER 8002553924
Preparer's Name:W.A. ELLISON
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:VM&P NAPHTHA (LIGROINE)
CAS:8032-32-4
RTECS #:OI6180000
OSHA PEL:300 PPM/400 STEL
ACGIH TLV:300 PPM; 9192

Name:MINERAL SPIRITS					       
    (VAPOR PRESSURE 2 MM HG @ 20 DEG C)
CAS:64475-85-0
RTECS #:PY8240000
OSHA PEL:500 PPM 2950 MG/CU M
ACGIH TLV:100 PPM  525 MH/CU M

Name:VOC. ORGANIC CMPD 3.8 LB/GL LESS WATER & NPRS* 456 G/L LESS
    WATER VOC 9.0 LB/GAL SOLIDS 1080 G/L SOLIDS CALCULATED.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES
Health Hazards Acute and Chronic:OVEREXP TO LEAD MAY RESULT IN SEVERE
    DAMAGE TO BLOOD FORMING, NERVOUS, URINARY, AND REPO SYS. COMMON
    SYMP INCL:LOSS OF APPETITE, METALLIC TASTE IN MOUTH, ANXIETY,
    CONSTIPATION, NAUSEA, WEAKNESS, INSOM NIA, HEADACHE, MUSCLE AND
    JOINT PAIN, FINE TREMORS, NUMBNESS, DIZZINESS, HYPERACTIVITY AND
    COLIC.
Explanation of Carcinogenicity:CHROMIUM & CERTAIN CHROMIUM COMPOUNDS ,
    LEAD CHROMATE AND CRYSTALLINE SILICATE ARE LISTED AS POTENTIAL
    CARCINOGENS.
Effects of Overexposure:SWALLOWING:    GASTROINTESTINAL
    IRRITATION,NAUSEA AND VOMITING. ASPIRATION	    INTO THE LUNGS MAY
    CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.	  INHAL: NOSE
    AND THROAT IRRITATION. HIGH CONCENT RATIONS MAY CAUSE CENTRAL
    NERVOUS SYSTEMDEPRESSION	EYE: IRRITATION SKIN: MAY CAUSE
    DEFATTING AND IRRITATION OF SKIN.
Medical Cond Aggravated by Exposure:PREXISTING KIDNEY CONDITIONS MAY BE
    AGGRAVATED BY EXPOSURES TO LEAD.  PREXISTING RESPIRATORY CONDITIONS
    MAY BE AGGRAVATED BY EXPOSURES TO LEAD.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: DO NOT INDUCE VOMITING. SEEK MEDICAL ADVISE
    IMMEDIATELY. INHAL: REMOVE TO FRESH AIR IMMEDIATELY. BREATHING
    STOPPED GIVE CPR. KEEP WARM & QUIET. EYE:FLUSH W/LARGE AMTS OF
    WATER, LIFTING UPP ER & LOWER LIDS FOR 15 MIN. SEEK
    MEDICALATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED
    AREA WITH SOAP AND WATER. OBTAIN MEDICAL ATTENTION IF IRRITATION
    PERSISTS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:> 102F/ 39C
Extinguishing Media:CLASS B FIRE EXTINGUISHERS TO EXTINGUISH FLAMMABLE
    LIQUID FIRES.  POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. WATER
    MAY BE INNEFECTIVE, BUT MAY BE USED TO PREVENT PRESSURE BUILD-UP.
    IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXP TO DECOMP PRODUCTS MAY CAUSE
    HEALTH HAZ.SYMPT MAYNOT BE IMMED APPARENT. SEEK MED ATTN.KEEP
    CONTAINERS CLSD.ISOLATE FRM HEAT,SPARKS.CONTAINERS MAY EXPLOD

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE ALL IGNITION
    SOURCES. DIKE AND CONTAIN SPILL WITH INERT MATERIAL. TRANSFER
    LIQUIDS TO COVERED METAL CONTAINERS FOR RECOVERY OR DISPOSAL OR
    REMOVE W/INERT ABSORBENT. USE NON-SPARKING TOOLS. PREVENT GROUND
    CONTAMINATION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DONOT STORE ABOVE 95 DEGREES F. STORE
    LARGE QTYS	IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DONOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH
    USE. DONOT BREATHE SANDING DUST. WASH HANDS AND FACE THROUGHLY
    BEFORE EATING/DRINKING. EMTY CONTAINERS MUST NOT BE WASHED AND
    REUSED. CONTAINERS SHOUL D BE GROUNDED/BONDED . DONOT WELD CONT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:REFER TO OSHA STD FOR SPECIFIC RESPIRATORY
    PROTECT RQMTS FOR LEAD.29CFR1910.1025IN RESTRICTED VENT AREAS NIOSH
    APPROVED CHEM CARTRIDGE RESPIRATOR MAYBE REQD.   CONFINED AREAS USE
    A NIOSH/MSHA APPROVED  AIR SUPPLIED RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION AND LOCAL EXHAUST VENTILATION IN
    SUFFICIENT VOLUME TO MAINTAIN CONCENTRATIONS OF HAZ SUBSTANCES
Protective Gloves:SOLVENT IMPERMEABLE GLOVES
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:280-388F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, HEATED BY WELDING OR CUTTING,
    WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON DIOXIDE, OXIDES OF
    LEAD GENERATED.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY. DONOT
    INCINERATE CLOSED CONTAINERS. OBSERVE PRECAUTIONS FOR DISPOSAL OF
    FLAMMABLE MATERIALS. CONTAMINATED ABSORBANT MAY BE DISPOSED IN A
    HAZARDOUS WASTE LAND FILL.DISPOSE ONLY IAW STATE, LOCAL,
    FEDREGULATION

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***