SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product information
Trade name : RENPIM 5216 POLYOL
Use : Polyol component for tooling systems
Company : Huntsman Advanced Materials (Europe)BVBA
Everslaan 45
3078 Everberg / Belgium
Telephone : +41619661599
Telefax : +41619661589
Emergency telephone : +41 61 966 40 00 (in France ORFILA : +33(0)145425959)
number
For further Product EHS related questions concerning this document or its contents, please
contact:
E-Mail: global_product_ehs_admat@huntsman.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
Modified polyol
preparation
Hazardous components
Chemical Name CAS-No. Symbol(s): R-phrase(s) Concentration [%]
2,2'-(methylimino)diethanol 105-59-9 Xi R36 1.00 - 5.00
EC-No.: 203-312-7
3. HAZARDS IDENTIFICATION
Not a hazardous substance or preparation according to EC-directives 67/548/EEC or 1999/45/EC.
4. FIRST AID MEASURES
Inhalation : Move to fresh air.
If symptoms persist, call a physician.
Eye contact : Rinse immediately with plenty of water for at least 15 minutes.
If eye irritation persists, consult a specialist.
Skin contact : Wash off with soap and plenty of water.
If skin irritation persists, call a physician.
Ingestion : Immediately give plenty of water (if possible charcoal slurry).
If a person vomits when lying on his back, place him in the
recovery position.
Oxygen or artificial respiration if needed.
Do not induce vomiting.
1/6
SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
5. FIRE-FIGHTING MEASURES
Suitable extinguishing : Water spray.
media Carbon dioxide (CO2).
Foam.
Dry powder.
Extinguishing media which : High volume water jet.
must not be used for safety
reasons
Special protective : Wear self-contained breathing apparatus and protective suit.
equipment for fire-fighters
Further information : Burning produces obnoxious and toxic fumes.
Carbon oxides.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Do not breathe vapours/dust.
Avoid contact with skin, eyes and clothing.
Ensure adequate ventilation.
Environmental precautions : Do not allow material to contaminate ground water system.
Methods for cleaning up : Soak up with inert absorbent material (e.g. sand, silica gel, acid
binder, universal binder, sawdust).
7. HANDLING AND STORAGE
Handling
Advice on safe handling : Provide sufficient air exchange and/or exhaust in work rooms.
Handle and open container with care.
Storage
Further information on : Keep away from food, drink and animal feeding stuffs.
storage conditions Keep container tightly closed.
Store at room temperature in the original container.
Storage hazard class : Storage class 12, Liquids, not dangerous
Huntsman Advanced
Materials
2/6
SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Components with workplace control parameters
Components CAS-No. Control Update Basis
parameters
Personal protective equipment
Respiratory protection : In case of insufficient ventilation wear suitable respiratory
equipment.
Filter type AX-P2 (organic vapours, particles)
Eye protection : Tightly fitting safety goggles.
Hand protection : Material of gloves for long term application (BTT>480 min):
Butyl rubber
Ethyl Vinyl Alcohol Laminate (EVAL)
Material of gloves for short term/splash application (10
min
Nitrile rubber
Use gloves approved to relevant standards e.g. EN 374
(Europe), F739 (US).
Suitability and durability of a glove is dependent on usage, e.g.
frequency and duration of contact, chemical resistance of glove
material and dexterity. Always seek advice from glove
suppliers.
Additonal information can be found for instance at
www.gisbau.de
Skin and body protection : long sleeved clothing
Hygiene measures : Keep away from food, drink and animal feeding stuffs.
Wash hands before breaks and immediately after handling the
product.
Protective measures : Avoid contact with skin, eyes and clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form : liquid
Colour : translucent
white
Odour : None
Boiling point : > 200 掳C
Thermal decomposition : > 200 掳C
Flash point : > 100 掳C
Method: DIN 51758 (Pensky-Martens Closed Cup)
3/6
SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
Water solubility : Note: practically insoluble
Miscibility with water : immiscible
Viscosity, dynamic : 1,300 - 1,700 mPa.s
10. STABILITY AND REACTIVITY
Conditions to avoid : Note: Take necessary action to avoid static electricity
discharge.
Materials to avoid : Strong acids and strong bases.
Strong oxidizing agents.
Hazardous decomposition : Burning produces obnoxious and toxic fumes.
products
11. TOXICOLOGICAL INFORMATION
Acute oral toxicity : LD50 rat
Dose: > 2,000 mg/kg
Eye irritation : No eye irritation
rabbit
Skin irritation : No skin irritation
rabbit
dermal
Sensitization : none
guinea pig
dermal
12. ECOLOGICAL INFORMATION
Ecotoxicity effects
Further information on ecology
Additional ecological : Avoid subsoil penetration.
information Prevent product from entering drains.
Do not contaminate surface water.
13. DISPOSAL CONSIDERATIONS
Product : Waste Key Number: 070299
Must be incinerated, when in compliance with local regulations.
Container : Empty containers can be landfilled after cleaning, when in
4/6
SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
compliance with the Environmental Protection (Duty of Care)
Regulations 1991.
14. TRANSPORT INFORMATION
Land transport
ADR:
Regulation: Not dangerous goods
RID:
Regulation: Not dangerous goods
Sea transport
IMDG:
Regulation: Not dangerous goods
Air transport
IATA-DGR:
Regulation: Not dangerous goods
15. REGULATORY INFORMATION
Labelling according to EEC Directive
No labelling required
National legislation
Notification status
16. OTHER INFORMATION
List of R-phrases (Section 2)
R36 Irritating to eyes.
The provision of Safety Data Sheets comes under Regulation 6 of CHIP (CHIP is the recognised
abbreviation for the Chemicals Hazard Information and Packaging Regulations). This is an addition
to the Health and Safety at Work Act 1974.Users of products supplied by Huntsman Advanced
Materials should take appropriate measures to ensure working practices are in accordance with the
Control of Substances Hazardous to Health Regulations (COSHH).
5/6
SAFETY DATA SHEET
according to applicable EC directive
Ident-No: RENPIM 5216 POLYOL
Version 3 Print Date 26.07.2007
Revision Date 24.07.2007
All information is based on results gained from experience and tests and is believed to be accurate
but is given without acceptance of liability for loss or damage attributable to reliance thereon as
conditions of use lie outside our control. Users should always carry out sufficient tests to establish
the suitability of any products for their intended applications. No statements shall be incorporated in
any contract unless expressly agreed in writing nor construed as recommending the use of any
product in conflict of any patent. All goods are supplied subject to Huntsman Advanced Materials
General Conditions of Sale.
6/6
|