Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1344-28-1
14335-33-2
1302-78-9
13530-50-2
14808-60-7

File Name: msds_anhrefractories_com---PLASTECH_90P_STDUSA.asp
                                                                                                                 Page 1/6
Printing date 07/23/2007 Reviewed on 07/23/2007

1 Identification of substance
路 Product details
路 Trade name: PLASTECH 90P STD庐
路 Manufacturer/Supplier:
ANH Refractories Company
400 Fairway Drive
Moon Township, PA 15108

General Phone: (412)375-6600
路 Emergency information: CHEMTREC 24 HOUR EMERGENCY PHONE NUMBER: 1-800-424-9300.


2 Composition/Data on components
路 Chemical characterization
路 Description: Mixture of the substances listed below with nonhazardous additions.
路 Components:
1344-28-1 non-fibrous alumina 60-100%
14335-33-2 (3H)phosphoric acid 5-10%
1302-78-9 bentonite 2.5-5%
13530-50-2 aluminum phosphate binder (as P2O5) 1-2.5%
organic fibers 1-2.5%
14808-60-7 crystalline silica (quartz) 0.5-0.9%


3 Hazards identification
路 Hazard description:
Toxic
路 Medical conditions aggravated by exposure to the product: Asthma, chronic lung disease, and skin irritation.
路 Carcinogenicity Information:
Crystalline silica is listed by IARC as a Group 1 Carcinogen "sufficient evidence of carcinogenicity in humans",
and is listed by NTP as K, "Known To Be A Human Carcinogen".
路 Information pertaining to particular dangers for man and environment:
The product has to be labelled due to the calculation procedure of the "General Classification guideline for
preparations of the EU" in the latest valid version.
May cause cancer by inhalation.
Irritating to eyes, respiratory system and skin.
路 NFPA ratings (scale 0-4)
Health = 1
0 Fire = 0
1 0 Reactivity = 0
(Contd. on page 2)
USA




DR
Page 2/6
Printing date 07/23/2007 Reviewed on 07/23/2007

Trade name: PLASTECH 90P STD庐

(Contd. from page 1)
路 HMIS Classification
HEALTH 1 Health: 1
Flammability: 0
FIRE 0
Reactivity: 0
REACTIVITY 0




4 First aid measures
路 After inhalation: Move to fresh air; consult doctor if needed.
路 After skin contact: Immediately wash with water and soap and rinse thoroughly.
路 After eye contact: Flush eyes with water for 15 minutes. If irritation persists, consult a doctor.
路 After swallowing:
This product is intended for industrial applications; in the unlikely event that this product is swallowed, consult a
physician if any adverse medical conditions occur.


5 Fire fighting measures
路 Suitable extinguishing agents: Use fire fighting measures that suit the environment.
路 Protective equipment: No special measures required.


6 Accidental release measures
路 Person-related safety precautions: Not required.
路 Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.
路 Measures for cleaning/collecting:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.


7 Handling and storage
路 Handling:
路 Information for safe handling:
Ensure good ventilation/exhaust at the workplace.
Prevent formation of dust.
路 Information about protection against explosions and fires: Keep respiratory protective device available.
路 Storage:
路 Requirements to be met by storerooms and containers: No special requirements.
路 Information about storage in one common storage facility: Not required.
路 Further information about storage conditions: Store product inside, out of extreme weather conditions.


8 Exposure controls and personal protection
路 Components with limit values that require monitoring at the workplace:
1344-28-1 non-fibrous alumina
PEL 15* 5** mg/m鲁
*total dust **respirable fraction
TLV 10 mg/m鲁
E
(Contd. on page 3)
USA




DR
Page 3/6
Printing date 07/23/2007 Reviewed on 07/23/2007

Trade name: PLASTECH 90P STD庐

(Contd. from page 2)
14808-60-7 crystalline silica (quartz)
PEL see Quartz listing
REL 0.05* mg/m鲁
*respirable dust
TLV 0.025 R mg/m鲁
路 Personal protective equipment:
路 General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
路 Breathing equipment:

NIOSH approved respirators should be used if dust is present. A respiratory protection program
should be implemented if exposures exceed OSHA PELs.

路 Protection of hands:


Protective gloves recommended


The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
路 Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
路 Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
路 Eye protection: Safety glasses with side shields recommended


9 Physical and chemical properties
路 General Information
Solid
Form:
According to product specification
Color:
No specific odor.
Odor:
路 Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
Not applicable.
路 Flash point:
Product is not selfigniting.
路 Auto igniting:
Product does not present an explosion hazard.
路 Danger of explosion:
Not determined.
路 Density:
(Contd. on page 4)
USA




DR
Page 4/6
Printing date 07/23/2007 Reviewed on 07/23/2007

Trade name: PLASTECH 90P STD庐

(Contd. from page 3)

路 Solubility in / Miscibility with
Insoluble.
Water:



10 Stability and reactivity
路 Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
路 Dangerous reactions No dangerous reactions known.
路 Dangerous products of decomposition:
Refractories containing crystalline silica may, after service,contain more or less crystalline silica. Care must be
taken to avoid and/or control dust from demolition. If in doubt of the proper protection, seek advice from a safety
professional.


