MSDS NAME:ENAMEL EXTERIOR DECK GRAY ID756606
NIIN:00-286-9083
MSDS Number: BHMKC
=== Responsible Party ===
CAGE:76381
=== Contractor Identification ===
Company:ANDEX CORP
Address:2420 E OAKTON ST SUITE E
Box:UNKNOW
City:ARLINGTON HEIGHTS
State:IL
ZIP:60004-4820
Country:US
CAGE:61169
Company:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Fire Fighting Measures  =====================

Flash Point:20F/-6.67C
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS,CARBON
    DIOXIDE,DRY CHEMICAL,ALCOHOL FOAM. POLYMER FOAM IS PREFERRED FOR
    LG. FIRES
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS. WATER
    MAY BE INEFFECTIVE,MAY BE USED TOCOOL EXPOSED CONTAINERS. IF WATER
    IS USED, FOG NOZZLES ARE PREFERRABLE.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELECTRICAL EQUIPMENT,SPARKS &FLAME. CLOSED CONTAINERS
    MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:167-302F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:77

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, ALKALINE MATERIALS, OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT AND SOURCES OF IGNITION
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
    WELDING OR CUTTING, WILL  PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:HEAT SPARKS AND FLAME

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***