=====================  Product Identification  =====================

MSDS NAME:ENAMEL ALKYD LUST YELLOW 33538 ID 741310
NIIN:00-297-0570
MSDS Number: BHMLF
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS					       
    (VP 2 MM HG @ 20 DEG.C)
CAS:64475-85-0
RTECS #:PY8240000
OSHA PEL:500 PPM 2950 MG/CU.M
ACGIH TLV:100 PPM 525 MG/CU.M.

Name:SILICA, CRYSTALLINE - CRISTOBALITE
CAS:14464-46-1
RTECS #:VV7325000
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.05 MG/M3 RDUST9293

Name:LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
    1910.1025),(CRO3 CEILING 0.1 MG/M3)
CAS:7758-97-6
RTECS #:GB2975000
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.05MG/M3(CR)A2;8990

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:SILICA, AMORPHOUS, DIATOMACEOUS EARTH, CONTAINING LESS THAN
    1% CRYSTALLINE SILICA
CAS:61790-53-2
RTECS #:HL8600000
OSHA PEL:20 MPPCF
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:VOC. ORGANIC CMPD 3.67 LB/GL LESS WATER & NPRS* 440 G/L
    LESSWATER VOC 8.33 LB/GAL SOLIDS 1000 G/L SOLIDS CALCULATED.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING: CAN CAUSE GASTROINTESTINAL
    IRR/NAUSEA/VOMIT. ASPIRATION OF MAT'L MAYCAUSE CHEM PNEUMONITIS.
    INHALATION: NOSE/THROAT IRRITA. HIGH CONCENTRATION MAY  CAUSE
    CENTRAL NERVOUS SYSTEM DEPRESSION  CHAR BY
    HEADACHES/DIZZINESS/NAUSEA/CONFUSION. EYE: MAY CAUSE EYE IRRITA.
    SKIN: MAY CAUSE DEFATTING AND IRRITATION.
Explanation of Carcinogenicity:IARC-CRYSTALLINE SILICA, LMT EVI
    CARCINOGENICITY IN HUMANS. TITANIUM DIOXIDE-NOT A POTENT
    CARCINOGEN-NTP,IARC,OSHA,ACGIH
Effects of Overexposure:REPEATED EXPOSURE TO CRYSTALLINE SILICA MAY
    CAUSE PNEUMOCONIOSIS. OCCUPATIONAL	OVEREXPOSURE TO SOLVENTS ASSO
    W/PERM BRAIN/NERVOUS SYSTEM DAMAGE. INTENTIONAL   MISUSE BY
    CONCENTRATING/INHALING CONT MA Y BE HARMFUL/FATAL. INSOLUBLE
    CHROMATESMAY CAUSE LUNG CANCER. LEAD-BLOOD DAMAGE &
    NERVOUS/URINARY/REPRODUCTIVE SYSTEMS.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY CONDITIONS
    MAY BE AGGRA-  VATED BY EXPOSURE TO CRYSTALLINE SILICA.
    PREEXIST-ING KIDNEY CONDITIONS MAY BE AGGRAVATED BY       
    EXPOSURES TO LEAD.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: DO NOT INDUCE VOMITING/GET MED ATTN. INHALATION:
    REMOVE TO FRESH AIRIF BREATHING HAS STOPPED GIVE CPR. GET MED ATTN.
    EYE: FLUSH W/WATER FOR 15 MIN  LIFTING UPPER/LOWER LIDS. GET MED
    ATTN.  SKIN: REMOVE CONTAMINATED CLOTHING.WASH AFFECTED AREA.
    OBTAIN MED ATTN IF IRR'N PERSISTS. TREATMENT REQ FOR OVER- 
    EXPOSURE S/B DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL
    CONDITIONS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>102F 38.89C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS. POLYMER FOAM
    IS	      PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
    TO COOL CONT TO PREVENT POSSIBLE AUTO-IGNITION OR EXPLOSION. IF
    WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT/ELEC
    EQUIP/SPARKS/FLAME. CONT MAY EXPLODE WHEN EXPOSED TO     HEAT.
    OVEREXPOSURE TO DECOMP PRODUCTS MAY CAUSE HEALTH HAZ. OBTAIN MED
    ATTN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM ALL IGNITION SOURCES. DIKE/CONTAIN SPILL
    WITHINERT MAT'L. TRANSFER LIQ'S/ABSORBENT DIKING MAT'LIN COVERED
    METAL CONT'S FOR RECOVERY/DISPOSAL. USEONLY NON-SPARKING TOOLS.
    PREVENT CONTAM OF SEWERS/ STREAMS/GROUNDWATER W/SPILLED MAT'L/USED
    ABSORBENT

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95 DEGREES F. STORE
    LARGE      QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:DO NOT BREATHE SANDING DUST OR REUSE EMPTY CONT. DO
    NOT TAKE INTERN. CONT'ER S/BGROUNDED AND BONDED TO THE RECEIVING
    CONTAINER. DO NOT WELD/BRAZE OR CUT CONT'R.NEVER USE PRESSURE TO
    EMPTY. DRUM IS NOT	A PRESSURE VESSEL. CLOSE AFTER EA USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WELL VENTILATED AREA-RESP NOT REQ. RESTRICTED
    VENT-NIOSH CHEMICAL CARTRIDGE MAY BE REQ. IF SPRAYING, MECH
    PREFILTER MAY BE REQ. IF TLV ARE EXCEEDED, USE A PROP FITTED
    NIOSH/MSHA RESP W/APPROP PROTECTI ON FACTOR. SEE OSHA 29 CFR
    1910.134.
Ventilation:PROVIDE DILUTION/LOCAL EXHAUST VENTILATION TO KEEP
    CONCENTRAOF HAZARDOUS SUBSTANCES BELOW EXPOSURE LIMITS STATED.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:WEAR SAFETY SPECTACLES.
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH WITH SOAP AND WATER HANDS/FACE THROUGHLY
    BEFORE EATING OR DRINKING.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:280F 388F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:55

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, INCLUD WHEN HEATED BY
    WELDING/CUTTING, WILL PRODUCESMOKE/CARBON MONOXIDE/CARBON
    DIOXIDE/OXIDES OF CHROMIUM/LEAD
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY.
    DISPOSEONLY IAW FED/STATE/LOCAL REGS. DO NOT INCINERATE  CLOSED
    CONTAINERS. OBSERVE PRECAUTIONS FOR DIS-   POSAL OF FLAMMABLE
    MAT'S. CONTAMINATED ABSORBENT   MAY BE DISPOSED IN A HAZARDOUS
    WASTE LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***