Page 1 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
N1000-N2000 Cyan
Canon Ink Tank BCI-1201C
Product Name:
Distributor: Canon Australia Pty Ltd
7338A
Product Code:
1 Thomas Holt Drive,
Company Name: Canon Inc.
North Ryde NSW 2113
30-2, Shimomaruko 3-Chome, Ohta-ku, Tokyo 146-8501, Japan
Address:
Ph: 02 9805 2000
Use of the Product: Ink for Ink Jet Printer
SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS
< Ingredient(s) >
CAS # / Weight EU Symbol/ USA
Chemical Name / ACGIH TLV EU ILV DFG MAK
EC # % R-Phrase OSHA PEL
Generic name
Copper, 90295-11-7 / 2-6 Xi/ R36 Not established Not established Not established Copper and its
[29H,31H-phthalocyaninato(2-)-
291-001-7 compounds
N29,N30,N31,N32]-,
Inhalable fraction
aminosulfonyl sulfo derivs.,
1.0 mg/m3
sodium salts
Isopropyl alcohol 67-63-0 / 1-3 F/ R11, TWA = 400 ppm, TWA = 400 ppm, Not established 200 ppm,
980 mg/m3 983 mg/m3 500 mg/m3
200-661-7 Xi/ R36,
R67 STEL = 500 ppm,
1230 mg/m3
Poly(oxy-1,2-ethanediyl), 9014-85-1 / 1-3 Xi/ R41 Not established Not established Not established Not established
.alpha.,.alpha.'-[1,4-dimethyl-1,4- Not applicable
bis(2-methylpropyl)-2-butyne-1,4
-diyl]bis[.omega.-hydroxy-
Glycol Confidential 5 - 10 None/ None Not established Not established Not established Not established
Ammonia derivative Confidential 5 - 10 None/ None Not established Not established Not established Not established
Lactam Confidential 5 - 10 None/ None Not established Not established Not established Not established
Water 7732-18-5 / 55 - 75 None/ None Not established Not established Not established Not established
231-79-12
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 2 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
< Carcinogen >
Chemical Name CAS # Reference
None
SECTION 3 HAZARDS IDENTIFICATION
EU Classification:
Not classified as dangerous
Emergency Overview:
Ink tank containing cyan liquid ink with slight odor.
Potential Health Effects and Symptoms:
Inhalation:
No adverse effects are expected under intended use.
Over exposure to isopropyl alcohol may cause headache, nausea, dizziness, vomiting, drowsiness, sore throat and
cough.
Ingestion:
Ingestion of isopropyl alcohol may cause headache, nausea, dizziness, vomiting, drowsiness, sore throat,
abdominal pain and dullness.
Eye:
May cause minimal irritation based on the animal test data of this ink. (See SECTION 11)
Skin:
May be no irritation and no sensitization based on the animal test data of this ink. (See SECTION 11)
Chronic Effects:
Not identified
Medical Conditions Generally known to be Aggravated by Exposure:
Not identified
SECTION 4 FIRST AID MEASURES
First Aid Measures:
Inhalation:
If symptoms are experienced, move victim to fresh air and obtain medical advice.
Ingestion:
Rinse mouth. Give one or two glasses of water.
If irritation or discomfort occurs, obtain medical advice immediately.
Eye:
Immediately flush with water for 5 minutes or until the chemical is removed.
If irritation persists, obtain medical advice immediately.
Skin:
Wash with water and soap or mild detergent.
If irritation persists, obtain medical advice.
Note to Physicians:
None
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 3 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
SECTION 5 FIRE FIGHTING MEASURES
Fire Fighting Measures:
Extinguishing Media:
CO2, water, foam or dry chemicals.
Unsuitable Extinguishing Media:
None
Special Fire Fighting Procedures:
None
Unusual Fire and Explosion Hazards:
None
Fire and Explosive Properties (See also Section 9):
Hazardous Combustion Products:
CO, CO2 and NOx.
Other Properties:
None
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Avoid breathing vapor.
Avoid contact with skin, eyes and clothing.
Environmental Precautions:
Do not release to sewer, surface water or ground water.
