MSDS MD 20.doc
Material Safety Data Sheet Aqua Mate 85
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
2. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Manufacturer: Chemlogis
P.O. Box 3330
Tualatin, OR 97062
Information Phone: (800) 453-7627
For Medical and Chemical Emergencies
Call INFOTRAC at: 800-535-5053
PRODUCT NAME: Aqua Mate 85
PRODUCT NUMBER: AM 85
MSDS NUMBER: MSDS-00422
DATE PREPARED: 10/5/98
LAST REVISION: 5/4/00
SYNONYMS: APC Dry, MD-20
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS OSHA PEL ACGIH TLV Weight %
Sodium Silicate 6834920 N/A N/A < 20
Sodium Carbonate 497198 N/A N/A < 70
3. HAZARDOUS IDENTIFICATION
Emergency Overview: N/A
Potential Health Effects
Eye Contact: May cause irritation or damage to the eyes
Inhalation: Irritating to the nose, throat, and respiratory tract
Ingestion: May irritate or burn mouth and throat
Skin Contact: Prolonged exposure may cause skin irritation
Signs and Symptoms
of Exposure: Irritation, pain, coughing and redness of skin
4. FIRST AID MEASURES
Eye Contact: Immediately flush eyes with water for at least 15 minutes. Hold
eyelids open while flushing the eyes. Get medical attention
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen. Get medical attention
immediately.
Ingestion: If swallowed, dilute with water and get medical attention. Never
Give anything by mouth to an unconscious or convulsing person.
Aqua Mate 85
MSDS MD 20.doc
Skin Contact: Wash with soap and water. Change contaminated clothing. Get
medical attention if irritation develops or persists.
Aggravated Medical Conditions:
Pre-existing skin or respiratory conditions
Supplemental Health Information:
The effects of long-term, low-level exposure to this product have not been determined. Safe
handling of this material on a long-term basis should emphasize the avoidance of all effects
from repetitive acute exposures.
5. FIRE FIGHTING MEASURES
Flammable Properties
Flash Point: N/A Flash Point Method Used: N/A
Autoignition: N/A LEL: UEL:
Extinguishing Media:
Use extinguishing media appropriate for surrounding fire
Special Fire Fighting Procedures:
Firefighters should wear proper protective equipment and self-contained breathing apparatus
with full facepiece in positive pressure mode. Move containers from fire area if it can be done
without risk. Use water to keep fire-exposed containers cool.
Unusual Fire and Explosion Hazards:
None Known
Combustion Products:
N/A
6. ACCIDENTAL RELEASE MEASURES
Steps to be taken in case material is spilled or released:
Keep dry. Recover with a shovel and store in an appropriate container.
7. HANDLING AND STORAGE
Precautions to be taken in Handling and Storage:
Follow all MSDS / Label precautions even after container is emptied because it may retain
product residues.
Other Precautions:
For industrial use only. Keep away from children. Keep containers closed while not in use.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Personal Protective Equipment:
Respiratory Protection: Wear a NIOSH/MSHA approved respirator appropriate for dust
at point of use
Protective Gloves: Rubber or other impervious material with gauntlets
Aqua Mate 85
MSDS MD 20.doc
Ventilation: Local exhaust sufficient to keep exposure below TLV
Work / Hygienic Practices:Use good personal hygiene when handling this product. Wash
hands after use, before smoking or using the toilet
Engineering Controls: N/A
Eye Protection: Safety glasses with side shields (or goggles)
Exposure Guidelines: Facilities storing or utilizing this material should be equipped with
an eyewash facility and a safety shower
Other Protective Equip: Boots, apron, lab coat or coveralls of impervious material, safety
shower, eyewash
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Appearance and Odor: Free flowing blue crystals. Slight odor
Solubility in Water: Complete
Boiling Point: N/A PH: N/A
Vapor Pressure: N/A Vapor Density: N/A
Specific Gravity: N/A Pounds Per Gallon: N/A
Melting Point: N/A Other Properties: N/A
10. STABILITY AND REACTIVITY
Stable: Stable
Conditions to Avoid: None known
Incompatibility: Strong acidic and strong oxidizing compounds
Hazardous Decomposition Oxides of carbon
or by-products:
Hazardous Polymerization: Will not occur
Conditions to avoid: None known
11. TOXICOLOGICAL INFORMATION
N/A
12. ECOLOGICAL INFORMATION
N/A
13. DISPOSAL CONSIDERATIONS
Consult appropriate Federal, State or Local regulatory agencies to ascertain proper disposal
procedures
14. TRANSPORT INFORMATION
DOT Class Non-Regulated Material, Solid
Hazard Class N/A
UN Number N/A
Packing Group N/A
Guide Number N/A
Proper Shipping Name Non-Regulated Material, Solid
Aqua Mate 85
MSDS MD 20.doc
15. REGULATORY INFORMATION
No information available
16. OTHER INFORMATION
HMIS Information: Health: 1 Flammability: 0 Reactive: 0 Protective: E
NFPA Information: Toxicity: 1 Fire: 0 Reactivity: 0 Special: N
Chemlogis expressly disclaims all express or implied warranties of merchantability and
fitness for a particular purpose, with respect to the product or information provided
herein. All information appearing herein is based upon data obtained from the
manufacturer and/or recognized technical sources. While the information is believed to be
accurate, Chemlogis makes no representations as to its accuracy or sufficiency.
Conditions of use are beyond Hydro Blast, Inc.鈥? control and therefore users are
responsible to verify this data under their particular purposes and they assume all risks of
their use, handling, and disposal of the product, or from the publication of use of, or
reliance upon, information contained herein. This information relates only to the product
designated herein, and does not relate to its use in combination with any other material or
in any other process.
Aqua Mate 85
|