MSDS PAGE: CAS 64742-89-8 MSDS whitakeroil_com---shellsol_VMP_naphtha

Shell Chemicals

Data Sheet
Re-Issued: 02-Jul-2003

Product Name VM&P Naphtha HT

This product is manufactured at more than one production site. Click on the production
site below to obtain the right datasheet:

Cotton Valley, LA
Lemont, IL
Canada

1
Shell Chemicals

: 64742-89-8
CAS Registry Number
Data Sheet
Re-Issued: 21-Nov-2003

Product Name VM&P Naphtha HT
Q6002 Sarnia
Product Code

Product Category Fast-Medium Evaporating Aliphatics

VM&P Naphtha HT is a medium evaporating hydrocarbon solvent.
Description
It has an increased cycloparaffin content and hence solvency. The
high degree of general refining gives this solvent its low level of
impurities such as sulphur, olefins, benzene and total aromatics
and low odor.

Sales Property Method Min Max
Unit
Specification API Gravity @15.6°C ASTM D4052 52.2 63.1
API
Color ASTM D156 +28
Saybolt
Aniline Point ASTM D611 71.1
°C
Copper Corrosion (3hr ASTM D130 1
-
@100°C)
Distillation, IBP ASTM D86 118.3
°C
Distillation, DP ASTM D86 148.9
°C
Flash Point (TCC) ASTM D56 10
°C
Aromatics ASTM D3257 1.0
% v/v

# Indicates guaranteed property with typical result on Certificate of Analysis.

COA Comments 1) Product meets ASTM D-3735 specification for VM&P Napthas,
Type I and III and meets 21 CFR 172.250 for Petroleum Naptha. 2)
Product meets guaranteed limits, but are not routinely tested. 3)
Conformance to specification limits are in accordance with ASTM
E29-67, Rounding-off Method.

Unit Method
Property Value
Typical Properties
°C ASTM D86
Distillation, IBP 121
1
°C ASTM D86
Distillation, 50%v 126
°C ASTM D86
Distillation, DP 140
°C ASTM D56
Flash Point 14
- ASTM D4052
API Gravity 57.9
%wt GC
Aromatics <0.1
ppm GC
Benzene <1
[mg/kg]
%wt GC
Cycloparaffins 52
%wt GC
Paraffins 48
°C ASTM D611
Aniline Point (M=Mixed) 60
- ASTM D1133
Kauri-Butanol Value 36
(cal/cm³)^½ -
Hildebrand Solubility 7.6
Parameter
Saybolt ASTM D156
Color +30
kPa Calculated
Vapor Pressure @20°C 1.3
- ASTM D3539
Relative Evaporation 1.4
Rate (nBuAc=1)
°C ASTM E659
Auto Ignition 260
Temperature
- -
Fractional Polarity 0
- -
Hydrogen Bonding 0.0
Index
g/mol Calculated
Molecular Weight 118
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.

For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.

All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding

2
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.

The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
its own separate identity.

SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.

SC: 2951-00

3
Shell Chemicals

: 64742-89-8
CAS Registry Number
Data Sheet
Re-Issued: 02-Jul-2003

Product Name VM&P Naphtha HT
Q6002 Lemont, IL
Product Code

Product Category Fast-Medium Evaporating Aliphatics

VM&P Naphtha HT is a medium evaporating hydrocarbon solvent.
Description
It has an increased cycloparaffin content and hence solvency. The
high degree of general refining gives this solvent its low level of
impurities such as sulphur, olefins, benzene and total aromatics
and low odor.

Sales Property Method Min Max
Unit
Specification API Gravity @60F ASTM D4052 52.2 63.1
API
Aniline Point ASTM D611 71.1
°C
Color, Saybolt ASTM D156 +28
Saybolt
Copper Corrosion, 3hr ASTM D130 1
@100C
Distillation, IBP ASTM D86 118.3
°C
Distillation, DP ASTM D86 148.9
°C
Flashpoint, TCC ASTM D56 10
°C
Aromatics ASTM D3257 1.0
%v

COA Comments 1) Product meets ASTM D-3735 specification for VM&P Napthas,
Type I and III and meets 21 CFR 172.250 for Petroleum Naptha. 2)
Product meets guaranteed limits, but are not routinely tested. 3)
Conformance to specification limits are in accordance with ASTM
E29-67, Rounding-off Method.

