Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

64742-88-7

File Name: whitakeroil_com---shellsol_D38.asp
        Shell Chemicals




Data Sheet
Re-Issued: 15-Dec-2003



Product Name SHELLSOL D38

This product is manufactured at more than one production site. The sales specifications of
these products are the same, some typical data however may differ. Click on the
production site below to obtain the right datasheet:


Cotton Valley, LA
Lemont, IL




1
Shell Chemicals



: 64742-88-7
CAS Registry Number
Data Sheet
Re-Issued: 15-Dec-2003



Product Name SHELLSOL D38
Q3380 Lemont, IL
Product Code


Product Category Mineral Spirits Aliphatics


SHELLSOL D38 is a narrow cut mineral spirit type hydrocarbon
Description
solvent manufactured to combine an improved flash point level
with fast drying characteristics. The high degree of general
refining gives this solvent its low level of impurities such as sulphur,
olefins, benzene and total aromatics, and low odor.

Sales Property Method Min Max
Unit
Specification API Gravity @15.6°C ASTM D4052 47.6 58.0
API
Color ASTM D156 +28
Saybolt
Aniline Point ASTM D611 57.2 76.7
°C
Copper Corrosion (3hr ASTM D130 1
-
@100°C)
Distillation, IBP ASTM D86 148.9
°C
Distillation, 50%v ASTM D86 173.9
°C
Distillation, DP ASTM D86 185
°C
Flash Point (TCC) ASTM D56 37.8
°C
Aromatics ASTM D1319 1.0
% v/v


# Indicates guaranteed property with typical result on Certificate of Analysis.




COA Comments Product meets ASTM D-235, Type IV, Class C; FDA CFR172.884 and
178.3650. Product meets quaranteed limits, but are not routinely
tested. Conformance to specification limits based on ASTM E29-67
Rounding-off method. Product as produced meets the Mil-PRF-680-
type I requirements.



1
Unit Method
Property Value
Typical Properties
°F [°C] ASTM D86
Distillation, IBP 318 [159]
°F [°C] ASTM D86
Distillation, 50%v 331 [166]
°F [°C] ASTM D86
Distillation, DP 358 [181]
°F [°C] ASTM D56
Flash Point 106 [41]
- ASTM D287
API Gravity 50.8
lb/gal Calculated
Density @15.6°C 6.46
%v/v ASTM D1319
Aromatics < 0.2
ppm GC
Benzene < 0.5
%v/v GC
Cycloparaffins 57
%v/v GC
Paraffins 42
ppm ASTM D4045
Sulfur <1
°F [°C] ASTM D611
Aniline Point (M=Mixed) 151 [66]
- ASTM D1133
Kauri-Butanol Value 34
(cal/cm³)^½ -
Hildebrand Solubility 7.9
Parameter
Saybolt ASTM D156
Color +30
%wt ASTM D1613
Acidity as Acetic Acid < 0.001
mmHg ASTM D5191
Vapor Pressure @20°C 2.8
- ASTM D3539
Relative Evaporation 0.21
Rate (nBuAc=1)
- ASTM D1093
Acidity Distillation Neutral
Residue
g/100mL ASTM D1353
Non Volatile Matter < 0.001
- ASTM D235
Doctor Test Negative
- ASTM D130
Copper Corrosion (3hr 1A
@100°C)
- ASTM D1218
Refractive Index @20°C 1.426
cSt ASTM D445
Viscosity @20°C 1.19
- ASTM D1218
Refractive Index @20°C 1.426
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.

For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.

All products purchased from or supplied by Shell are subject to
Warranty

2
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.


The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
its own separate identity.


SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.




SC: 2953-00




3
Shell Chemicals



: 64742-88-7
CAS Registry Number
Data Sheet
Re-Issued: 15-Dec-2003



Product Name SHELLSOL D38
Q3380 Cotton Valley, LA
Product Code


Product Category Mineral Spirits Aliphatics


SHELLSOL D38 is a narrow cut mineral spirit type hydrocarbon
Description
solvent manufactured to combine an improved flash point level
with fast drying characteristics. The high degree of general
refining gives this solvent its low level of impurities such as sulphur,
olefins, benzene and total aromatics, and low odor.

Sales Property Method Min Max
Unit
Specification API Gravity @15.6°C ASTM D4052 47.6 58.0
API
Color ASTM D156 +28
Saybolt
Aniline Point ASTM D611 57.2 76.7
°C
Copper Corrosion (3hr ASTM D130 1
-
@100°C)
Distillation, IBP ASTM D86 148.9
°C
Distillation, 50%v ASTM D86 173.9
°C
Distillation, DP ASTM D86 185
°C
Flash Point (TCC) ASTM D56 37.8
°C
Aromatics ASTM D1319 1.0
% v/v


# Indicates guaranteed property with typical result on Certificate of Analysis.




COA Comments Product meets ASTM D-235, Type IV, Class C; FDA CFR172.884 and
178.3650. Product meets quaranteed limits, but are not routinely
tested. Conformance to specification limits based on ASTM E29-67
Rounding-off method. Product as produced meets the Mil-PRF-680-
type I requirements.



