Sandell Manufacturing Company, Inc.
Sandell
www.sandellmfg.com e-mail: moreinfo@sandellmfg.com
Trowel Mastic
CORPORATE OFFICE BRANCH OFFICE
310 Wayto Rd. 鈥? Schenectady, NY 12303 1700 Vanderbilt Rd. 鈥? Birmingham, AL 35234
Phone: (518) 357-9757 Phone: (205) 263-1030
MATERIAL SAFETY DATA SHEET
1 (800) 283-3888 鈥? Fax: (518) 357-9636 1 (877) SANDELL 鈥? Fax: (205) 263-1033
SECTION 1 SECTION 4 SECTION 6
MATERIAL IDENTIFICATION REACTIVITY HAZARD DATA CONTROL AND PROTECTIVE
INFORMATION MEASURES
Stability: Stable
Hazardous Components Respirator Protection: Respirator in confined
Conditions to Avoid: Extreme heat, open flame.
Occupational Exposure Limits: area.
Incompatibility (Materials to Avoid): Isolate
Asphalt (Case #8052-42-4) Ventilation: Local exhaust recommended.
from oxidizers, heat and open flame.
OSHA PEL: 5MG/M3; ACGIS TLV: 5 MG/M3 Protective Gloves: Safety work gloves.
Hazardous Decomposition Products: May
Mineral Spirits (Case #8032-32-4) produce noxious fumes when heated to decom- Eye Protection: Safety glasses or goggles.
OSHA PEL: 100 PPM; ACGIS TLV: 5 MG/M3 position. Fumes may contain carbon monoxide. Other Protective Clothing or Equipment: Eye
Chrysotile Asbestos (Case #1332-21-4) Hazardous Polymerization: Will not occur. bath and safety shower.
OSHA PEL: 2F/CC; ACGIS TLV: N/A
Work/Hygienic Practices: Wash hands before
Slate Flour (Case #1344-36-1) eating or using restroom. Smoke only in
SECTION 5
No Toxic chemical subject to the reporting approved areas.
HEALTH HAZARD DATA
requirements of section 313 of Title III and of
Inhalation Health Risks and Symptoms
40 CPR 373 are present.
SECTION 7
of Exposure: Excessive inhalation of vapors
can cause nasal or respiratory irritation, PRECAUTIONS FOR SAFE HANDLING
SECTION 2 dizziness, nausea, headache, and possible AND USE/LEAK PROCEDURES
unconsciousness.
PHYSICAL/CHEMICAL Steps to be Taken in Case Material is
CHARACTERISTICS Skin and Eye Contact Health Risks and Released or Spilled: Remove all sources of
Symptoms of Exposure: Can cause severe
Boiling Point: 315掳F to 900掳F (157掳C to 482掳C) ignition, ventilate areas, remove with inert
irritation, redness, tearing, blurred vision. absorbent and non-sparking tools.
Specific Gravity (H2O = 1): 1.0
Ingestion Health Risk and Symptoms of Waste Disposal Method: Incinerate under safe
Vapor Density: Heavier than Air Exposure: Can cause gastrointestinal irritation, condition or dispose in accordance with the
Vapor Pressure: 68掳F (20掳C) nausea, vomiting, and diarrhea. local, state, and federal regulations.
Evaporation Rate: Slower than Ether Health Hazards (Acute & Chronic): Acute: Precautions to be Taken in Handling and
headaches, dizziness, nausea, irritation;
Solubility in Water: Negligible Storage: Do not breathe vapors, use adequate
Chronic: loss of appetite, nose bleeds. ventilation. Do not take internally. Do not get in
Appearance and Odor: Black paste, mild
eyes. Wear impervious clothing. Keep away
Medical Condition Generally Aggravated by
solvent odor.
from heat and flame.
Exposure: Pre-existing eye, skin, or respira-
tory disorders may be aggravated by exposure. Other Precautions: Never use welding or
SECTION 3 cutting torch on or near container because
Emergency and First Aid Procedures:
FIRE AND EXPLOSION HAZARD DATA product can ignite explosively.
Eye Contact: Flush with water for at least 15
Flash Point: 107掳F (42掳C) minutes lifting lids, call physician.
Method Used: PMCC Skin Contact: Wash with soap and water.
Flammability Limits in Air Volume: Lower: Inhalation: Remove to fresh air, apply artificial
1.0%; Upper 6.0% respirator if necessary, call physician.
Extinguishing Media: Foam, CO2, dry chemi-
cal, water fog
Special Fire Fighting Procedures: Wear self-
contained breathing apparatus, water may be
unsuitable except as a cooling medium.
Unusual Fire and Explosion Hazards: Keep
containers tightly closed, isolated from heat,
sparks and open flame. Closed containers may
explode when exposed to extreme heat.
|