1 l
I MATERIAL SAFETY DATA SHEET 1
i I
=========================================================================
SECTION 1 - CHEMICAL PRODUCT AND COMPANYIDENTIFICATION
:=========================================================================
PRODUCT NAME: BUEHLER MASTERMET
IDENTIFICATION NUMBER: 40-6370-064, 40-6370-006
PRODUCTUSE/CLASS: Polishing compound
SUPPLIER:
Buehler, Ltd.
41 Waukegan Road
Lake B1uf{, IL 60044
EMERGENCY: 800-424-9300
INFORMATION: 847-295-6500
PREPARER: Technical Department, PHONE: 847-295-6500, PREPARE DATE 08/22/00
,======= I
1================================================================,
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS-
1 ===-=======--=============---============-=================, "
ITEM CHEMICAL
NAME CAS NUMBER WT/WT%
~o Hazardous Materials per 29 CFR 1910.1200
(See Section 16 for abbreviation legend)
HAZARDS IDENTIFICATION
SECTION 3 -
============
1==================='
EMERGENCY OVERVIEW: Not expected to present a hazard in normal industrial
use.
ACUTE EFFECTS EYE CONTACT:
- Not expected to present a hazard in normal
industrial use.
ACUTE EFFECTS SKIN CONTACT: Substance
- may cause slight skin irritation.
ACUTE EFFECTS INHALATION: Not expected to present a hazard in no Dna 1
-
industrial use (room temperature processing).
ACUTE EFFECTS INGESTION
- May cause nausea and vomiting.
None known,
CHRONIC OVEREXPOSURE EFFECTS:
OTHER INFORMATION: No information.
PRIMARY ROUTE(S) OF ENTRY: None known
1==================================================='
SECTION
4 FIRSTAID MEASURES
-
1
SKIN CONTACT: Wash with soap and water. Get medical attention if
irritation develops or persists.
Not a likely route of exposure. If symptoms occur, remove to
INHALATION:
Seek medical attention if symptoms persist.
fresh air.
Continued on Page 2)
9104595
~
Product: 40-6370-064,
40-6370-006,
?reparation Date: 08/22/00 Page 2
1=========================================================================1
SECTION 4 - FIRST AID MEASURES I
I
1=========================================================================1
INGESTION: Swallowing less than an ounce will not cause significant harm.
For larger amounts, do not induce vomiting, but give one or two glasses of
water to drink and get medical attention~
NOTES TO PHYSICIAN: No information.
1=========================================================================1
SECTION
5 FIRE FIGHTING
MEASURES I
-
I
1=========================================================================1
FLASH POINT:! N.A. LOWEREXPLOSIVE LIMIT: N.A.
UPPER EXPLOSIVE LIMIT: N.A.
No data
AUTOIGNITION TEMPERATURE
N/A
EXTINGUISHING MEDIA
UNUSUAL FIRE AND EXPLOSION HAZARDS Does not burn.
SPECIAL FIREFIGHTING PROCEDURES Does not burn
1=========================================================================1
SECTION6 ACCIDENTAL
RELEASEMEASURES I
-
I
1=========================================================================1
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Reclaim clean
material. Absorb residue with clay, towels, or other absorbent material.
Sweep up or pick up residue. Flush spill area with water.
I================~ -~~~~~~~~~~~~~~~===========================I
HANDLINGAND STORAGE
SECTION 7 -
1 1
I=========================~~~~~~~~~~~=====================================1
HANDLING: Follow all MSDS/label precautions even after container is
emptied because it may retain product residues.
STORAGE: Keep from freezing
I================================~ ~---~~~~~~~~~~~~~.
SECTION 8 - EXPOSURECONTROLS/PERSONAL PROTECTION
I
ENGINEERING CONTROLS: General ventilation usually adequate.
-~
I=======================================~---~
RESPIRATORY PROTECTION None normally required under general ventilation
SKIN PROTECTION: Cloth or synthetic gloves.
EYE PROTECTION: Safety glasses.
OTHER PROTECTIVE EQUIPMENT: Accessible eye wash
HYGIENIC PRACTICES: Follow good general industrial safety practices during
use. Do not smoke or eat during use.
