O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
1. Product and Company Identification
Product Name: Flexible Foam Repair
Product Code: See Attachment
Application: flexible foam repair
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
77-58-7
DIBUTYLTIN DILAURATE 1-5 HAZCOM
WHMIS 1
280-57-9
TRIETHYLENEDIAMINE 1-5 WHMIS 1
3. Hazards Identification
WARNING
Health: This product may cause irritation to the respiratory system and skin.
Harmful if swallowed. Ingestion is not an expected route of entry in
industrial or commercial uses
Direct contact with eye causes severe irritation.
This product may be harmful if it is absorbed through the skin.
This product may cause sensitization by skin contact.
Overexposure may cause liver and kidney damage.
Physical and Chemical Hazards: This product is combustible at high temperatures.
4. First-Aid Measures
Inhalation: If gas/fume/vapor/dust/mist from the material is inhaled, remove the
affected person immediately to fresh air.
If irritation persists, get medical attention.
Skin Contact: Wash skin with soap and water.
If irritation persists, get medical attention.
Eye Contact: In case of contact with eyes, rinse immediately with plenty of water for
at least 15 minutes and seek medical attention.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 6 Official Record
Application: MATS
O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
Ingestion: Do not give anything by mouth to an unconscious or convulsing person.
If the material is swallowed, do not induce vomiting. Get immediate
medical attention or advice -- give several glasses of water or milk.
Most Important Symptoms Effects: Headache, dizziness, nausea, and loss of coordination are indications
of excessive exposure to vapors or spray mists.
Notes to a Physician: If the affected person's breathing is difficult, give oxygen.
5. Fire-Fighting Measures
Extinguishing Media: Dry chemical, foam, carbon dioxide, water fog.
Specific Methods: Water may be used to cool exposed containers to prevent pressure
build-up and explosion when exposed to extreme heat.
Specific Hazards: Due to pressure buildup, closed containers exposed to excess heat
may explode.
Protection of Firefighters: Fire fighters should be equipped with NIOSH-approved, self-contained
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Personal Precautions: Avoid inhalation of vapors and contact with skin and eyes.
Environmental Precautions: No available information.
Methods for Cleaning Up: Absorb the spilled material with an inert absorbent (nonflammable)
material.
7. Handling and Storage
Handling:
Technical Measures: No special precautions necessary.
Precautions and Advice for Safe Avoid breathing vapor or mist.
Handling: Avoid skin and eye contact.
Use this product with adequate ventilation.
Storage: Technical Measures: Do not reuse the empty container.
Storage Conditions: Keep the container tightly closed and in a cool, well-ventilated place.
8. Exposure Controls/Personal Protection
Engineering Measures: Use adequate mechanical ventilation (general and/or local exhaust)
ventilation to maintain exposure below PEL(s) and/or TLV(s).
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 6 Official Record
Application: MATS
O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
Use of impervious gloves is recommended, such as neoprene.
Hand Protection:
Wear chemical goggles.
Eye Protection:
Wash thoroughly after handling.
Skin and Body Protection:
Hygiene Measures: Wash contaminated clothing before reuse.
When using this material, do not eat, drink or smoke.
9. Physical and Chemical Properties
1.04
Specific Gravity:
LIQUID
Physical State:
N.AV
Odor:
BLACK
Color:
N.AV
pH:
Temperature Range During which Changes
in Physical State Occur:
>100 掳C
Boiling Point:
93.89 掳C SETAFLASH
Flash Point:
N.AV
Auto-ignition Temperature:
Explosion Properties:
N.AV
UEL:
N.AV
LEL:
>1 (AIR = 1)
Vapor Density:
INSOLUBLE IN WATER
Solubility:
N.AV
Viscosity:
<1 (BuAc = 1)
Evaporation Rate:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 6 Official Record
Application: MATS
O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
This product can react with oxidizing materials.
Conditions and Materials to Avoid:
This product may react with strong acids.
This product may react with strong alkalies.
Carbon monoxide, carbon dioxide.
Hazardous Decomposition Products:
Decomposition of this product may yield oxides of nitrogen upon
decomposition.
Irritating and toxic gases or fumes may be released during a fire.
11. Toxicological Information
280-57-9 TRIETHYLENEDIAMINE
Oral, adult rat, LD50 = 1700 mg/kg
77-58-7 DIBUTYLTIN DILAURATE
Oral, adult rat, LD50 = 175 mg/kg
May cause allergic skin reaction.
Skin Contact:
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No available information.
Contaminated Packaging:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 6 Official Record
Application: MATS
O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
The components of this product are listed on the TSCA Inventory
This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, National Parts General
Office,MD74,29500 Plymouth Road, Livonia, MI 48150,USA.
Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 6 Official Record
Application: MATS
O
Material Safety Data Sheet
157793 Level: 1
FIR No.:
US-US-3 Release Date: 2006-09-15
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
TA-4 1.7 fl. oz. (50 mL) TA-7-A( Inactive )
Sheet Metal Bonding Kit
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 6 Official Record
Application: MATS
|