Material Safety Data Sheet chemusa
Section I. Chemical Product and Company Identification
庐
Product Name/ MOLYVAN 807 29130
Code
Trade Name
Mixture
CAS#
Supplier R.T. VANDERBILT COMPANY, INC.
In Case of Call: (203) 853-1400
30 WINFIELD STREET Emergency
NORWALK, CT 06855
molybendum, bis (C11-14 branched and linear alkyl)
Synonym
carbamodithioate oxo thioxo complexes
Not applicable.
Chemical name
Not available.
Chemical Family
Chemical Formula Not applicable.
Industrial applications: Friction reducer. Antioxidant.
Material Uses
TSCA 8(b) inventory: MOLYVAN庐 807
TSCA Status
This MSDS is for USA and Canada Only - This product is registered outside USA and Canada as CAS#
71342-89-7 in EU, Japan, China, Korea, Philippines, Australia. If you have any questions please call Product
Risk Manager at R.T. Vanderbilt Company, Inc.
Section II. Composition and Information on Ingredients
Name CAS # % by Weight
molybdenum, bis(C11-14 branched and linear alkyl) carbamodithioate 906665-74-5 50
oxo thioxo complexes
petroleum process oil, <3.0% DMSO extractable material 64742-52-5 50
Section III. Hazards Identification
Dark green liquid. May be harmful if inhaled. May cause eye and/or skin irritation.
Emergency Overview
Section IV. First Aid Measures
Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Eye Contact
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient.
Skin Contact
Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before
reuse. Get medical attention.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Inhalation
Get medical attention.
Do not induce vomiting. Immediately give two glasses of water, a little at a time. Never give anything by
Ingestion
mouth to an unconscious person. Call a physician. If vomiting occurs spontaneously, lower head below waist
to prevent fluid from entering the lungs.
Continued on Next Page
MOLYVAN庐 807 Page Number: 2
Section V. Fire and Explosion Data
Non-flammable.
Flammability of the Product
Not available.
Autoignition Temperature
CLOSED CUP: 160掳C (320掳F). (Pensky-Martens.)
Flash Point
Not available.
Flammable Limits
Not available.
Products of Combustion
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
of Various Substances
SMALL FIRE: Use DRY chemical powder.
Fire Fighting Media
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
and Instructions
Not available.
Special Remarks on Fire
Hazards
Special Remarks on Explosion Not available.
Hazards
Section VI. Accidental Release Measures
Absorb with an inert material and put the spilled material in an appropriate waste disposal
Small Spill
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Be careful that the
Large Spill
product is not present at a concentration level above TLV. Check TLV on the MSDS and with local
authorities. Finish cleaning by spreading water on the contaminated surface and dispose of according to
local and regional authority requirements.
Section VII. Handling and Storage
Keep container tightly closed. Keep container in a cool, well-ventilated area.
Storage
Avoid contact with skin and eyes. Avoid breathing vapors or spray mists. After handling, always wash hands
Handling Procedures and
thoroughly with soap and water. This product has a tendency upon standing to exhibit some crystallization or
Equipment
gelling. If this happens, the product may be re-liquified by agitation and heating at 40 to 50掳C.
Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below
Engineering Controls
their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the
work-station location.
Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent.
Personal Protection
Gloves.
petroleum process oil, <3.0% DMSO extractable material
TLV / PEL
TWA: 5 (mg/m3) from OSHA (PEL) [US]
TWA: 5 STEL: 10 (mg/m3) from ACGIH (TLV) [US]
Consult local authorities for acceptable exposure limits.
Continued on Next Page
MOLYVAN庐 807 Page Number: 3
Section IX. Physical and Chemical Properties
Green. (Dark.) Liquid.
Appearance
Not applicable.
Molecular Weight
Not applicable.
pH (1% soln/water)
Not available.
Boiling/Condensation Point
Not available.
Melting Point
0.97 (Water =1) at 15.6掳 C.
Specific Gravity
Not available.
Density
The highest known value is <0 kPa (@ 20掳C) (petroleum process oil, <3.0% DMSO extractable material).
Vapor Pressure
The highest known value is 5 (Air = 1) (petroleum process oil, <3.0% DMSO extractable material).
Vapor Density
TGA onset temperature = 215掳 C.
Volatility
Not available.
Odor
0.01 (petroleum process oil, <3.0% DMSO extractable material) compared to Butyl acetate.
Evaporation Rate
651 cSt at 25掳 C; 13 cSt at 100掳 C.
Viscosity
Not available.
Water/Oil Dist. Coeff.
Insoluble in cold water. Soluble in petroleum products.
Solubility
Section X. Stability and Reactivity Data
The product is stable.
Stability
Not available.
Instability Temperature
Not available.
Conditions of Instability
Reactive with oxidizing agents.
Incompatibility with Various
Substances
Not available.
Corrosivity
Special Remarks on Reactivity Not available.
Section XI. Toxicological Information
Eye contact. Inhalation. Skin contact.
Routes of Entry
Acute dermal toxicity (LD50): >2000 mg/kg [Rabbit]. (petroleum process oil, <3.0% DMSO extractable
Toxicity to Animals
material).
Special Remarks on Toxicity to Not available.
Animals
Acute Effects
This product may irritate eyes upon contact.
Eye Contact
This product may irritate skin upon contact.
Skin Contact
No data available.
Sensitization
Slight ingestion hazard.
Ingestion
May be harmful if inhaled
Inhalation
Continued on Next Page
MOLYVAN庐 807 Page Number: 4
Not available.
Remarks
CARCINOGENIC EFFECTS Not available.
:
Chronic Effects on
MUTAGENIC EFFECTS Not available.
:
Humans
TERATOGENIC EFFECTS Not available.
:
DEVELOPMENTAL TOXICITY Not available.
:
Not available.
Remarks
Section XII. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD and COD
Possibly hazardous short term degradation products are not likely. However, long term degradation products
Products of Biodegradation
may arise.
Not available.
Biodegradability
Not available.
Special Remarks on the
Products of Biodegradation
Section XIII. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Waste Information
Not available.
Waste Stream
Section XIV. Transport Information
Not a DOT controlled material (United States).
DOT
Not applicable.
Remarks
Not available.
Maritime transportation
Section XV. Other Regulatory Information and Pictograms
Not controlled under the HCS (United States).
Classification HCS (USA)
TSCA 8(b) inventory: MOLYVAN庐 807
Federal and State
SARA 311/312 MSDS distribution - chemical inventory - hazard identification:
Regulations
petroleum process oil, <3.0% DMSO extractable material: fire
Not applicable.
Remarks
Continued on Next Page
MOLYVAN庐 807 Page Number: 5
National Fire Protection
Hazardous Material Flammability
1
2
Health Hazard
Association (U.S.A.)
Information System
1 2 0
Fire Hazard Reactivity
(U.S.A.) Health
0
Physical Hazard
Specific hazard
h
Personal Protection
Other regulatory
specifications
CEPA DSL: MOLYVAN庐 807
Protective Clothing
(Pictograms)
Section XVI. Other Information
Not available.
References
Not available.
Other Special
Considerations
Validated by Romana Uzar on 6/21/2007. Verified by Romana Uzar.
Previous Validation Date: 2/15/2007. Printed 6/21/2007.
Information Contact (203) 853-1400
Corporate Risk Management Department
Notice to Reader
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge
and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any patent or
in violation of any law or regulation. It is the user鈥檚 responsibility to determine for himself the suitability of any material for a specific purpose and to
adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions
of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.
|