Material Safety
Data Sheet
95 Goodwin Street, East Hartford, CT., 06108 (860) 528-9838 Date Prepared 8/1/2006
HAZARD RATING 2
Health
SECTION I - IDENTIFICATION 0 = Least 1
Flammability
1 = Slight
Poly-Fill UJF Hardener 1
2 = Moderate
IDENTITY (As Used on Label) Reactivity
3 = High
C
4 = Extreme
Polyurea Joint Sealant
COMMON NAME Personal Protection
SECTION II - PRODUCT COMPONENTS CAS.# OSHA PEL ACGIH TLV
N.E.1
Diphenylmethane Diisocyanate 101-68-8 2 ppm
Propylene Carbonate 108-32-7 N.E. N.E.
1
None Established.
T.S.C.A. Status - O.K. on all above components.
*FOR SPILL, LEAK, FIRE, OR ACCIDENT, CALL CHEMTREC 24-HOUR EMERGENCY NUMBER 1-800-424-9300*
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point Specific Gravity (H2O = 1)
N/A 1.15
Vapor Pressure (mm Hg) Melting Point
N/A N/A
Vapor Density (AIR = 1) Evaporation rate (Butyl Acetate = 1)
N/A <1
Solubility in Water Insoluble
Appearance and Odor Pale Yellow to Amber
SECTION IV - FIRE and EXPLOSION HAZARD DATA
Flash Point (Closed Cup Method) Flammable Limits LEL UEL
>200 F N.A. N.A.
Extinguishing Media Foam, Carbon Dioxide, Dry Chemical, Water Fog
Special Firefighting Procedures
Wear full protective equipment including self-contained breathing apparatus. Irritating and/or toxic gases
may be generated by fire.
Unusual Fire and Explosion Hazards
Cool storage containers with water spray to prevent pressure build-up that may rupture the containers.
SECTION V - REACTIVITY DATA
Conditions to Avoid
Stability Unstable
Stable X Avoid excessive heat, open flame, sparks and strong oxidizing agents.
Incompatibility (Materials to Avoid) Water, acid, base, alcohols, mateal compounds
Hazardous Decomposition or Byproducts Isocyanate vapors or mist, carbon dioxide, carbon monoxide, nitrogen oxides
Conditions to Avoid
May Occur
Hazardous
Polymerization Will Not Occur
X Strong bases, water or temperatures over 160 C
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Skin? Ingestion?
YES YES YES
Nausea or respiratory tract irritation or light skin irritation.
Signs and Symptoms of Exposure
Health Hazards (Acute and Chronic)
ACUTE - No information is available on this product, no significant effects are expected.
CHRONIC - If misted or at high concentration, may cause pallor, nausea, anesthetic or narcotic affects.
Note: Persons with lung disorders or who are sensitized should not use this product.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
NO NO NO
Medical Conditions Generally Aggravated by Exposure
Allergy, skin disorders.
Emergency and First Aid Procedures
EYES - Flush with water, holding lids open for 15 minutes or more. Call physician for advice if necessary.
SKIN - PROMPTLY wash with soap and water. DO NOT wash with solvents. Seek medical advice if
irritation develops or persists.
INHALATION - Move person to fresh air if effects occur. If needed, give oxygen or artificial respiration
to improve breathing . Consult physician.
INGESTION - Get medical attention immediately. Never give liquids to an unconscious or convulsing person.
SECTION VII - CONTROL MEASURES
Respiratory Protection (Specify Type)
Provide adequate exhaust ventilation; use a NIOSH approved respirator if PELS/TLVS are exceeded.
Ventilation Local Exhaust Special
If needed. None known.
Mechanical Adequate exhaust ventilation must exhaust AWAY from applicator.
Protective Gloves Eye Protection
Natural rubber or Neoprene. Splash goggles or face shield.
Other Protective Clothing or Equipment
Use rubber apron, face shield and appropriate clothing to prevent contact with skin. Launder contaminated
clothing before reuse. Discard contaminated leather shoes and canvas sneakers. Protective skin creams help
cleaning with soap and water, gloves must still be worn. An eye wash station or an adequate supply of clean
water must be available at work area.
Work/Hygienic Practices Enforce careful handling to prevent splashing. Wash thoroughly after use.
SECTION VIII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be Taken in Case Material is Released or Spilled
Wear protective equipment to prevent exposure. Stop spill and dike to prevent spreading. Cover spill with
absorbent materials and collect into containers. Clean contaminated area with detergent and water or a steam
cleaner for best results.
Waste Disposal Method
Dispose in accordance with Federal, State and Local requirements.
Precautions to be Taken in Handling and Storing
Keep containers tightly closed when not in use.
Other Precautions NONE KNOWN.
Bryan Ruck, Chemist
Prepared by
"The above information is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to
PLEASE change and the conditions of handling and use, or misuse, are beyond our control, Dur-A-Flex, Inc. MAKES NO WARRANTY, EITHER EXPRES
NOTE OR IMPLIED, WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN AND
DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON. User should satisfy himself that he has all current data relevant to his particula
use."
