=====================  Product Identification  =====================

MSDS NAME:TT-P-102E TYPE II, WHITE REV '83 ID 700W15
NIIN:00-290-6643
MSDS Number: BHMKL
=== Responsible Party ===
Company:GRIGG'S PAINT
Address:3602 S. 16TH PLACE
City:PHOENIX
State:AZ
ZIP:85040
Country:US
Info Phone Num:602-243-3293
Emergency Phone Num:602-243-3293
Preparer's Name:ROBERT COMMISSO
CAGE:58962
=== Contractor Identification ===
Company:GRIGG'S PAINT
Address:3602 S. 16TH PLACE
City:PHOENIX
State:AZ
ZIP:85040
Country:US
Phone:602-243-3293
CAGE:58962

=============  Composition/Information on Ingredients  =============

Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:YES
Health Hazards Acute and Chronic:ASPIRATION OF THIS PRODUCT INTO THE
    LUNGS MAY CAUSE PNEUMONITIS, PULMONARY EDEMA& HEMORRAGE. HIGH
    CONCENTR OF VAPORS MAY LEAD TO LUNG CHANGES, NAUSEA, VOMITING
    COUGH, PULMONARY IRRITATION & CENTRAL NE RVOUS SYSTEM DEPRESSION.
    MAY BE ABSORBEDTHROUGH THE SKIN.
Effects of Overexposure:EYE: CONTACT WITH VAPORS MAY CAUSE IRRITATION. 
				    SKIN: MAY CAUSE IRRITATION,
    DEFATTING & DERMITITIS.				INHALE: MAY
    CAUSE DROWSINESS, DIZZINESS,  FATIGUE, FOLLOWED BY COMA.INGESTION:
    MAY CAUSE GASTROINTESTINAL DISTURBANCES.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PRE-EXISTING
    DISEASES INVOLVING	SKIN CENTRAL NERVOUS SYSTEM, LIVER & KIDNEYS.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMEDIATELY FLUSH WITH LG AMNTS OF WTR FOR 15 MINS. SEEK
    MEDICAL ATTENTION.SKIN: WASH THOROUGHLY W/SOAP & WATER. GET MED.
    ATTN. IF IRRIT. PERSISTS.	     INHALE: DON'T ATTEMPT TO GIVE
    ANYTHING B Y MOUTH TO AN UNCONSCIOUS PERSON.INGESTION: IMMEDIATELY
    SEEK MEDICAL ATTENTION. DO NOT INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:54 F/ 12.2 C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:APPROVED GAS MASK REQUIRED FOR FIRE FIGHTERS.
    WATER MAY BE INEFFECTIVE, WATER   MAY BE USED TO COOL CONTAINERS.
    IF WATER IS USED, FOG NOZZLES ARE PREFERRABLE.
Unusual Fire/Explosion Hazard:KEEP CONTAINER TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELEC. EQUIP., SPARKS & OPEN   FLAME. CLOSED CONTAINERS
    MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP LEAK IF NO RISK INVOLVED. REMOVE ALL
    SOURCES OF IGNITION. STAY UPWIND. ABSORB WITH INERT MATER-IAL.
    FLUSH AREA WITH WATER. VENTILATE AREA FOR AT LEAST 24 HOURS OR
    UNTIL AREA HAS BEEN DECLARED     SAFE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED & UPRIGHT TO
    PREVENT LEAK- AGE. AVOID FLAMES, WELDING, OPEN LIGHTS, ETC.
Other Precautions:DON'T USE IN CONFINED AREAS, TANK OR PIT, WITHOUT
    ADEQUATE VENTILATIONS. AVOID  BREATHING VAPOR AND SPRAY MIST. AVOID
    SKIN AND EYE CONTACT.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:147 - 310 F
Vapor Density:> AIR
Spec Gravity:1.5
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS LIQUID WITH TYPICAL PAINT ODOR
Percent Volatiles by Volume:32.87

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:FLAMES, SPARKS, SMOKING AND HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:USE INERT ABSORBENT MATERIAL ON SPILLS. DISPOSE
    OFIN ACCORDANCE WITH FEDERAL, STATE AND LOCAL	REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***