Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

98-86-2
77-83-8
628-63-7
100-52-7
140-11-4
91-64-5
141-78-6
64742-96-7

File Name: monsterjanitorial_com---4772004.asp
MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 1451 Regular Deodorizing Urinal Screen - Red/Cherry (Fragrance Only)
SYNONYMS:
PRODUCT CODES:

MANUFACTURER: Impact Products, LLC
DIVISION:
ADDRESS: 2840 Centennial Road, Toledo, OH 43617

EMERGENCY PHONE: 800-535-5053
CHEMTREC PHONE:

CHEMICAL NAME:
CHEMICAL FAMILY:
CHEMICAL FORMULA:

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT: CAS NO. TLV/TWA PEL
Acetophenone 98-86-2 n/a n/a
Ethyl Methyl Phenyl Glycidate 77-83-8 n/a n/a
Amyl Acetate 628-63-7 100 ppm TWA 100 ppm TWA
Benzaldehyde 100-52-7 n/a n/a
Benzyl Acetate 140-11-4 15 ppm TWA n/a
Coumarin 91-64-5 n/a n/a
Ethyl Acetate 141-78-6 400 ppm TWA 400 ppm TWA
Petroleum Distillates 64742-96-7 n/a 500 ppm TWA

(The specific components of this product constitute a trade secret. Listed are components reported in tests with laboratory animals to
have hazardous properties other than combustilibty or flammability or eye and skin irritation from excessive contact. Both of these
hazards are addressed elsewhere on this data sheet. The relevancy of animal test data on these components to the mixture as a whole
or to humans has not been established. Note that these possible effects in test animals were reported for continual overexposure to
components of this mixture. Many of the substances having such effects are natural components of common foods and are not known
to be harmful in normal use).

HEALTH HAZARD DATA:
Acetophenone: Continual Overexposure: irritant vapor, possible narcotic effects
Ethyl Methyl Phenyl Glycidate: If swallowed: possible nerve damage, possible testicular atrophy
Amyl Acetate: Continual Overexposure: irritant vapor, possible narcotic or anesthetic effects
Benzaldehyde: If Swallowed: possible kidney damage; Continual Overexposure: irritant vapor, possible anesthetic effects
Benzyl Acetate: Continual Overexposure: irritant vapor possible anesthetic effects
Coumarin: If Swallowed: toxic, possible liver damage, possible reproductive effects
Ethyl Acetate: Continual Overexposure: irritant vapor
Petroleum Distillates: Continual Overexposure: irritant vapor
SECTION 3: HAZARDS IDENTIFICATION

ROUTES OF ENTRY: Eye, skin contact, inhalation

SIGNS/SYMPTOMS OF OVEREXPOSURE:
EYES: Can cause severe irritation, tearing and redness, blurred vision

SKIN: Prolonged or repeated contact can cause irritation, defatting or dryness of skin, dermatitis

INGESTION: Can cause serious health effects including nausea, vomiting, gastrointestinal irritation

INHALATION: Excessive inhalation of vapors can cause irritation of the respiratory tract, nausea, dizziness, or headache

ACUTE/CHRONIC HEALTH HAZARDS:

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known



CARCINOGENICITY
OSHA: No ACGIH: NTP: No IARC: No
CSCA STATUS: All ingredients of this product are on the ISCA inventory

PAGE 1 OF 3
MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01

SECTION 4: FIRST AID MEASURES

EYES: Flush with water for at least 15 minutes, get medical attention if necessary

SKIN: Wash thoroughly with soap and water. Remove contaminated clothing

INGESTION: Give water to dilute, get medical attention

INHALATION: If affected by vapors, get to fresh air. If breathing is difficult, see physician. Aspiration of substantial amounts of irritant
liquids into the lungs can be fatal - get immediate medical attention

SECTION 5: FIRE-FIGHTING MEASURES

FLAMMABLE LIMITS: n/e

FLASH POINT: 68.0

METHOD USED: TCC

HAZARD CLASSIFICATION: HEALTH: 2 FLAMMABILITY: 4 REACTIVITY: 0

EXTINGUISHING MEDIA: Carbon dioxide, foam, dry chemical

SPECIAL FIRE FIGHTING PROCEDURES: Class B fire procedures. Wear NIOSH approved respirator and full protective gear

UNUSUAL FIRE AND EXPLOSION HAZARDS: None known

HAZARDOUS DECOMPOSITION PRODUCTS:


SECTION 6: ACCIDENTAL RELEASE MEASURES

ACCIDENTAL RELEASE MEASURES:


SECTION 7: HANDLING AND STORAGE

HANDLING AND STORAGE: Handle as flammable or combustible liquid as appropriate. Avoid eye contact and prolonged contact with
the skin. Use adequate ventilation. Wash thoroughly after handling.

OTHER PRECAUTIONS:


SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

VENTILATION : Local exhaust is recommended, general mechanical ventilation is usually adequate

RESPIRATORY PROTECTION: None normally required with adequate ventilation
EYE PROTECTION: Safety glasses or goggles should be worn in all industrial operations
SKIN PROTECTION: Gloves, coveralls, aprons, boots as necessary to prevent skin contact
OTHER PROTECTIVE CLOTHING/EQUIPMENT:

WORK HYGIENIC PRACTICES:

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE/ODOR: Pale, yellow liquid with cherry characteristic

BOILING POINT: n/e

MELTING POINT: n/e

VAPOR PRESSURE (mmHg): n/e

VAPOR DENSITY (AIR = 1): Heavier than air


PAGE 2 OF 3
MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01
SPECIAL GRAVITY (H2O = 1): 0.944

EVAPORATION RATE: Slower than n-Butyl Acetate

SOLUBILITY IN WATER: Insoluble

PERCENT VOLATILE: n/e

VISCOSITY:

SECTION 10: STABILITY AND REACTIVITY

STABLE UNSTABLE
STABILITY: X

CONDITIONS TO AVOID (STABILITY):

INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizing agents

HAZARDOUS DECOMPOSITION: Carbon dioxide or carbon monoxide and smoke on combustion

HAZARDOUS POLYMERIZATION: Will not occur

CONDITIONS TO AVOID (POLYMERIZATION):


SECTION 11: TOXICOLOGICAL INFORMATION

TOXICOLOGICAL INFORMATION: This product contains the following toxic chemicals subject to the reporting requirements of
Section 313 of the Emergency Planning and Right To Know Act of 1986 and 40 CFR 372.

This information must be included in all MSDSs that are copied and distributed for this material.

Acetophenone CAS No.: 98-86-2 % by Wt.: 1.900
SECTION 12: ECOLOGICAL INFORMATION

ECOLOGICAL INFORMATION:


SECTION 13: DISPOSAL CONSIDERATIONS/PROCEDURES FOR SPILL OR LEAK CLEANUP

WASTE DISPOSAL METHOD: Soak up with absorbent material for incineration. Observe local, state, and federal regulations

PROCEDURE FOR SPILL OR LEAK CLEANUP: Remove ignition sources. Contain spill. Absorb with suitable chemical absorbents for
disposal

SECTION 14: TRANSPORT INFORMATION




SECTION 15: REGULATORY INFORMATION




SECTION 16: OTHER INFORMATION

OTHER INFORMATION:

DISCLAIMER: The information furnished herein is believed to be accurate and represents the best data currently available to us.
No warranty, expressed or implied is made and Impact Products assumes no legal responsibility or liability
resulting from its use.




PAGE 3 OF 3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
miraclesealants_com---s_seal_enhance_nonvoc.asp 64742-88-7
miracote_com---GLAZETOP_XT_III_COMP_A.asp 54914-37-3 2425-79-8 623-91-6 108-65-6
miracote_com---MVERS_II_Component_B_7255_10-25-07.asp 100-51-6 109-55-7 90-72-2
mnsu_edu---uni_ver-321.asp 497-19-8 14402-88-1 12125-02-9
mobilepropane_com---msds.asp 74-98-6 115-07-1 75-08-1
modernenvironmental_net---Oxine_MSDS.asp 7758-19-2 10049-04-4
molytec_com_au---MSDS_3660.asp 24448-20-2 3006-93-7 81-07-2 112945-52-5 80-15-9 27813-02-1 39382-25-7
monsterjanitorial_com---4772004.asp 98-86-2 77-83-8 628-63-7 100-52-7 140-11-4 91-64-5 141-78-6 64742-96-7
montereyagresources_com---ConditionXtra-0805-m.asp 7783-20-2 7664-38-2
montereyagresources_com---TechMaxGran-m.asp 10-27-6 10-38-2 10034-96-5
montereychemical_com---Moncide-m.asp 2163-80-6 124-65-2 75-60-5
montgomeryschoolsmd_org---Loctite_554.asp 25852-47-5 39382-25-7 80-15-9
mopbucketandwringer_com---2745097.asp 18472-51-0 106-47-8 56-55-1 67-63-0
mopbucketandwringer_com---3382080.asp 7732-18-5 151-21-3 68891-38-3 8051-30-7 61789-40-0 102-71-6 56-81-5 77-92-9 97-59-6 9016-45-9
mouldlife_co_uk---GB-EN-RENPIM_5216_POLYOL-164006700-MSDS.asp 105-59-9
mrcgene_com---msdsbcp.asp 109-70-6
mrdc_com---Copper_Nitrate_Soln._MSDS.asp 7732-18-5 23087-46-9
msds-1620.asp 147-85-3
msds-18037.asp 50-69-1
msds-19096.asp 3211-76-5 7757-93-9
msds-gsk_com---0021300b.asp 55011-47-0 44-20-8 103-90-2 125-69-9 345-78-8
msds-gsk_com---0022500a.asp 44-20-8 103-90-2 58-08-2
msds-gsk_com---0023420b.asp 44-20-8 103-90-2 41444-62-6 58-08-2
msds-gsk_com---0029150f.asp 55011-47-0 44-20-8 103-90-2 125-69-9 345-78-8 113-92-8
msds-gsk_com---0043490c.asp 44-20-8 103-90-2 61-76-7 50-81-7
msds-gsk_com---11056509.asp 44-20-8 20830-75-5
msds-gsk_com---1105690d.asp 44-20-8 55-98-1
msds-gsk_com---1105730c.asp 44-20-8 6112-76-1
msds-gsk_com---1105790a.asp 44-20-8 154-42-7
msds-gsk_com---12346704.asp 44-20-8 126-07-8
msds-gsk_com---12729505.asp 44-20-8 20830-75-5 64-17-5
msds-gsk_com---12746807.asp 44-20-8 67-97-0 59-02-9
msds-gsk_com---12773005.asp 44-20-8 8007-45-2 97-59-6 50-23-7
msds-gsk_com---12792505.asp 44-20-8 103-90-2 93-14-1 61-76-7
msds-gsk_com---12946804.asp 44-20-8 103-90-2 61-76-7
msds-gsk_com---12973801.asp 44-20-8 103-90-2 93-14-1 61-76-7 64-17-5
MSDS_2220-VF_US_11May07.asp 50-01-1 79-14-1 56-81-5 4998-76-9
MSDS_2222-VF_US_03Jul03.asp 107-41-5 57-13-6
MSDS_2331_US_16Aug06.asp 67-63-0 56-81-5 506-59-2 111-41-1 64-19-7 79-14-1 9036-19-5
MSDS_5744_UK_04Jun03.asp 13826-83-0 14075-53-7
MSDS_7210_US_15Mar05.asp 111-76-2 126-86-3
msds_anhrefractories_com---ISO-STAR_MX_USA.asp 1344-28-1 1309-48-4 9003-35-4 7782-42-5 7440-21-3 1333-86-4 4067-16-7
msds_anhrefractories_com---NARTAR_7_USA.asp 1309-48-4 68187-58-6 10124-37-5
msds_anhrefractories_com---PLASTECH_90P_STDUSA.asp 1344-28-1 14335-33-2 1302-78-9 13530-50-2 14808-60-7
msds_anhrefractories_com---UNACAST_30-90_TI_USA.asp 1309-48-4 68187-58-6 10361-03-2
msds_anhrefractories_com---UNACAST_HPU_TI.asp 1344-28-1 68187-58-6 12042-68-1 471-34-1 546-93-0
msds_anhrefractories_com---WO-6878_BATCH_USA.asp 1309-48-4 7782-42-5 7429-90-5 9003-35-4 7440-21-3 4067-16-7
msds_carboline_com---0481a1nl_2_usansi.asp 25036-25-3 540-88-5 108-88-3 25068-38-6 392662-40-7 71-36-3 75-65-0
msds_carboline_com---0497c1nl_2_usansi.asp 108-88-3 67-63-0 392662-40-7 100-51-6 9046-10-0 694-83-7 90-72-2 108-38-3 100-41-4
msds_carboline_com---8222s1nl_2_usansi.asp 014807-96-6 111-76-2 5131-66-8 78-92-2 88-12-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC