Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

2008-07-1
79-10-7
80-15-9
868-77-9
2530-85-0
57-55-6

File Name: fcsdchemicalsandlubricants_com---us165960us.asp
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
1. Product and Company Identification
Rear View Mirror Adhesive
Product Name:
See Attachment
Product Code:
Rear view mirror adhesive
Application:
Ford Motor Company
Supplier:
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Poison Control Center: 1-800-959-3673
Emergency Telephone:
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.



Chemical Name CAS Number Percent Hazard
Concentration Classification

ACRYLIC ACID 79-10-7 1-5 ACGIH/OSHA
CAA-HAP
HAZCOM
RQ
SARA 313
WHMIS 1
RSMS_D_ALL
PEL/TLV-US
CUMENE HYDROPEROXIDE 80-15-9 1-5 RQ
SARA 313
WHMIS 1
RSMS_D_ALL
HYDROXYETHYL METHACRYLATE 868-77-9 1-5 RSMS_D_ALL
WHMIS 1
METHACRYLIC ACID, 3- 2530-85-0 1-5 WHMIS 1
(TRIMETHOXYSILYL)PROPYL
ESTER
1,2-PROPYLENE GLYCOL 57-55-6 0.1-1 WHMIS 1

3. Hazards Identification
This product may cause severe eye irritation.
Health:
This product may cause irritation to the respiratory system.
This product may be harmful if it is swallowed.
This product may cause irritation to the skin.
This product may cause an allergic skin reaction.
Overexposure may cause liver, kidney and heart damage.




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
Material contains a chemical which is a Hazardous Air Pollutant (HAP),
Environment:
regulated by the United States Clean Air Act.


4. First-Aid Measures
If gas/fume/vapor/dust/mist from the material is inhaled, remove the
Inhalation:
affected person immediately to fresh air.
If irritation persists, get medical attention.

Wash skin with soap and water.
Skin Contact:
If irritation persists, get medical attention.

In case of contact with eyes, rinse immediately with plenty of water for
Eye Contact:
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.

If the material is swallowed, get immediate medical attention or advice
Ingestion:
-- Do not induce vomiting.


5. Fire-Fighting Measures
Dry chemical, foam, carbon dioxide.
Extinguishing Media:

Irritating and toxic gases or fumes may be released during a fire.
Specific Hazards:

Fire fighters should be equipped with NIOSH-approved, self-contained
Protection of Firefighters:
breathing apparatus (SCBA) and full protective clothing.


6. Accidental Release Measures
Avoid inhalation of vapors and contact with skin and eyes.
Personal Precautions:
Provide adequate ventilation.
Wear appropriate protective equipment and clothing during clean-up.

No available information.
Environmental Precautions:

Absorb the spilled material with an inert absorbent (nonflammable)
Methods for Cleaning Up:
material.
Scrape up the spilled material and transfer to a suitable container for
disposal.


7. Handling and Storage
Handling:



No special precautions necessary.
Technical Measures:




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
Precautions and Advice for Safe Avoid prolonged or repeated breathing of this material.
Avoid prolonged or repeated skin contact with this material.
Handling:
Do not get this material in your eyes, on your skin, or on your clothing.
Use with adequate ventilation.

No special precautions necessary.
Storage: Technical Measures:

Storage temperatures should not exceed 40掳C (104掳F).
Storage Conditions:
Store in a cool, well-ventilated area away from incompatibles.


8. Exposure Controls/Personal Protection
Use general ventilation.
Engineering Measures:
Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.


Exposure Limits:
Chemical Name TWA References
2(ppm)
ACRYLIC ACID ACGIH


Personal Protective Equipment:

If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.

The use of neoprene gloves is recommended.
Hand Protection:
The use of nitrile-latex gloves is recommended.

Wear safety glasses with side shields.
Eye Protection:

Wash thoroughly after handling.
Hygiene Measures:
When using this material, do not eat, drink or smoke.




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
9. Physical and Chemical Properties
1.1 @20掳C
Specific Gravity:
LIQUID
Physical State:
IRRITATING
Odor:
YELLOW
Color:
N.AP
pH:

Temperature Range During which Changes
in Physical State Occur:
>150 掳C
Boiling Point:
>95 掳C COC
Flash Point:

Explosion Properties:

8%
UEL:
2%
LEL:
<5@24掳C mmHg
Vapor Pressure:
>1 (AIR=1)
Vapor Density:
INSOLUBLE IN WATER
Solubility:
N.AP
Viscosity:
ND
Evaporation Rate:

10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.

This product may react with oxidizing agents.
Conditions and Materials to Avoid:
This product may react with strong alkalies.

Irritating and/or toxic fumes may be emitted upon the product's
Hazardous Decomposition Products:
decomposition.




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
11. Toxicological Information
80-15-9 CUMENE HYDROPEROXIDE
Inhalation, adult rat, LC50 = 220 ppm (4 Hours)
79-10-7 ACRYLIC ACID
Inhalation, mouse, LC50 = 5300 mg/m3 (2 Hours)
57-55-6 1,2-PROPYLENE GLYCOL
Oral, adult rat, LD50 = 20 gm/kg
79-10-7 ACRYLIC ACID
Oral, adult rat, LD50 = 250 mg/kg
80-15-9 CUMENE HYDROPEROXIDE
Oral, adult rat, LD50 = 382 mg/kg
81-07-2 SACCHARIN
Oral, mouse, LD50 = 17 gm/kg
868-77-9 HYDROXYETHYL METHACRYLATE
Oral, mouse, LD50 = 5888 mg/kg
57-55-6 1,2-PROPYLENE GLYCOL
Skin, adult rabbit, LD50 = 20800 mg/kg
79-10-7 ACRYLIC ACID
Skin, adult rabbit, LD50 = 280 mg/kg
80-15-9 CUMENE HYDROPEROXIDE
Skin, adult rat, LD50 = 500 mg/kg



No definitive information available on carcinogenicity, mutagencity,
Chronic (Long Term) Toxicity:
target organs, or developmental toxicity


12. Ecological Information
No specific aquatic data available for this product.


13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.

No consideration given when disposed of according to local, state, and
Contaminated Packaging:
Federal regulations.




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.



Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
The components of this product are listed on the TSCA Inventory
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.




16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit


HMIS and NFPA Hazard Class Information:

Health: 2 (Moderate) Flammability: 1 (Slight) Physical Hazard: 0 (Least)
HMIS Hazard Class:

Health: 2 (Moderate) Flammability: 1 (Slight) Instability: 1 (Slight)
NFPA Hazard Class:

The following sections contain revisions OR 2
15
NEW statements.
16
8




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
The chemical identification and properties for this material were provided
Preparation Information:
by the manufacturer. For Canadian locations, a manufacture's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Diagnostic Service Center II, 1800
Fairlane Drive, Allen Park, MI 48101, USA.

The information on this data sheet represents our current data and is
Disclaimer:
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 8 Official Record
Application: MATS
O



Material Safety Data Sheet

165960 Level: 1
FIR No.:
US-US-5 Release Date: 2008-07-16
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
TA-17 0.01 fl. oz. (0.3 mL)




PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 8 Official Record
Application: MATS

