GFS CHEMICALS, INC.
P.O. Box 245 Powell, OH 43065
740-881-5501(Tel.) 740-881-5989(Fax)
1-800-424-9300(Chemtrec 24Hr. Info.)
MATERIAL SAFETY DATA SHEET
3010
BIS(TRIMETHYLSILYL)ACETYLENE
CHEMICAL NAME & SYNONYMS DOT CLASS SARA TITLE 313
Bis(trimethylsilyl)acetylene 3/II No
TSCA listed - Yes
FORMULA REPORTABLE QUANTITY F.W. CAS#
(CH 3) 3SiC/CSi(CH 3) 3 N/A 170.41 14630-40-1
PHYSICAL DATA
Boiling point 136-137掳C; Melting point 21掳C; Density 0.752.
APPEARANCE & ODOR
Clear, colorless liquid. Characteristic organic odor.
REACTIVITY & CONDITIONS TO AVOID
Stable. May decompose on exposure to moist air or water. Incompatible with acids, bases and
oxidizing agents.
FIRE HAZARDS
Flammable liquid, will emit toxic fumes of carbon monoxide, carbon dioxide and silicon dioxide.
Firefighters wear SCBA.
EXTINGUISHER FLASHPOINT LEL UEL
CO 2, ABC dry powder, foam, water spray or fog. 2掳C Not known
HEALTH HAZARDS
Considered mildly irritating to the eyes. The HEALTH RISKS of this product HAVE NOT BEEN FULLY
DETERMINED. Avoid contact with skin and eyes. Avoid breathing vapor. May be harmful if
swallowed, inhaled or absorbed through the skin. This product must only be used under conditions
of PRUDENT LABORATORY PRACTICE as described at 40 CFR 720.36.No LD/TD data found. OSHA PEL/ACGIH
TLV not established. This material is not a listed carcinogen. It DOES NOT indicate absence of
carcinogenicity.
FIRST AID
Remove contaminated clothing immediately and launder before reuse. Discard contaminated shoes.
For eyes, flush with plenty of water for at least fifteen minutes. Seek medical attention
immediately. For skin, wash thoroughly with soap and water, while removing clothing. Seek
medical attention if rash should occur. For inhalation, remove to fresh air. If not breathing
give mouth to mouth resuscitation. If breathing is difficult, give oxygen. Seek medical
attention at once.
SPECIAL PRECAUTIONS
Goggles, rubber gloves, protective clothing are required. Use only with adequate ventilation
and/or suitable respiratory protection. Avoid all contact.
SPILLS & LEAKS
Ventilate area. Equip personnel with SCBA and full protective clothing. Take up spill in
absorbent and dispose to incinerator or other suitable hazardous waste. Wash spill area
thoroughly with water after absorbent is picked up.
CATALOG # PREPARED BY DATE
3010 MDM July 20, 2004
|