Material Safety
Data Sheet
95 Goodwin Street, East Hartford, CT., 06108 (860) 528-9838 Date Prepared 8/1/2006
HAZARD RATING 3
Health
SECTION I - IDENTIFICATION 0 = Least 1
Flammability
1 = Slight
Poly-Fill UJF Resin 0
2 = Moderate
IDENTITY (As Used on Label) Reactivity
3 = High
C
4 = Extreme
Polyurea Joint Sealant
COMMON NAME Personal Protection
SECTION II - PRODUCT COMPONENTS CAS.# OSHA PEL ACGIH TLV
1
Polyoxyalkyleneamine 9046-10-0 N.E. N.E.
N,N-Dialkyamino-diphenylmethane 5285-60-9 N.E. N.E.
Propylene Carbonate 108-32-7 N.E. N.E.
gamma-Glycidoxypropyltrimethylsiloxane 2530-83-8 N.E. N.E.
Pigment Dispersion N/A N.E. 10 mg/m3
Alkali-aluminosilicate N/A 10 mg/m3 6 mg/m3
Castor oil 8001-79-4 N.E. N.E.
1
None Established.
T.S.C.A. Status - O.K. on all above components.
*FOR SPILL, LEAK, FIRE, OR ACCIDENT, CALL CHEMTREC 24-HOUR EMERGENCY NUMBER 1-800-424-9300*
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point Specific Gravity (H2O = 1)
395 F 1.05
Vapor Pressure (mm Hg) Melting Point
N/A N/A
Vapor Density (AIR = 1) Evaporation rate (Butyl Acetate = 1)
N/A <1
Solubility in Water 1-10%
Appearance and Odor Gray or color of pigment dispersion with a light ammonia odor
SECTION IV - FIRE and EXPLOSION HAZARD DATA
Flash Point (Closed Cup Method) Flammable Limits LEL UEL
>200 F N.A. N.A.
Extinguishing Media Foam, Carbon Dioxide, Dry Chemical, Water Fog
Special Firefighting Procedures
Wear full protective equipment including self-contained breathing apparatus. Irritating and/or toxic gases
may be generated by fire.
Unusual Fire and Explosion Hazards
Cool storage containers with water spray to prevent pressure build-up that may rupture the containers.
SECTION V - REACTIVITY DATA
Conditions to Avoid
Stability Unstable
Stable X Avoid excessive heat, open flame, sparks and strong oxidizing agents.
Incompatibility (Materials to Avoid) Strong oxidizers, acids
Hazardous Decomposition or Byproducts Carbon dioxide, carbon monoxide, nitrogen oxides
Conditions to Avoid
May Occur
Hazardous
Polymerization Will Not Occur
X Strong bases, water or temperatures over 160 C
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Skin? Ingestion?
YES YES YES
Nausea or respiratory tract irritation or light skin irritation.
Signs and Symptoms of Exposure
Health Hazards (Acute and Chronic)
ACUTE - buring of mouth, throat, and stomach pain. Inhalation can cause nasal discharge and pain in eyes.
CHRONIC - If misted or at high concentration, may cause pallor, nausea, anesthetic or narcotic affects.
Note: Persons with lung disorders or who are sensitized should not use this product.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
NO NO NO
Medical Conditions Generally Aggravated by Exposure
Allergy, skin disorders.
Emergency and First Aid Procedures
EYES - Flush with water, holding lids open for 15 minutes or more. Call physician for advice if necessary.
SKIN - PROMPTLY wash with soap and water. DO NOT wash with solvents. Seek medical advice if
irritation develops or persists.
INHALATION - Move person to fresh air if effects occur. If needed, give oxygen or artificial respiration
to improve breathing . Consult physician.
INGESTION - Get medical attention immediately. Never give liquids to an unconscious or convulsing person.
SECTION VII - CONTROL MEASURES
Respiratory Protection (Specify Type)
Provide adequate exhaust ventilation; use a NIOSH approved respirator if PELS/TLVS are exceeded.
Ventilation Local Exhaust Special
If needed. None known.
Mechanical Adequate exhaust ventilation must exhaust AWAY from applicator.
Protective Gloves Eye Protection
Natural rubber or Neoprene. Splash goggles or face shield.
Other Protective Clothing or Equipment
Use rubber apron, face shield and appropriate clothing to prevent contact with skin. Launder contaminated
clothing before reuse. Discard contaminated leather shoes and canvas sneakers. Protective skin creams help
cleaning with soap and water, gloves must still be worn. An eye wash station or an adequate supply of clean
water must be available at work area.
Work/Hygienic Practices Enforce careful handling to prevent splashing. Wash thoroughly after use.
SECTION VIII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be Taken in Case Material is Released or Spilled
Wear protective equipment to prevent exposure. Stop spill and dike to prevent spreading. Cover spill with
absorbent materials and collect into containers. Clean contaminated area with detergent and water or a steam
cleaner for best results.
Waste Disposal Method
Dispose in accordance with Federal, State and Local requirements.
Precautions to be Taken in Handling and Storing
Keep containers tightly closed when not in use.
Other Precautions NONE KNOWN.
Bryan Ruck, Chemist
Prepared by
"The above information is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to
PLEASE change and the conditions of handling and use, or misuse, are beyond our control, Dur-A-Flex, Inc. MAKES NO WARRANTY, EITHER EXPRES
NOTE OR IMPLIED, WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN AND
DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON. User should satisfy himself that he has all current data relevant to his particula
use."
|