MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel FS / Anchor Fix 3 - Part B
HMIS
HEALTH 3
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 01/03/2006
Product Name: Sikadur Injection Gel FS / Anchor Fix 3 - Part B
CAS Number: Not Established
Chemical Family: Amine Compound
Chemical Formula: RMF-2913
MSDS Number: 3802
Product Code: 078614G
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
BENZYL ALCOHOL 100-51-6
CALCIUM CARBONATE 471-34-1
NONYL PHENOL 84852-15-3
PHENOL 108-95-2 5-9
PROPRIETARY BLEND OF ALIPHATIC AMINES Trade Secret
TALC 14807-96-6
Note: Exposure to Calcium Carbonate and Talc is applicable only if cured with Part "A" and sanded.
3. Hazards Identification
Eye Hazards
Causes eye irritation. Causes irreversible eye damage.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel FS / Anchor Fix 3 - Part B
3. Hazards Identification - Continued
Skin Hazards
Causes skin irritation. Causes irreversible skin damage.
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation. May cause respiratory tract irritation.
4. First Aid Measures
Eye
In case of contact, immediately flush eyes with plenty of water. Get medical attention immediately if irritation
develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of water. Get medical attention immediately if
irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
Exposure to heat builds up pressure in closed containers.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel FS / Anchor Fix 3 - Part B
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limtis are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Ingredient(s) - Exposure Limits
CALCIUM CARBONATE
ACGIH TLV-TWA 10 mg/m3
OSHA PEL-TWA 15 mg/m3
OSHA PEL-TWA 5 mg/m3
NONYL PHENOL
EXPOSURE LIMITS NOT ESTABLISHED
NTP - NOT LISTED
IARC - NOT LISTED
PHENOL
ACGIH TLV-TWA 5 ppm (Skin)
OSHA PEL-TWA 5 ppm (Skin)
TALC
ACGIH TLV-TWA 2 mg/m3
OSHA PEL-TWA 20 mppcf
9. Physical And Chemical Properties
Appearance
Gray Liquid
Odor
Amine Odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 1.54
Percent Volatiles: N/AV
Packing Density: 13.0 pounds / gallon
Vapor Pressure: N/AV
Vapor Density: >AIR
Solubility: N/AV
Evaporation Rate: Slower than ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel FS / Anchor Fix 3 - Part B
10. Stability And Reactivity - Continued
Conditions To Avoid (Stability)
None Identified
Incompatible Materials
Strong Acids and Oxidizing Agents.
Hazardous Decomposition Products
Nitrogen Oxides, CO, CO2
Conditions To Avoid (Polymerization)
Exotherm when curing in mass.
11. Toxicological Information
Ingredient(s) - Carginogenicity
TALC
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
Not regulated by USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
PHENOL (108-95-2) 5 - 9 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
PHENOL
SARA Title III - EPA Part 355 Extremely Hazardous Substance
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel FS / Anchor Fix 3 - Part B
15. Regulatory Information - Continued
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
CALCIUM CARBONATE
Pennsylvania - Workplace Hazard
PHENOL
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
California - CalARP Table 3 Regulated Substance
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
TALC
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 3
F i re : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
This MSDS Supercedes A Previous MSDS Dated: 04/14/2003
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other materialor in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|