Shell Chemicals
Data Sheet
Re-Issued: 10-Nov-2003
Product Name SHELLSOL D60
This product is manufactured at more than one production site. The sales specifications of
these products are the same, some typical data however may differ. Click on the
production site below to obtain the right datasheet:
Cotton Valley, LA
Lemont, IL
1
Shell Chemicals
: 64742-88-7
CAS Registry Number
Data Sheet
Re-Issued: 03-Nov-2003
Product Name SHELLSOL D60
Q3522 Lemont, IL
Product Code
Product Category Mineral Spirits Aliphatics
SHELLSOL D60 is a medium evaporating, high flash mineral spirit
Description
type hydrocarbon solvent. The high degree of general refining
gives this solvent its low level of impurities such as sulphur, olefins,
benzene and total aromatics, and low odor. In general for
transport, with a flash point >142°F (>61°C), SHELLSOL D60 may
be classified as combustible rather than as flammable liquid
Sales Property Method Min Max
Unit
Specification API Gravity @60°F ASTM D4052 41.0 54.0
API
Color ASTM D156 +28
Saybolt
Aniline Point ASTM D611 76.7
°C
Density @15°C ASTM D4052 763 820
kg/m³
Copper Corrosion (3hr ASTM D130 1
-
@100°C)
Distillation, IBP ASTM D86 176.7
°C
Distillation, DP ASTM D86 212.8
°C
Specific Gravity ASTM D4052 0.763 0.820
-
@15.6°C/15.6°C
Flash Point (TCC) ASTM D56 61.1
°C
Aromatics ASTM D1319 1.0
% v/v
# Indicates guaranteed property with typical result on Certificate of Analysis.
COA Comments Meets FDA21CFR172.884 and 178.3650.
Product as produced complies with the MIL PRF-680 - Type II
specification
1
Unit Method
Property Value
Typical Properties
°F [°C] ASTM D86
Distillation, IBP 385 [196]
°F [°C] ASTM D86
Distillation, 50%v 388 [198]
°F [°C] ASTM D86
Distillation, DP 406 [208]
°F [°C] ASTM D56
Flash Point 151 [66]
- ASTM D287
API Gravity 46.4
lb/gal Calculated
Density @15.6°C 6.61
%v/v ASTM D1319
Aromatics 0.6
ppm GC
Benzene none detected
%v/v GC
Cycloparaffins 50
%v/v GC
Paraffins 50
ppm ASTM D4045
Sulfur <1
°F [°C] ASTM D611
Aniline Point (M=Mixed) 160 [71]
- ASTM D1133
Kauri-Butanol Value 31
(cal/cm³)^½ -
Hildebrand Solubility 7.7
Parameter
Saybolt ASTM D156
Color +30
%wt ASTM D1613
Acidity as Acetic Acid < 0.001
mmHg ASTM D5191
Vapor Pressure @20°C <1
psi -
Vapor Pressure (Reid) 0.15
- ASTM D3539
Relative Evaporation 0.08
Rate (nBuAc=1)
- ASTM D1093
Acidity Distillation Neutral
Residue
g/100mL ASTM D1353
Non Volatile Matter < 0.001
- ASTM D235
Doctor Test Negative
- ASTM D130
Copper Corrosion (3hr 1A
@100°C)
- ASTM D1218
Refractive Index @20°C 1.432
cSt ASTM D445
Viscosity @20°C 1.72
- ASTM D1218
Refractive Index @20°C 1.432
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.
For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.
2
All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.
The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
its own separate identity.
SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.
SC: 2929-00
3
Shell Chemicals
: 64742-88-7
CAS Registry Number
Data Sheet
Re-Issued: 03-Nov-2003
Product Name SHELLSOL D60
Q3522 Cotton Valley, LA
Product Code
Product Category Mineral Spirits Aliphatics
SHELLSOL D60 is a medium evaporating, high flash mineral spirit
Description
type hydrocarbon solvent. The high degree of general refining
gives this solvent its low level of impurities such as sulphur, olefins,
benzene and total aromatics, and low odor. In general for
transport, with a flash point >142°F (>61°C), SHELLSOL D60 may
be classified as combustible rather than as flammable liquid
Sales Property Method Min Max
Unit
Specification API Gravity @60°F ASTM D4052 41.0 54.0
API
Color ASTM D156 +28
Saybolt
Aniline Point ASTM D611 76.7
°C
Density @15°C ASTM D4052 763 820
kg/m³
Copper Corrosion (3hr ASTM D130 1
-
@100°C)
Distillation, IBP ASTM D86 176.7
°C
Distillation, DP ASTM D86 212.8
°C
Specific Gravity ASTM D4052 0.763 0.820
-
@15.6°C/15.6°C
Flash Point (TCC) ASTM D56 61.1
°C
Aromatics ASTM D1319 1.0
% v/v
# Indicates guaranteed property with typical result on Certificate of Analysis.
COA Comments Meets FDA21CFR172.884 and 178.3650.
Product as produced complies with the MIL PRF-680 - Type II
specification
1
Unit Method
Property Value
Typical Properties
°F [°C] ASTM D86
Distillation, IBP 365 [185]
°F [°C] ASTM D86
Distillation, 50%v 385 [196]
°F [°C] ASTM D86
Distillation, DP 410 [210]
°F [°C] ASTM D56
Flash Point 142 [61]
- ASTM D4052
API Gravity 52.0
lb/gal ASTM D1250
Density @15.6°C 6.42
- ASTM D1218
Refractive Index @25°C 1.427
%v/v ASTM D1319
Aromatics 0.4
°F [°C] ASTM D611
Aniline Point (M=Mixed) 167 [75]
Saybolt ASTM D156
Color +30
- ASTM D130
Copper Corrosion (3hr 1A
@100°C)
cSt ASTM D445
Viscosity @37.8°C 1.25
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.
For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.
All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.
The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
2
its own separate identity.
SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.
SC: 2929-00
3
|