1
Unit Method
Property Value
Typical Properties
°F [°C] ASTM D86
Distillation, IBP 304 [151]
°F [°C] ASTM D86
Distillation, 50%v 322 [161]
°F [°C] ASTM D86
Distillation, DP 358 [181]
°F [°C] ASTM D56
Flash Point 102 [39]
- ASTM D4052
API Gravity 56.3
lb/gal ASTM D1250
Density @15.6°C 6.27
- ASTM D1747
Refractive Index @25°C 1.417
%v/v ASTM D1319
Aromatics 0.4
°F [°C] ASTM D611
Aniline Point (M=Mixed) 162 [72]
- ASTM D1133
Kauri-Butanol Value 31
Saybolt ASTM D156
Color +30
- ASTM D130
Copper Corrosion (3hr 1A
@100°C)
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.

For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.

All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.


The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
2
its own separate identity.


SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.




SC: 2953-00




3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
whitakeroil_com---NX795td_pds.asp N/A
whitakeroil_com---NX795_pds.asp 25265-77-4
whitakeroil_com---N_PROPYL_ACETATE.asp 109-60-4
whitakeroil_com---N_PROPYL_ACETATE_td.asp N/A
whitakeroil_com---N_PROPYL_ALCOHOL_td.asp N/A
whitakeroil_com---Paraffin_Wax_OK888_MSDS.asp 8002-74-2
whitakeroil_com---Paraffin_Wax_OK888_PDS.asp 32-87-5 32-87-7
whitakeroil_com---Paralux_6001R_MSDS.asp 64742-54-7
whitakeroil_com---Paralux_701R_tech_data.asp N/A
whitakeroil_com---PCBTF_MSDS.asp 98-56-6 88-16-4 98-15-7 328-84-7
whitakeroil_com---PCBTF_TECH.asp 98-56-6
whitakeroil_com---perklone_grades_usa.asp 000127-18-4
whitakeroil_com---PG-IND.asp N/A
whitakeroil_com---PGIND.asp 57-55-6
whitakeroil_com---PGUSP.asp 57-55-6
whitakeroil_com---PhosphoricAcid85_TECH.asp 7664-38-2
whitakeroil_com---PineOil150_MSDS.asp 8002-09-3
whitakeroil_com---PM_Acetate-Lyondell.asp 108-65-6 70657-70-4
whitakeroil_com---PNP_msds.asp 1569-01-3 10215-30-2 57-55-6 25265-71-8 29911-27-1
whitakeroil_com---PNP_td.asp N/A
whitakeroil_com---PreChargeAF.asp 107-21-1 111-46-6
whitakeroil_com---Propylene_carbonate_msds.asp 108-32-7 75-56-9
whitakeroil_com---PTB.asp 57018-52-7
whitakeroil_com---RubberSolvent.asp N/A
whitakeroil_com---Salt_MSDS.asp 7647-14-5 13601-19-9
whitakeroil_com---SBA_msds.asp 78-92-2
whitakeroil_com---SDA_3C_200.asp 64-17-5 67-63-0
whitakeroil_com---shellsol_A150.asp 64742-94-5
whitakeroil_com---shellsol_D38.asp 64742-88-7
whitakeroil_com---shellsol_D60.asp 64742-88-7
whitakeroil_com---shellsol_oms1.asp 64741-65-7
whitakeroil_com---shellsol_OMS_7-2-04.asp 64741-65-7
whitakeroil_com---shellsol_VMP_naphtha_HT.asp 64742-89-8
whitakeroil_com---SHELLSOL__D38_MSDS.asp 64742-88-7
whitakeroil_com---Shell_sol_d60_msds.asp 64742-88-7
whitakeroil_com---Sod.Form.Sufoxylate_TECH.asp 149-44-0
whitakeroil_com---Sod.Glucoheptonate_MSDS.asp 31138-65-5
whitakeroil_com---Sod.Glucoheptonate_TECH.asp N/A
whitakeroil_com---Sod.LaurylEther_TECH.asp 04-05-0
whitakeroil_com---Sod.Lauryl_TECH.asp 08-26-0
whitakeroil_com---Sod.Metasilicate_MSDS.asp 6834-92-0 7732-18-5
whitakeroil_com---Sod.Metasilicate_TECH.asp N/A
whitakeroil_com---Sod.Silicate_MSDS.asp 7732-18-5 1344-09-8
whitakeroil_com---Sod.Silicate_TECH.asp N/A
whitakeroil_com---Sod.XY_TECH.asp 1300-72-7
whitakeroil_com---Soltrol_10.asp 70024-92-9 540-84-1 31394-54-4 26635-64-3
whitakeroil_com---Soltrol_100.asp 55-19-3 68551-16-6
whitakeroil_com---Soltrol_10_Isoparaffin_Solvent.asp 70024-92-9
whitakeroil_com---Soltrol_130.asp 68551-17-7
whitakeroil_com---Soltrol_130_Isoparaffin.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC