Sandell Manufacturing Company, Inc.
Sandell
www.sandellmfg.com e-mail: moreinfo@sandellmfg.com
S-600 Primer
CORPORATE OFFICE BRANCH OFFICE
310 Wayto Rd. 鈥? Schenectady, NY 12303 1700 Vanderbilt Rd. 鈥? Birmingham, AL 35234
Phone: (518) 357-9757 Phone: (205) 263-1030
MATERIAL SAFETY DATA SHEET
1 (800) 283-3888 鈥? Fax: (518) 357-9636 1 (877) SANDELL 鈥? Fax: (205) 263-1033
SECTION 1 SECTION 3 SECTION 6
MATERIAL INDENTIFICATION FIRE AND EXPLOSION HAZARD DATA CONTROL AND PROTECTIVE
INFORMATION MEASURES
Flash Point: 185掳F (85掳C)
Trade Names and Synonyms: Sando-Seal Respiratory Protection: Respirator in confined
Method Used: PMCC
S-600 Primer area.
Flammability Limits: N/A
Chemical Names and Family: Latex Based Ventilation: Local exhaust recommended.
Extinguishing Media: Foam, Carbon Dioxide,
Liquid Eye Protection: Safety glasses or goggles.
Dry Chemical.
Product Use: To promote adhesion on Protective Gloves: Safety work gloves
Special Fire Fighting Procedures: Wear
Sando-Seal waterproofing membranes.
NIOSH/ MSHA. Other Protective Equipment: Eye bath and
Toxic Substances Control Act (TSCA): This safety shower.
Unusual Fire and Explosion Hazards: None
product and/or all the ingredients contained in
Work/Hygienic Practices: Wash hands before
this product have been registered under the
eating or using restroom. Smoke only in
Toxic Substances Control Act. SECTION 4 appropriate areas.
Hazardous Ingredients/ Identity: Menthol REACTIVITY HAZARD DATA
<10% By Weight Stability: Stable
SECTION 7
OSHA PEL: 220 PPM Conditions/Contributions to Instability: None PRECAUTIONS FOR SAFE HANDLING
ACGIH TLV: CAS # 6756-1 Incompatibility (Materials to Avoid): Isolate AND USE/LEAK PROCEDURES
from Oxidizers.
Steps to be Taken in Case Material is
SECTION 2 Hazardous Decomposition Products (Includ- Released or Spilled: Remove all sources of
ing Combustion Products): May yield carbon
PHYSICAL/CHEMICAL ignition, ventilate areas, remove with inert
oxides and toxic monomer fumes.
CHARACTERISTICS absorbent and non-sparking tools.
Boiling/Melting Point: 212掳F (100掳C) Waste Disposal Method: Incinerate under
safe conditions or dispose in accordance with
SECTION 5
Specific Gravity: 0.987 (H2O = 1)
state, local and federal regulations.
HEALTH HAZARD DATA
Vapor Density (Air = 1): As water
Precautions to be Taken in Handling and
Medical Conditions Generally Aggravated
Evaporation Rate: Slower than Ether Storage: Do not breathe vapors, use adequate
by Exposure: Pre-existing eye, skin, or res-
Vapor Pressure MMHG: As water ventilation. Do not take internally. Do not get in
piratory disorders may be aggravated by
eyes. Wear impervious clothing. Keep away
pH: N/A exposure.
from heat and flame.
Percent Volatile by Volume (%): 62 by weight Emergency and First Aid Procedures:
Other Precautions: Never use welding or
Eye Contact: Flush with water for at least 15
Solubility in Water: Dispersible cutting torch on or near container because
minutes lifting lids, call physician.
Evaporation Rate: As water (Butyl acetate = 1) product can ignite explosively.
Skin Contact: Wash with soap and water.
Appearance and Odor: White liquid with mild
Inhalation: Remove to fresh air, apply artificial
musty odor.
respirator if necessary, call physician.
Threshold Limit Value: Not established.
|