Unit Method
Property Value
Typical Properties
°F[°C] ASTM D86
Distillation, IBP 266 [130]
°F[°C] ASTM D86
Distillation, 50% 273 [134]
°F[°C] ASTM D86
Distillation, DP 288 [142]

1
°F[°C] ASTM D56
Flash Point 66 [19]
- ASTM D287
API Gravity 54.5
- Calculated
Specific Gravity 0.760
15.6/15.6°C
lb/gal Calculated
Density @15.6°C 6.32
%v GC
Aromatics 0.2
%v GC
Benzene < 0.002
%v GC
Cycloparaffins 67
%v GC
Paraffins 33
ppm ASTM D4045
Sulphur (total) <1
°F[°C] ASTM D611
Aniline Point (M=Mixed) 151 [66]
- ASTM D1133
Kauri-Butanol Value 36
(cal/cm³)^½ -
Hildebrand Solubility 7.7
Parameter
Saybolt ASTM D156
Color +30
%wt ASTM D1613
Acidity as acetic acid < 0.001
mmHg ASTM D5191
Vapour pressure @20°C 11
- ASTM D3539
Relative Evaporation 1.0
Rate (nBuAc=1)
- ASTM D1093
Acidity of residue Neutral
g/100ml ASTM D1353
Nonvolatile Residue < 0.001
- ASTM D235
Doctor test Negative
- ASTM D130
Copper Corrosion, 3hr 1A
@100°C
- ASTM D1218
Refractive Index @20°C 1.420
cSt ASTM D445
Viscosity @20°C 0.79
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.

For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.

All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,

2
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.

The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
its own separate identity.

SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.

SC: 2951-00

3
Shell Chemicals

: 64742-89-8
CAS Registry Number
Data Sheet
Re-Issued: 02-Jul-2003

Product Name VM&P Naphtha HT
Q6002 Cotton Valley, LA
Product Code

Product Category Fast-Medium Evaporating Aliphatics

VM&P Naphtha HT is a medium evaporating hydrocarbon solvent.
Description
It has an increased cycloparaffin content and hence solvency. The
high degree of general refining gives this solvent its low level of
impurities such as sulphur, olefins, benzene and total aromatics
and low odor.

Sales Property Method Min Max
Unit
Specification API Gravity @15.6C ASTM D4052 52.2 63.1
API
Aniline Point ASTM D611 71.1
°C
Color, Saybolt ASTM D156 +28
Saybolt
Copper Corrosion, 3hr ASTM D130 1
@100C
Distillation, IBP ASTM D86 118.3
°C
Distillation, DP ASTM D86 148.9
°C
Flashpoint, TCC ASTM D56 10
°C
Aromatics ASTM D3257 1.0
%v

COA Comments 1) Product meets ASTM D-3735 specification for VM&P Napthas,
Type I and III and meets 21 CFR 172.250 for Petroleum Naptha. 2)
Product meets guaranteed limits, but are not routinely tested. 3)
Conformance to specification limits are in accordance with ASTM
E29-67, Rounding-off Method.

Unit Method
Property Value
Typical Properties
°F[°C] ASTM D86
Distillation, IBP 252 [122]
°F[°C] ASTM D86
Distillation, 50% 264 [129]
°F[°C] ASTM D86
Distillation, DP 291 [144]

1
°F[°C] ASTM D56
Flash Point 55 [13]
- ASTM D4052
API Gravity 59.6
- ASTM D1250
Specific Gravity 0.740
15.6/15.6°C
lb/gal ASTM D1250
Density @15.6°C 6.16
- ASTM D1747
Refractive Index @25°C 1.408
%v ASTM D3257
Aromatics < 0.2
°F[°C] ASTM D611
Aniline Point (M=Mixed) 153 [67]
- ASTM D1133
Kauri-Butanol Value 31
Saybolt ASTM D156
Color +30
- ASTM D130
Copper Corrosion, 3hr 1A
@100°C
Information on product storage and handling, hazards and
Health, Safety &
environmental regulation status is in the Material Data Sheet. To
Environment
obtain a Material Data Sheet, visit our website at
www.shell.com/chemicals.

For further information, contact your Shell representative, visit our
Contact
website at www.shell.com/chemicals, or call the 'Shell Chemicals'
order center at 1 800 USA SHELL in US or 1 888 791 4314 in
Canada.

All products purchased from or supplied by Shell are subject to
Warranty
terms and conditions set out in the contract, order
acknowledgement and/or bill of lading. Shell warrants that its
product will meet those specifications designated as such herein or
in other publications. All other information including that herein,
supplied by Shell is considered accurate but is furnished upon the
express condition that the customer shall make its own assessment
to determine the products suitability for a particular purpose. Shell
makes no other warranty either expressed or implied, regarding
such other information, the data upon which the same is based, or
the results to be obtained from use thereof; that any products shall
be merchantable or fit for any purpose; or that the use of such
other information or product will not infringe any patent.

