Page 1 of 4
SAFETY DATA SHEET
Date Issued: 08/04/2006
MSDS No: 55-001.2
Date-Revised: 02/13/2007
Revision No: 1
PermaFlo
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME: PermaFlo
PRODUCT DESCRIPTION: Light Cure Luting and Flowable Composite
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (NORTH AMERICA) :(800) 424 - 9300
Ultradent Products, Inc.
(INTERNATIONAL) :(703) 527 - 3887
505 W. 10200 S.
South Jordan UT 84095
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS EINECS Classification Content
Bis GMA 001565-94-2 216-367-7 Xi; R36/37/38 8.5
Triethylene Glycol Dimethacrylate 109-16-0 203-652-6 Xi; R36/37/38 20
Sodium Monofluorophosphate 10163-15-2 233-433-0 Xn; R22, R38, R41 0.3
( Full text of R-Phrases can be found under heading 16 )
3. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"Xi" - Irritant
R36/38: Irritating to eyes and skin.
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS: No adverse human effects
POTENTIAL HEALTH EFFECTS
EYES: R36: Irritating to eyes.
SKIN: R38: Irritating to skin.
INGESTION: Harmful if swallowed.
INHALATION: Low hazard for usual industrial or commercial handling.
4. FIRST AID MEASURES
EYES: Flush eye with water for 15 minutes. Get medical attention.
SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
INGESTION: If swallowed, do NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control
center immediately. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek
immediate medical attention.
Page 2 of 4
SAFETY DATA SHEET
Date Issued: 08/04/2006
MSDS No: 55-001.2
Date-Revised: 02/13/2007
Revision No: 1
PermaFlo
5. FIRE FIGHTING MEASURES
FIRE FIGHTING PROCEDURES: As in any fire, wear self-contained breathing apparatus pressure-demand, (MSHA/NIOSH
approved or equivalent) and full protective gear.
FIRE FIGHTING EQUIPMENT:
Water spray, fog, or mist, foam, dry chemical, carbon dioxide (CO 2)
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Clean up spills immediately, observing precautions in Protective Equipment section.
COMMENTS: Refer particularly to local circumstances and regulations.
7. HANDLING AND STORAGE
STORAGE: Keep refrigerated.
STORAGE TEMPERATURE: 3掳C Minimum to 7掳C Maximum
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields (or goggles) and a face shield.
SKIN: S36/37: Wear suitable protective clothing and gloves.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Viscous substance
ODOR: Acrylic
COLOR: Shade dependent.
PHYSICAL STATE COMMENTS: Insoluble in water; partially soluble in organic solvents
10. STABILITY AND REACTIVITY
STABILITY: Stable when stored and handled under recommended conditions.
POLYMERIZATION: Polymerization occurs when exposed to visible light, ultraviolet light or extreme heat.
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: May be mildly irritating to eyes.
SKIN EFFECTS: Mildly to moderately irritating.
Page 3 of 4
SAFETY DATA SHEET
Date Issued: 08/04/2006
MSDS No: 55-001.2
Date-Revised: 02/13/2007
Revision No: 1
PermaFlo
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: No data available. Contact Env. Dept.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose of in compliance with governmental regulation (EC 1975L0442-20/11/2003)
14. TRANSPORT INFORMATION
ROAD AND RAIL (ADR/RID)
HAZARD CLASS: 9
PACKING GROUP: III
AIR (ICAO/IATA)
PRIMARY HAZARD CLASS/DIVISION: 9
PACKING GROUP: III
VESSEL (IMO/IMDG)
PRIMARY HAZARD CLASS/DIVISION: 9
PACKING GROUP: III
15. REGULATORY INFORMATION
EUROPEAN COMMUNITY
EEC LABEL SYMBOL AND CLASSIFICATION
"Xi" - Irritant
R36/38: Irritating to eyes and skin.
16. OTHER INFORMATION
RELEVANT R-PHRASES:R36/37/38: Irritating to eyes, respiratory system and skin.
R22: Harmful if swallowed.
R38: Irritating to skin.
R41: Risk of serious damage to eyes.
PREPARED BY: Iris McCallister
REVISION SUMMARY: Revision #: 1 This MSDS replaces the January 08, 2007 MSDS. Any changes in information are as
follows: In Section 1 MSDS Number
MANUFACTURER DISCLAIMER: FOR DENTAL USE ONLY: Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturer's knowledge) believed to
be accurate; however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability
Page 4 of 4
SAFETY DATA SHEET
Date Issued: 08/04/2006
MSDS No: 55-001.2
Date-Revised: 02/13/2007
Revision No: 1
PermaFlo
of the recommendation and assumes no liability to any user thereof. Each user should review these recommendations in the
specific context of the intended use and determine whether they are appropriate.
|