=====================  Product Identification  =====================

MSDS NAME:EN ALKYD LUST QD BLUE 35109 ID744508
NIIN:00-297-0801
MSDS Number: BHMLX
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:NAPHTA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 10%
OSHA PEL:100 PPM

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: 10%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: < 5%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ALIPHATIC HYDROCARBON				       
    (VP 12 MM HG @ 20 DEG.C)
CAS:64742-89-8
Fraction by Wt: 15%
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 20%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: < 1%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:VOC. ORGANIC CMPD 4.05 LB/GL LESS WATER & NPRS* 486 G/L
    LESSWATER VOC 10.74 LB/GAL SOLIDS 1289 G/L SOLIDS CALCULATED

Name:MINERAL SPIRITS					       
    (VAPOR PRESSURE 2 MM HG @ 20 DEG C)
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: < 5%
OSHA PEL:500 PPM 2950 MG/CU M
ACGIH TLV:100 PPM  525 MG/CU M

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING: GASTROINTESTINAL
    IRRITATION, NAUSEA, VOMITING. ASPIRATION OF MATERIAL INTO LUNG MAY
    CAUSE CHEMICAL PNEUMONITIS. INHALATION: NOSE/THROAT IRRITATION. MAY
    CAUSE ACUTE CENTRAL NERVOUS SYSTEM D EPRESSION. EYE: MAY CAUSE EYE
    IRRITATIONSKIN: MAY CAUSE DEFATTING AND IRRITATION OF THE SKIN.
Effects of Overexposure:REPORTS HAVE ASSOCIATED PROLONGED AND REPEATED
    OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND
    NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIVERATELY INHYALING
    THE CONTENTS MAY BE HA RMFUL OR FATAL. TOLUENE HAS BEEN FOUND TO
    CAUSE KIDNEY, LUNG AND SPLEEN DAMAGE IN LAB ANIMALS.
Medical Cond Aggravated by Exposure:PREXISTING RESPIRATORY CONDITIONS
    MAY BE AGGRAVATED BY EXPOSURE TO LEAD

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: CALL POISON CONTROL CENTER OR EMERGENCY ROOM OR
    PHYSICIAN IMMED.	INHALATION: REMOVE TO FRESH AIR. IF BREATHING
    HAS STOPPED GIVE CPR. KEEP WARM & QUIET. GET MED ATTN IMMED.  EYE:
    FLUSH W ITH LARGE AMOUNTS OF WATER LIFTING UPPERAND LOWER LIDS FOR
    15 MIN. GET MED ATTN. SKIN: REMOVE CONTAMINATED CLOTHING. WA SH
    WITH SOAP AND WATER. GET MED ATTN. IF IRRITATION PERSISTS.

=====================  Fire Fighting Measures  =====================

Flash Point:20F / -6.67C
Extinguishing Media:CLASS B FIRE EXTINGUISHERS DESIGNED TO EXTINGUISH
    FLAMMABLE LIQUID FIRES.  POLYMER FOAM IS PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. USE
    WATER TO COOL EXPOSED CONTAINERS TOPREVENT PRESSURE BUILD-UP AND
    POSSIBLE EXPLOSION. IF WATER USED FOG NOZZLES PREF
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSTION PRODUCTS MAY
    CAUSE A HEALTH HAZARD. OBTAIN MEDICAL ATTENTION. WARNING:
    FLAMMABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES ELECTRICIAL AND IGNITION
    SOURCES. DIKE SPILL WITH INERT MATERIAL. TRANSFER OR RECOVER IN
    METAL CONTATINERS, FOR DISPOSAL. USE ONLY NON-SPARKING TOOLS.
    PREVENT CONTAMINATION OF SE WERS, STREAMS, GROUNDWATER W/SPILLED
    MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95 F. STORE LARGE
    QUANTITIES INCOMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:CLOSE CONTR AFTER EACH USE. DO NOT BREATH SANDING
    DUST. EMPTY CONTR NOT TO BE REUSED ANY PURPOSE. CONTRS SHOULD BE
    GROUNDED & BONDED TO THE REC CONTR. DO NOT WELD/BRAZE/CUT ON CONTR.
    NEVER USE PRESSUR E TO EMPTY. DRUM NOT A PRESSURE VESSEL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:GEN EXP MAY NOT REQ THE USE OF RESP PROT. RESTR
    VENT AREAS A NIOSH APP CHEM CARTRIDGE RES MAY BE REQ.SEE OSHA STD
    FOR SPEC RESP PROT REQ FOR LEAD. 29CFR1910.1025 COND SUCH AS
    SPRAYING A	A MECHANICAL  PREFILTER MAY BE REQUIRED. CONFINED
Ventilation:GENERAL DILUTION AND LOCAL EXHAUSE VENTILATION TO MAINTAIN 
    HAZ SUBSTANCES BELOW LOWEST EXPOSURE LIMITS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES
Eye Protection:SAFETY SPECTACLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT. SEE
    OSHA STANDARD FOR  LEAD.
Supplemental Safety and Health
RESPIRATION PROTECTION CONTINUED: AREAS USE A NIOSH/MSHA APPROVED AIR
    SUPPLIED RESPIRATOR.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:203F / 300F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING, W/HEATED BY WELDING/CUTTING
    WILL PROD SMOKE CARBON MONOXIDE AND CARBON DIOXIDE. OXIDE OF LEAD
    MAY BE GENERATED
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED FACILITY. RCRA
    C LASSIFICATION DOO1. CONTAMINATED ABSORBANT DISPOSED IN A
    HAZARDOUS WASTE LANDFILL. DO NOT INCINERATECLOSED CONTAINERS.
    DISPOSE ONLY IAW FEDERAL, STATE LOCAL REG. HAZARDOUS WASTE NUMBER
    WOULDBE D008.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***