11 Toxicological information
路 Acute toxicity:
路 Primary acute effects:
路 Skin contact: Irritant to skin and mucous membranes.
路 Eye contact: Irritating effect.
路 Sensitization: No sensitizing effects known.
路 Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic if inhaled.


12 Ecological information
路 General notes:
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
At present there are no ecotoxicological assessments.


13 Disposal considerations
路 Recommendation for Disposal of Product:
As sold, this product is not RCRA hazardous. Final used condition must be evaluated prior to disposal. Dispose
of waste product in accordance with Federal, State and Local regulations.
Dust created during demolition of used product may contain crystalline silica.
路 Recommendation for Disposal of Uncleaned Packaging: Reuse, recycle or treat as industrial waste.


14 Transport information
路 Transport/Additional information: Not dangerous according to available information.


15 Regulations
路 SARA 313 TOXIC CHEMICALS
No material listed in the components in Section 2 of this MSDS is on the SARA 313 list.
路 SARA 302 EXTREMELY HAZARDOUS SUBSTANCES
No material listed in the components in Section 2 of this MSDS is on the SARA 302 list.
(Contd. on page 5)
USA




DR
Page 5/6
Printing date 07/23/2007 Reviewed on 07/23/2007

Trade name: PLASTECH 90P STD庐

(Contd. from page 4)
路 TSCA (Toxic Substances Control Act)
This substance or all the ingredients of this product are on the Chemical Substances Inventory of the Toxic
Substances Control Act (TSCA Inventory). The presence on this list does not require any legal reporting.
路 WHMIS Classification
Class D - Division 2 - Sub Division A
Untested mixture containing a very toxic material
Class D - Division 2 - Sub Division B
Untested mixture containing a toxic material
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all the information required by the CPR.
路 Cancerogenity categories
路 EPA (Environmental Protection Agency)
None of the ingredients is listed.
路 IARC (International Agency for Research on Cancer)
14808-60-7 crystalline silica (quartz) 1
路 NTP (National Toxicology Program)
14808-60-7 crystalline silica (quartz) K
路 TLV (Threshold Limit Value established by ACGIH)
1344-28-1 non-fibrous alumina A4
14808-60-7 crystalline silica (quartz) A2
路 MAK (German Maximum Workplace Concentration)
1344-28-1 non-fibrous alumina 2
14808-60-7 crystalline silica (quartz) 1
路 NIOSH-Ca (National Institute for Occupational Safety and Health)
14808-60-7 crystalline silica (quartz)
路 OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
路 Classification according to EU-guidelines
路 Hazard symbols:
Toxic
路 Hazard-determining components of labeling:
crystalline silica (quartz)
路 Risk phrases:
May cause cancer by inhalation.
Irritating to eyes, respiratory system and skin.
路 Safety phrases:
Avoid exposure - obtain special instructions before use.
When using do not eat or drink.
Do not breathe dust.
Avoid contact with eyes.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
After contact with skin, wash immediately with plenty of soap and water
Wear suitable protective clothing and gloves.
In case of accident or if you feel unwell, seek medical advice immediately.
(Contd. on page 6)
USA




DR
Page 6/6
Printing date 07/23/2007 Reviewed on 07/23/2007

Trade name: PLASTECH 90P STD庐

(Contd. from page 5)
路 National regulations:
路 The following ingredients are known in the state of California to be a cancer risk (Proposition 65):
14808-60-7 crystalline silica (quartz)


16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
路 Contact: Dylan L. Miller 412-375-6712
路 Creation date: 07/23/2007
USA