Method for Cleaning Up:
Wipe off with wet cloth or paper.
SECTION 7 HANDLING AND STORAGE
Handling:
Avoid breathing vapor.
Use with adequate ventilation.
Avoid contact with skin, eyes and clothing. When contact, wash out immediately.
Storage:
Keep away from heat and flame. Keep in a cool and dry place.
Protect from sunlight. Keep out of the reach of children.
Specific Uses:
Ink for Ink Jet Printer.
For more information, please refer to the instruction of this product.
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines:
Not established for this ink. (Also refer to SECTION 2)
Engineering Controls:
Use adequate ventilation.
Personal Protection Equipment(s):
Respiratory Protection: Required
Not Required
Eye/Face Protection: Required
Not Required
Skin Protection: Required
Not Required
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 4 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Cyan liquid
Appearance:
Slight odor
Odor:
7.0 - 8.0
pH:
Not available
Boiling Point/Range(掳C):
Not available
Melting Point/Range(掳C):
Not available
Decomposition Temperature(掳C):
63.2 (Tag. closed cup. Do not sustain combustion.)
Flash Point(掳C):
Not available
Flammable (Explosive) Limits:
Not available
Autoignition Temperature(掳C):
Classified as "Combustible liquid" under OSHA-HCS(USA).
Flammability:
Not Classified as "flammable" or "combustible" under FHSA(USA).
Not Classified as "flammable" under 1999/45/EC.
None
Explosive Properties:
None
Oxidizing Properties:
Vapor Pressure : Not available
Vapor Density : Not available
Density / Specific Gravity: 1.06
Water Solubility : Miscible
Fat Solubility : Not available
Partition Coefficient (n-Octanol/Water): Not available
Percent Volatile (%): 55 - 75
Evaporation Rate: Not available
2.3 - 2.9
Viscosity (mPa s):
SECTION 10 STABILITY AND REACTIVITY
Stable
Stability:
Unstable
None
Conditions to Avoid:
Acids, bases, oxidizing materials and reducing agents.
Materials to Avoid:
CO, CO2, NOx and Ammonia.
Hazardous Decomposition Products:
May Occur
Hazardous Polymerization:
Will Not Occur
Conditions to Avoid: None
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 5 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
SECTION 11 TOXICOLOGICAL INFORMATION
Acute Toxicity:
Inhalation:
Not available
Ingestion:
Estimated LD50 > 2500 mg/kg, 0/6 mortality at 2000 mg/kg (rat)
OECD Guidelines No.423 (1996)
96/54/EC Method B1 tris
Eye:
Minimal irritant, Maximum Group Mean Score = 7.0 Class 3 (rabbit)
OECD Guidelines No.405 (1987)
92/69/EEC Method B5
Skin:
Non irritant, Primary Irritation Index = 0.0 (rabbit)
OECD Guidelines No.404 (1992)
92/69/EEC Method B4
Sensitization:
Non sensitizer, Sensitization rate = 0% (0/10) (guinea pig)
OECD Guidelines No.406 (1992)
96/54/EC Method B6
Mutagenicity:
Ames test : Negative (test strains: S.typhimurium & E.Coli)
Reproductive Toxicity:
Not available
Carcinogenicity:
No component of this ink is listed as human carcinogens or potential carcinogens in IARC Monographs, NTP,
OSHA(USA) regulations or Annex I to Directive 67/548/EEC(EU).
Others:
None
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 6 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
SECTION 12 ECOLOGICAL INFORMATION
Not available
Mobility:
Not available
Persistence / Degradability:
Not available
Bioaccumulation:
Ecotoxicity: Not available
Other Adverse Effects: Not available
SECTION 13 DISPOSAL CONSIDERATION
Method of Disposal:
Disposal may be subject to federal, state and local laws.