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
engnet_anu_edu_au---alginic_acid.asp 9005-32-7
engnet_anu_edu_au---DDS.asp 80-08-0
envexp_com---Gd_10M18-1_A.asp 12064-62-9 7697-37-2 7732-18-5
envexp_com---Gd_10M18-2.asp 12064-62-9 7647-01-0 7732-18-5
envsg_com---deflect_sunscreen.asp 118-56-9 5466-77-3 118-60-5 131-57-7 7732-18-5 57-11-4 69331-39-1 36653-82-4 8002-31-1 8001-97-6 7695-91-2 102-71-6 8001-30-7 79-81-2 67-97-0 9003-01-4 68648-66-8
envsg_com---epi_extracare.asp 64-17-5 7732-18-5 17661-50-6 142-91-6 9003-01-4 102-71-6 112-92-5 8006-54-0 99-76-3 61789-91-1 8001-97-6 8006-95-9 94-13-3 124-68-5 88-04-0 97-59-6
envsg_com---sbs_protect.asp 7732-18-5 1332-58-7 67762-27-0 8012-95-1 8009-03-8 78491-02-8 35691-65-7 99-76-3 122-99-6 94-13-3 57-55-6 151-21-3 84012-44-2 1934-21-0
env_gov_nl_ca---MSDS_-_TKPP.asp 7320-34-5
epotek_com---301_msds.asp 025085-99-8 2425-79-8
epotek_com---509FM-1_msds.asp 025085-99-8 2425-79-8
epoxysystems_com---209MSDS.asp 25068-38-6 25154-52-6 106-89-8 68609-97-2
ercoworldwide_com---Chlorite_Sol_15-37.asp 7758-19-2 7732-18-5
ercoworldwide_com---Sodium_Chlorate_Recycle_Solution.asp 7775-09-9
esands_com---ARALDITE_KIT_K330_PART_A.asp 2425-79-8
espi-metals_com---aluminumiodide.asp N/A
espi-metals_com---aluminumsulfide.asp N/A
espi-metals_com---chloroauricacid.asp N/A
espi-metals_com---goldchloride.asp N/A
espi-metals_com---samariumnitrate.asp N/A
espi-metals_com---seleniumchloride.asp 10026-03-6
etigra_com---Ethephon_E-AG_2_Plant_Growth_Regulator_REV_0807.asp 16672-87-0
euclidchemical_com---052U_55_U.asp N/A
euclidchemical_com---TB5312205_U.asp N/A
evans_mse_berkeley_edu---msds-HYDROCHLORIC_ACID.asp 7647-01-0 7732-18-5
evidenttech_com---CdSe-ZnS-in-Toluene-Core-Shell-v2.asp 108-88-3 1306-24-7 1314-98-3
ewcs_com---623992.asp N/A
excelsiorhvac_com---344030.asp 14808-60-7
expotechusa_com---1612_16.asp 62625-22-3 107-21-1
expotechusa_com---240-05.asp 547-58-0 62625-32-5
expotechusa_com---241-00.asp 845-10-3
expotechusa_com---File_26427.asp 76-13-1
extranet_acsysweb_com---128333782677500000_Poly-Fill_UJF_MSDS.asp 101-68-8 108-32-7
ezmsds_com---12.asp 25852-47-5 9004-96-0 81-07-2 80-15-9 57-55-6 112945-52-5 613-48-9 13463-67-7
eznails_net---EZUVTopCoat.asp 108-88-3 25035-69-2 123-86-4 7128-64-5 81-48-1
eznails_net---ThatsItTopCoat.asp 110-19-0 9004-64-2 67-63-0 84-74-2 1330-20-7 81-48-1 119-61-9
fabchem_com---msds.starrBrite.asp 7631-90-5
fabritec_com---6734-ALEVELOL.asp 64742-88-7
face-body_com---MSDS_-_LIP_LINE_CORRECTOR_Coral_Casino.asp 7732-18-5 56-81-5 67-63-0 2379-74-0 15790-07-5 12225-21-7 13463-67-7 15876-57-0
fandeli_com---MSDS_S20.asp N/A
fch_vutbr_cz---anthranilova_kyselina.asp 118-92-3
fcj_co_jp---msds_fc104_aerosol.asp N/A
fcsdchemicalsandlubricants_com---us157793us.asp 2006-09-1 77-58-7 280-57-9
fcsdchemicalsandlubricants_com---us165960us.asp 2008-07-1 79-10-7 80-15-9 868-77-9 2530-85-0 57-55-6
fctwater_com---WT140D_MSDS.asp 128-04-1
fctwater_com---WT675D_MSDS.asp 16721-80-5 11138-49-1
fedlabs_biz---1041-InstantBlastCN.asp 7631-86-9 532-27-4
fefchemicals_com---Cetrimide_Solution_40_-_D_-_05.asp 2007-08-2 1119-97-7 1119-94-4
fefchemicals_com---FeF_12-25A_Diagnostic_-_DK_-_05.asp 2007-08-2 112-00-5
fefchemicals_com---FeF_12-25A_Diagnostic_-_D_-_05.asp 2007-08-2 112-00-5
fefchemicals_com---Strong_Cetrimide_Solution_40_BP_-_GB_-_03.asp 2004-06-2 1119-97-7 1119-94-4 67-63-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC