F Form
Material Safety Data Sheet
Cover Sheet for Material Safety Data Sheet (MSDS)
Epoxy Resin and Aliphatic Amine Curing Agent
201Epoxy Aliph.doc
CI Chg. Index Date Owner Date Name Initials Dept. Doc. ID:
1.0 4/26/99 P. Doucette Created 4/26/99 P. Doucette PED Quality
F0201-03.doc
Reviewed 4/27/99 P. Doucette PED Quality
Released 4/27/99 P. Doucette PED Quality
Computer: File: C:\ ISO9000 Quality Management Manual\QM Forms\ F0201-03 .doc
Material Safety Data Sheet
Product: ECS 105-2, A & B
Emergency Telephone: Day: 770-451-2777 Night: 800-457-4280
Common Name (Trade name and synonyms): ECS 105-2, A & B
Chemical Name: Epoxy Resin and Aliphatic Amine Curing Agent
Chemical Family: Epoxy; Amine
CAS Number: Mixture
Section 1: Hazardous Ingredients
Component __% __ ACGIH TLV
A. Epoxy Resin with no established TLV >90
10 mg/m3
Titanium Dioxide (dispersed in resin) <4
B: Diethylene Triamine (DETA) 25-35 1 ppm (skin)
Phenol <2 5 ppm (skin)
Amines with no established TLV 45-55
Hazards: Corrosive, irritant
All ingredients are listed in the TSCA Inventory
Section 2: Physical and Chemical Characteristics
Boiling Point (掳F): >225掳F Specific Gravity(water=1): 1.00
Vapor Pressure (mm/Hg): Nil Volatiles (% by volume): 0
Vapor Density (Air=1): >1 Evaporation Rate (BuAc =1) >1
Solubility in Water: Negligible
Appearance & Odor: A White paste; characteristic odor
B: Black paste; ammoniacal odor
Section 3: Fire and Explosion Data
Flash Point (test method): >200掳F (PMCC)
Flammable Limits in Air (% by Volume): Lel: N/A Uel: N/A
Extinguishing Media: Water Spray, foam, CO2, dry chemical
Special Fire Fighting Precautions/Procedures: Avoid breathing smoke and vapors. In a confined
area, use full fire fighting equipment including an approved self-contained breathing apparatus. Cool
fire exposed containers with water.
Unusual Fire and Explosion Hazards: None
02/07/02 4:52 Page 1 of 4 ECS105-2AB.doc
Material Safety Data Sheet
Product: ECS 105-2, A & B
Section 4: Health Hazard Information
Threshhold Limit value (TLV): Not established
ANSI Hazard Class: A: 4 B: 4
Signs and Symptoms of exposure:
Type of Exposure Comp
Acute Overexposure A Moderately irritating to skin and eyes. Possible skin sensitizer.
B Vapors are irritating to skin and eyes
Chronic Overexposure A Pre-existing skin and eye disorders may be aggravated
B Unknown
Routes of Exposure
Inhalation A Not likely to produce adverse effects due to low volatility
B Vapors are irritating to the skin and eyes
Ingestion A Low order of toxicity
B Moderate toxicity; may cause burns of mouth and throat
Skin Absorption A Not likely to be absorbed through the skin in toxic amounts
B Repeated or prolonged exposure may be harmful
Skin Contact A Moderately irritating; may cause skin sensitization
B May cause chemical burns and/ or develop allergic reaction
Eye Contact A Moderately irritating
B Moderately irritating; permanent damage possible on prolonged
exposure
Carcinogenicity
NTP A No
B No
IARC A No
B No
OSHA A No
B No
Section 5: Emergency and First Aid Procedures
Skin: Remove contaminated clothing. Wash from skin with soap and water. Launder
clothing prior to re-use.
Eyes: Flush with water for 15 minutes while holding the eyelids open. Get medical attention
Inhalation: Remove victim to fresh air. Administer oxygen if necessary.
Ingestion: Do not induce vomiting. Give large doses of water. Get medical attention.
02/07/02 4:52 Page 2 of 4 ECS105-2AB.doc
Material Safety Data Sheet
Product: ECS 105-2, A & B
Section 6: Reactivity Data
Stability: Stable: X Unstable:
Conditions to Avoid: Elevated temperatures
Incompatibility (materials to avoid): Strong oxidizing agents, strong acids and bases
Hazardous Decomposition Products: Oxides of carbon and nitrogen
Hazardous Polymerization: May Occur: Will Not Occur: X
Conditions to Avoid: Large mixtures in bulk. Curing process is exothermic
Section 7: Spill and Leak Procedures:
Steps to be Taken if Material is Spilled or Released:
Avoid contact with liquid and vapors. Wipe with a cloth or collect on absorbent material. For large
spills, dike and contain. Pump or shovel into salvage containers.
Waste Disposal Method:
Cure, then bury or incinerate. Remove salvage containers to a waste disposal site operating in
compliance to federal, state and local regulations.
Section 8: Special Protection Information
Respiratory Protection (Specific Type):
For excessive vapors or to maintain below the TLV limit, NIOSH approved respirator in compliance to
29 CFR 1910.134.
Ventilation:: Local Exhaust: Yes
Mechanical: Yes
Other: As required
Protective Gloves:: Impervious rubber
Eye Protection: Splash proof chemical goggles
Other Protective Equipment: For prolonged exposure, impervious clothing and boots
to minimize personal contact. Eye wash station. Safety shower.
Section 9: SARA Title III Information
Section 302/304: Extremely Hazardous Substance
Component CAS # % RO (lbs) TPO (lbs)
Phenol 108-95-2 <2 500 10,000
CERCLA Section 102 (a): Hazardous Substance
Component CAS # % RO (lbs)
Phenol 108-95-2 <2 1000
02/07/02 4:52 Page 3 of 4 ECS105-2AB.doc
Material Safety Data Sheet
Product: ECS 105-2, A & B
Section 9: SARA Title III Information (continued):
Section 311: Hazardous Categorization
Acute Chronic Fire Pressure Reactive Non-Applicable
X X
Section 313: Toxic Chemicals
Component CAS # %
Phenol 108-95-2 <2
Section 10: Special Precautions For Industrial Use only!
Warning Statements: A: .May cause skin irritation; avoid contact with eyes.
B: Corrosive. May cause severe eye burns.
Precautions to be taken in Handling and Storage:
A: Store in a cool, dry area in tightly closed containers. Avoid contact with skin and eyes. Use with
adequate ventilation. Use good hygiene practices.
Other Precautions:
RCRA Status: Not considered to be a hazardous waste
CERCLA: Not listed
DOT Class: A: Not regulated
B: Corrosive Liquid, Basic, Organic, N.O.S.,UN 3267
Section 11: Miscellaneous
HMIS Rating
A B
Health: 2 3
Flammability: 1 1
Reactivity: 0 0
This Material Safety Data Sheet (MSDS) has been prepared in compliance with the federal OSHA
Hazard Communication Standard 29 CFR 1919,1200. The information contained herein is based on
data available to us and is believed to be accurate. However, the Company makes no warranty
expressed or implied concerning the accuracy of the information contained herein. It is the user鈥檚
responsibility to determine the safety, toxicity and suitability of the product described herein. All
materials may present unknown health hazards and should be used with caution. Although certain
hazards are described herein, we cannot guarantee these are the only hazards that exist.
Original Date: 4/21/00 Revision Date: Revision Number:
02/07/02 4:52 Page 4 of 4 ECS105-2AB.doc
|