SECTION 14 TRANSPORT INFORMATION
None
UN #:
UN Shipping Name: None
None
UN Classification:
UN Packing Group: None
Yes
Marine Pollutant: Chemical name (wt%):
No
Special Precautions: None
SECTION 15 REGULATORY INFORMATION
< EU Information >
Information on the Label:
Symbol & Indication: Not required
R-Phrase:
Not required
S-Phrase:
Not required
Dangerous Component(s):
None
Special Precautions under 1999/45/EC Annex V:
Safety data sheet available for professional user on request.
Specific Provisions in Relation to Protection of Man or the Environment:
Not regulated
76/769/EEC:
(EC)2037/2000: Not regulated
Not regulated
(EEC)2455/92:
None
Others:
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 7 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
< USA Information >
Information on the Label under FHSA:
Signal Word: Not required
Hazard warning:
Not required
Safety Advice:
Not required
Hazardous Component(s):
None
SARA Title III 搂313:
Weight %
Chemical Name
Copper, [29H,31H-phthalocyaninato(2-)-N29,N30,N31,N32]-, aminosulfonyl sulfo derivs., 2-6
sodium salts (90295-11-7)
(as Cu) (< 0.35)
California Proposition 65:
Weight %
Chemical Name
None
< Canada Information >
WHMIS Controlled Product: Not applicable (Manufactured article)
< Australia Information >
Statement of Hazardous Nature: Not classified as hazardous according to criteria of NOHSC
SECTION 16 OTHER INFORMATION
R11 : Highly flammable.
R36 : Irritating to eyes.
R41 : Risk of serious damage to eyes.
R67 : Vapours may cause drowsiness and dizziness.
Entirely revised
Date of Issue: September 6, 2001 Revised: May 17, 2002
Page 8 of 8
MSDS #: IC1014-0101
MATERIAL SAFETY DATA SHEET Product Code: 7338A
Literature Reference:
- U.S. Department of Labor, 29CFR Part 1910
- U.S. Environmental Protection Agency, 40CFR Part 372
- U.S. Consumer Product Safety Commission, 16CFR Part 1500
- ACGIH, Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices
- U.S. Department of Health and Human Services National Toxicology Program, Annual Report on Carcinogens
- World Health Organization International Agency for Research on Cancer, IARC Monographs on the Evaluation on the Carcinogenic Risk of
Chemicals to Humans
- DFG, List of MAK and BAT Values
- EU Directive 76/769/EEC, 67/548/EEC, 1999/45/EC
- EU Regulation (EC)2037/2000, (EEC)2455/92
- Canada Workplace Hazardous Materials Information System
- Australia National Occupational Health and Safety Commission's Approved Criteria for Classifying Hazardous Substances [NOHSC:1008]
Abbreviations:
EU: European Union.
OSHA PEL: PEL(Permissible Exposure Limit) under Occupational Safety and Health Administration.
ACGIH TLV: TLV(Threshold Limit Value) under American Conference of Governmental Industrial Hygienists.
EU ILV: Indicative Limit Values for Occupational Exposure under EU Directive 91/322/EEC and 2000/39/EC.
DFG MAK: MAK(Maximale Arbeitsplatzkonzentrationen) under Deutsche Forschungsgemeinschaft.
TWA: Time Weighted Average.
IARC: International Agency for Research on Cancer.
NTP: National Toxicology Program (USA).
OSHA HCS: Occupational Safety and Health Act, Hazard Communication Standard.
FHSA: Federal Hazardous Substances Act.
WHMIS: Workplace Hazardous Materials Information System.
NOHSC: National Occupational Health and Safety Commission.
The information, data and recommendations set forth herein (the "Information") are presented in good faith and are believed to be correct as of the
date hereof. The company/manufacturer makes no representations as to the completeness or accuracy of the Information and disclaims
responsibility for any reliance thereon. The Information is provided upon the condition that the persons receiving same will make their own
determination as to its suitability for their purposes prior to use. Any use of the Information must be determined by the user to be in accordance
with applicable Federal, state and local laws and regulations. In no event will the company/manufacturer be responsible for damages of any
nature whatsoever resulting from the use or reliance upon the Information.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO THE INFORMATION OR THE PRODUCT
TO WHICH THE INFORMATION REFERS.
Date of Issue: September 6, 2001 Revised: May 17, 2002
|