Technical Bulletin
XTJ-435 Chemical Intermediate
XTJ-435 chemical intermediate is a relatively hydrophobic monoamine of about 325 molecular weight
derived from a propylene oxide adduct of a C12-14 alcohol.
APPLICATIONS 鈥? Chemical intermediate
BENEFITS 鈥? Higher hydrophobicity for use in oil- and solvent- based formulations
鈥? Amine end group more reactive than alcohol
鈥? Colorless, low viscosity liquid at ambient temperatures
SALES SPECIFICATIONS
Property Specifications Test Method*
Appearance Colorless to pale yellow liquid ST-30.1
with a slight haze
Color, Pt-Co 100 max. ST-30.12
Total acetylatables, meq/g 3.02 鈥? 3.21 ST-31.39
Total amine, meq/g 2.80 鈥? 3.20 ST-5.22
Primary amine, % of total amine 96 min. ST-5.34
Water, wt. % 0.5 max. ST-31.53
*Methods of Test are available from Huntsman Corporation upon request.
ADDITIONAL INFORMATION
Regulatory Information Typical Physical Properties
DOT/TDG Classification See MSDS AHEW (amine hydrogen equivalent wt.), g/eq 157
HMIS Code 3-1-0 Molecular weight 325
CAS Number Proprietary Flash point, COC, 掳C (掳F) 355 (671)
Density, g/ml (lb/gal), 25oC
US, TSCA SNUR** 0.907 (7.56)
Viscosity, cSt, 20oC
Canadian WHMIS Classification Not Determined 15.4
38oC
Canada, DSL Not Determined 7.8
66oC
Not Listed 7.01
European Union, EINECS/ELINCS
Australia, AICS Not Listed pH, 1% solution 11
Pour point, oC (oF)
Japan, ENCS Not Listed -17 (2)
Korea, ECL Not Listed HLB value 1
China, IECSC Not Listed Vapor pressure, mm Hg/ 205掳C 15.4
TOXICITY AND SAFETY
For additional information on the toxicity and safe handling of this product, consult the Material Safety Data Sheet
(Safety Data Sheet in Europe) prior to use of this product.
HANDLING AND STORAGE
Materials of Construction
At temperatures of 75-100掳F (34-38oC)
Tanks Carbon steel
Lines, valves Carbon steel
Pumps Carbon steel
Heat exchange Surfaces Stainless steel
Stainless steel, polyethylene, polypropylene, and TEFLON庐1
Hoses
Polypropylene or TEFLON庐1 (elastomers such as neoprene, Buna N, and
Gaskets, packing
VITON庐1 should be avoided)
Atmosphere Nitrogen or dry air
At temperatures above 100掳F (38oC)
Tanks Stainless steel or aluminum
Lines, Valves Stainless steel
Pumps Stainless steel or Carpenter 20 equivalent
Atmosphere Nitrogen
1
Registered trademark of Dupont
XTJ-435 chemical intermediate may be stored under air at ambient temperatures for extended periods. A nitrogen
blanket is suggested for all storage, however, to reduce the effect of accidental exposure to high temperatures and
to reduce the absorption of atmospheric moisture and carbon dioxide. It should be noted that pronounced
discoloration is likely to occur at temperatures above 140掳F (60oC), whatever the gaseous pad.
Cleanout of lines and equipment containing XTJ-435 chemical intermediate can be accomplished using warm
water and steam. In the event of spillage of this product, the area may be flushed with water. The proper method
for disposal of waste material is by incineration with strict observance of all federal, state, and local regulations.
AVAILABILITY
Samples are available in North America and Asia by contacting our sample department at 1-800-662-0924.
Samples in other locations, including Europe, are available by contacting any Huntsman Corporation sales office.
**OTHER IMPORTANT INFORMATION
On January 22, 1998, the US EPA issued a proposed rule promulgating Significant New Use Rules (SNURs)
under Section 5(a)2 of the Toxic Substance Control Act (TSCA) for a number of new products, including XTJ-435
chemical intermediate (63 FR 3394). In this SNUR, manufacture and used of our product, identified as PMN
Number P-96-1430 and further referenced under 40 CFR 721.641, is restricted solely to use as a chemical
intermediate. Under the terms of the SNUR, no other industrial, commercial or consumer activities are permitted
by EPA for XTJ-435 chemical intermediate. In compliance with this regulatory citation, Huntsman offers
XTJ-435 chemical intermediate to our customer for use only as a chemical intermediate.
5228-0208
Copyright 漏 2006, 2008 Huntsman Corporation or an affiliate thereof. All rights reserved.
Huntsman Corporation warrants only that its products meet the specifications stated herein (if any). Typical properties, where stated, are to be considered as representative of current production and should not be treated as specifications.
While all the information presented in this document is believed to be reliable and to represent the best available data on these products, HUNTSMAN MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF ANY THIRD PARTY, OR
WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND ANY USER OF PRODUCTS DESCRIBED HEREIN SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH
THE SUITABILITY OF ANY PRODUCT FOR ITS INTENDED USE AND ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION
WITH OTHER SUBSTANCES. Product(s) described in this publication may be hazardous and/or toxic and require special precautions in handling. For all product(s) described herein, the user should obtain from Huntsman detailed
information on hazards and/or toxicity, together with proper shipping, handling, and storage procedures, and should comply with all applicable safety and environmental standards. The behavior, hazards and/or toxicity of the product(s)
referred to in this publication in manufacturing processes and their suitability in any given end-use environment are dependent upon various conditions such as chemical compatibility, temperature, and other variables, which may not be
known to Huntsman. It is the sole responsibility of the user of such product(s) to evaluate the manufacturing circumstances and the final product(s) under actual end-use requirements and to adequately advise and warn future purchasers
and users thereof.
Main Offices US: Huntsman Corporation / 10003 Woodloch Forest Drive / The Woodlands, Texas 77380 / 281-719-6000
Technical Service US: 8600 Gosling Road / The Woodlands, Texas 77381 / 281-719-7780
Main Offices Europe: Huntsman Belgium BVBA / Everslaan 45 / B-3078 Everberg, Belgium / 32-2 -758-9211
Technical Service Europe: Technical Services Representative / Everberg Office / 32-2-758-9392
Main Offices Asia Pacific: Huntsman Singapore PTE / 150 Beach Road #37-00 Gateway West / Singapore 189720 / 65 6297 3363
Technical Service Asia Pacific: Huntsman Performance Products / 61 Market Road, Brooklyn, Victoria / Australia 3012 / 61 3 9933 6666
www.huntsman.com
|