9104595
Prnrl11rt- : 40-6370-064, 40-6370-006
Page 3
Preparation
Date
I================k===============~ ~~---
---============1
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
I
1=============================================================,
BOILING RANGE: 212 - Unk deg F VAPOR DENSITY: Unknown
ODOR : No appreciable ODORTHRESHOLD: No data
APPEARANCE I : White EVAPoRATION RATE: Unknown
SOLUBILITY IN H2O: Moderate
FREEZE POINT: < 32 deg F SPECIFIC GRAVITY: 1.0153
VAPOR PRESSURE: No data pH @ 0.0 % : N/A
PHYSICAL STATE: liquid VISCOSITY: Medium
COEFFICIENT OF WATER/OIL DISTRIBUTION: No data
(See Section 16 for abbreviation legend)
1===========================================================,
SECTION 10 - STABILITY AND REACTIVITY
1
1===========================================================,
CONDITIONS TO AVOID: None known.
INCOMPATIBILITY Strong bases or oxidants
HAZARDOUS DECOMPOSITION PRODUCTS Oxides of carbon
HAZARDOUS POLYMERIZATION Will not occur under normal conditions
STABILITY: This product is stable under normal storage conditions
1=======--
DOT PROPER SHIPPING NAME: Not regulated
I==============~
DOT TECHNICAL NAME: N/A
DOT HAZARDCLASS: N/A HAZARDSUBCLASS:N/A
DOTUN/NA NUMBER: N/A PACKINGGROUP:N/A RESP. GUIDE PAGE
INTERNATIONAL SHIPPING NAME: Not regulated
INTERNATIONAL ID NUMBER: N/A
IMDG CLASS (1~,2~): N/A IMDG PAGE NUMBER: N/A
IMDG EMS: N/A IATA CLASS (10,20): N/A
Continued on Page 4)
9104595
Product 40-6370-064, 40-637
Page 4
===========1
CERCLA - SARA HAZARD CATEGORY:
This product has be~ reviewed, and is considered, under applicable
definitions, to meet the following categories: NONE
SARA SECTION 313:
This product cqntains the following substances subject to the reporting
requirements of Section 313 and 40 CFR part 372:
CHEMICALNAME--~ CAS NUMBER WT/WT% IS LESS THAN
No SARA Section 313 components exist in this product.
TOXIC SUBSTANCES CONTROL ACT:
The chemical substances in this product are on the TSCA Section 8
Inventory.
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States
CHEMICALNAME CAS NUMBER
No components found.
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but may be among the top five
components in this product:
CHEMICALNAME CAS NUMBER
Water 7732-18-5
Amorphous silicon dioxide 112945-52-5
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients may be present in the product at
greater than 3%:
~- CHEMICAL NAME CAS NUMBER
Water 7732-18-5
Amorphous silicon dioxide 112945-52-5
CALIFORNIA PROPOSITION 65:
No Proposition 65 chemicals known to exist in this product
VOLATILE ORGANIC COMPOUNDS(VOCS): 0 grams/ltr
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: NONE
COMPONENT
RCRA CLASSIFICATIONS: No information.
COMPONENT
RCRA CODES: No information.
CERCLA RQ VALUE (MINIMUM): No information
Continued on Page 5)
Q1n4C;QC;
PREVIOUS MSDS REVISION DATE: various
REASON FOR REVISION: new format
ADMINISTRATIVE REVISION DATE: 07/19/01
REASONFOR ADMINISTRATIVE REVISION: Additions to Section 16
LEGEND: N.A. No information, N.E Not Established,
- -
N.D. - Not Determined
ABBREVIATIONS: ACGIH = American Conference of Governmental Industrial
Hygienists; OSHA = US Occupational Safety and Health Administration; UK =
TLV-TWA = Threshold
United Kingdom; Limit Value-Time Weighted Average (8
C = Ceiling
hrs); STEL = Short-Term Exposure Limit (15 min); Value; PEL =
Permissible Exposure Limit
DISCLAIMER: To the best of our knowledge, the information contained in
this MSDS is accurate or is obtained from sources believed to be accurate.
However, no liability, expressed or implied, is assumed for the accuracy or
completeness of the information contained herein. Buyer assumes liability
in its use of the material.
9104595
|