The expression 'Shell Chemicals' refers to the companies of the
Royal Dutch/Shell Group which are engaged in chemical
businesses. Each of the companies which make up the Royal
Dutch/Shell Group of companies is an independent entity and has
its own separate identity.

2
SHELLSOL, OXITOL and PROXITOL are trademarks of the Royal
Dutch/Shell Group of companies.

SC: 2951-00

3

ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP

NAME	CAS
whitakeroil_com---NX795td_pds.asp	N/A
whitakeroil_com---NX795_pds.asp	25265-77-4
whitakeroil_com---N_PROPYL_ACETATE.asp	109-60-4
whitakeroil_com---N_PROPYL_ACETATE_td.asp	N/A
whitakeroil_com---N_PROPYL_ALCOHOL_td.asp	N/A
whitakeroil_com---Paraffin_Wax_OK888_MSDS.asp	8002-74-2
whitakeroil_com---Paraffin_Wax_OK888_PDS.asp	32-87-5 32-87-7
whitakeroil_com---Paralux_6001R_MSDS.asp	64742-54-7
whitakeroil_com---Paralux_701R_tech_data.asp	N/A
whitakeroil_com---PCBTF_MSDS.asp	98-56-6 88-16-4 98-15-7 328-84-7
whitakeroil_com---PCBTF_TECH.asp	98-56-6
whitakeroil_com---perklone_grades_usa.asp	000127-18-4
whitakeroil_com---PG-IND.asp	N/A
whitakeroil_com---PGIND.asp	57-55-6
whitakeroil_com---PGUSP.asp	57-55-6
whitakeroil_com---PhosphoricAcid85_TECH.asp	7664-38-2
whitakeroil_com---PineOil150_MSDS.asp	8002-09-3
whitakeroil_com---PM_Acetate-Lyondell.asp	108-65-6 70657-70-4
whitakeroil_com---PNP_msds.asp	1569-01-3 10215-30-2 57-55-6 25265-71-8 29911-27-1
whitakeroil_com---PNP_td.asp	N/A
whitakeroil_com---PreChargeAF.asp	107-21-1 111-46-6
whitakeroil_com---Propylene_carbonate_msds.asp	108-32-7 75-56-9
whitakeroil_com---PTB.asp	57018-52-7
whitakeroil_com---RubberSolvent.asp	N/A
whitakeroil_com---Salt_MSDS.asp	7647-14-5 13601-19-9
whitakeroil_com---SBA_msds.asp	78-92-2
whitakeroil_com---SDA_3C_200.asp	64-17-5 67-63-0
whitakeroil_com---shellsol_A150.asp	64742-94-5
whitakeroil_com---shellsol_D38.asp	64742-88-7
whitakeroil_com---shellsol_D60.asp	64742-88-7
whitakeroil_com---shellsol_oms1.asp	64741-65-7
whitakeroil_com---shellsol_OMS_7-2-04.asp	64741-65-7
whitakeroil_com---shellsol_VMP_naphtha_HT.asp	64742-89-8
whitakeroil_com---SHELLSOL__D38_MSDS.asp	64742-88-7
whitakeroil_com---Shell_sol_d60_msds.asp	64742-88-7
whitakeroil_com---Sod.Form.Sufoxylate_TECH.asp	149-44-0
whitakeroil_com---Sod.Glucoheptonate_MSDS.asp	31138-65-5
whitakeroil_com---Sod.Glucoheptonate_TECH.asp	N/A
whitakeroil_com---Sod.LaurylEther_TECH.asp	04-05-0
whitakeroil_com---Sod.Lauryl_TECH.asp	08-26-0
whitakeroil_com---Sod.Metasilicate_MSDS.asp	6834-92-0 7732-18-5
whitakeroil_com---Sod.Metasilicate_TECH.asp	N/A
whitakeroil_com---Sod.Silicate_MSDS.asp	7732-18-5 1344-09-8
whitakeroil_com---Sod.Silicate_TECH.asp	N/A
whitakeroil_com---Sod.XY_TECH.asp	1300-72-7
whitakeroil_com---Soltrol_10.asp	70024-92-9 540-84-1 31394-54-4 26635-64-3
whitakeroil_com---Soltrol_100.asp	55-19-3 68551-16-6
whitakeroil_com---Soltrol_10_Isoparaffin_Solvent.asp	70024-92-9
whitakeroil_com---Soltrol_130.asp	68551-17-7
whitakeroil_com---Soltrol_130_Isoparaffin.asp	N/A