DR

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
miraclesealants_com---s_seal_enhance_nonvoc.asp 64742-88-7
miracote_com---GLAZETOP_XT_III_COMP_A.asp 54914-37-3 2425-79-8 623-91-6 108-65-6
miracote_com---MVERS_II_Component_B_7255_10-25-07.asp 100-51-6 109-55-7 90-72-2
mnsu_edu---uni_ver-321.asp 497-19-8 14402-88-1 12125-02-9
mobilepropane_com---msds.asp 74-98-6 115-07-1 75-08-1
modernenvironmental_net---Oxine_MSDS.asp 7758-19-2 10049-04-4
molytec_com_au---MSDS_3660.asp 24448-20-2 3006-93-7 81-07-2 112945-52-5 80-15-9 27813-02-1 39382-25-7
monsterjanitorial_com---4772004.asp 98-86-2 77-83-8 628-63-7 100-52-7 140-11-4 91-64-5 141-78-6 64742-96-7
montereyagresources_com---ConditionXtra-0805-m.asp 7783-20-2 7664-38-2
montereyagresources_com---TechMaxGran-m.asp 10-27-6 10-38-2 10034-96-5
montereychemical_com---Moncide-m.asp 2163-80-6 124-65-2 75-60-5
montgomeryschoolsmd_org---Loctite_554.asp 25852-47-5 39382-25-7 80-15-9
mopbucketandwringer_com---2745097.asp 18472-51-0 106-47-8 56-55-1 67-63-0
mopbucketandwringer_com---3382080.asp 7732-18-5 151-21-3 68891-38-3 8051-30-7 61789-40-0 102-71-6 56-81-5 77-92-9 97-59-6 9016-45-9
mouldlife_co_uk---GB-EN-RENPIM_5216_POLYOL-164006700-MSDS.asp 105-59-9
mrcgene_com---msdsbcp.asp 109-70-6
mrdc_com---Copper_Nitrate_Soln._MSDS.asp 7732-18-5 23087-46-9
msds-1620.asp 147-85-3
msds-18037.asp 50-69-1
msds-19096.asp 3211-76-5 7757-93-9
msds-gsk_com---0021300b.asp 55011-47-0 44-20-8 103-90-2 125-69-9 345-78-8
msds-gsk_com---0022500a.asp 44-20-8 103-90-2 58-08-2
msds-gsk_com---0023420b.asp 44-20-8 103-90-2 41444-62-6 58-08-2
msds-gsk_com---0029150f.asp 55011-47-0 44-20-8 103-90-2 125-69-9 345-78-8 113-92-8
msds-gsk_com---0043490c.asp 44-20-8 103-90-2 61-76-7 50-81-7
msds-gsk_com---11056509.asp 44-20-8 20830-75-5
msds-gsk_com---1105690d.asp 44-20-8 55-98-1
msds-gsk_com---1105730c.asp 44-20-8 6112-76-1
msds-gsk_com---1105790a.asp 44-20-8 154-42-7
msds-gsk_com---12346704.asp 44-20-8 126-07-8
msds-gsk_com---12729505.asp 44-20-8 20830-75-5 64-17-5
msds-gsk_com---12746807.asp 44-20-8 67-97-0 59-02-9
msds-gsk_com---12773005.asp 44-20-8 8007-45-2 97-59-6 50-23-7
msds-gsk_com---12792505.asp 44-20-8 103-90-2 93-14-1 61-76-7
msds-gsk_com---12946804.asp 44-20-8 103-90-2 61-76-7
msds-gsk_com---12973801.asp 44-20-8 103-90-2 93-14-1 61-76-7 64-17-5
MSDS_2220-VF_US_11May07.asp 50-01-1 79-14-1 56-81-5 4998-76-9
MSDS_2222-VF_US_03Jul03.asp 107-41-5 57-13-6
MSDS_2331_US_16Aug06.asp 67-63-0 56-81-5 506-59-2 111-41-1 64-19-7 79-14-1 9036-19-5
MSDS_5744_UK_04Jun03.asp 13826-83-0 14075-53-7
MSDS_7210_US_15Mar05.asp 111-76-2 126-86-3
msds_anhrefractories_com---ISO-STAR_MX_USA.asp 1344-28-1 1309-48-4 9003-35-4 7782-42-5 7440-21-3 1333-86-4 4067-16-7
msds_anhrefractories_com---NARTAR_7_USA.asp 1309-48-4 68187-58-6 10124-37-5
msds_anhrefractories_com---PLASTECH_90P_STDUSA.asp 1344-28-1 14335-33-2 1302-78-9 13530-50-2 14808-60-7
msds_anhrefractories_com---UNACAST_30-90_TI_USA.asp 1309-48-4 68187-58-6 10361-03-2
msds_anhrefractories_com---UNACAST_HPU_TI.asp 1344-28-1 68187-58-6 12042-68-1 471-34-1 546-93-0
msds_anhrefractories_com---WO-6878_BATCH_USA.asp 1309-48-4 7782-42-5 7429-90-5 9003-35-4 7440-21-3 4067-16-7
msds_carboline_com---0481a1nl_2_usansi.asp 25036-25-3 540-88-5 108-88-3 25068-38-6 392662-40-7 71-36-3 75-65-0
msds_carboline_com---0497c1nl_2_usansi.asp 108-88-3 67-63-0 392662-40-7 100-51-6 9046-10-0 694-83-7 90-72-2 108-38-3 100-41-4
msds_carboline_com---8222s1nl_2_usansi.asp 014807-96-6 111-76-2 5131-66-8 78-92-2 88-12-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC