Material Safety Data Sheet chemcan
Section I. Chemical Product and Company Identification
MOLYVAN L
庐
Product Name/ Code 29105
Trade Name
72030-25-2
CAS#
Supplier R.T. VANDERBILT COMPANY, INC.
In case of Call (203)853-1400
30 WINFIELD STREET Emergency
NORWALK, CT 06855
Molybdenum di(2-ethylhexyl)phosphorodithioate in petroleum
Synonym
process oil.
Molybdenum,bis {O,O-bis (2-ethylhexyl) phosphorodithioate-S,S'}
Chemical Name
dioxodi-u-thioxodi
(Petrochemical.)
Chemical Family
C32H68Mo2O6P2S6
Chemical Formula
Material Uses Industrial applications: Friction reducer.
Extreme-pressure and antiwear agent.
Section II. Composition and Information on Ingredients
Name CAS # % by
Weight
molybdenum di(2-ethylhexyl)phosphorodithioate 72030-25-2 75
petroleum process oil, <3.0% DMSO extractable materia 64742-52-5 25
Section III. Hazards Identification
Dark green liquid. Inhalation of mist or vapor may be harmful. May cause skin and eye irritation.
Emergency Overview
Section IV. First Aid Measures
Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Eye Contact
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated
Skin Contact
skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and
groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash
contaminated clothing before reusing.
Allow the victim to rest in a well ventilated area. Seek immediate medical attention
Inhalation
Do not induce vomiting. Immediately give two glasses of water, a little at a time. Never give anything by
Ingestion
mouth to an unconscious person. Call a physician. If vomiting occurs spontaneously, lower head below waist
to prevent fluid from entering the lungs.
Continued on Next Page
MOLYVAN庐 L Page Number: 2
Section V. Fire and Explosion Data
Not available.
Flammability of the Product
Not available.
Auto-Ignition Temperature
CLOSED CUP: 139掳C (282.2掳F). (Pensky-Martens.)
Flash Points
Not available.
Flammable Limits
Oxides of molybdenum, carbon, sulfur and phosphorus.
Products of Combustion
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
of Various Substances
SMALL FIRE: Use DRY chemical powder.
Fire Fighting Media
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
and Instructions
Not available.
Special Remarks on
Fire Hazards
Special Remarks on Explosion Not available.
Hazards
Section VI. Accidental Release Measures
Absorb with an inert material and put the spilled material in an appropriate waste disposal
Small Spill
Keep away from heat. Eliminate all sources of ignition. Stop leak if without risk. Finish cleaning by spreading
Large Spill
water on the contaminated surface and dispose of according to local and regional authority requirements
Section VII. Handling and Storage
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly
Storage
closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme
heat and away from strong oxidizing agents.
Manipulate in a well-ventilated area. Avoid breathing vapors or spray mists. Avoid contact with skin and
Handling Procedures and
eyes. After handling, always wash hands thoroughly with soap and water.
Equipment
Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below
Engineering Controls
their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the
work-station location.
Splash goggles. Lab coat. Gloves (impervious).
Personal Protection
molybdenum di(2-ethylhexyl)phosphorodithioate
TLV/PEL
TWA: 15 (mg/m3) from OSHA (PEL)
TWA: 10 (mg/m3) from ACGIH (TLV)
petroleum process oil
US: TWA: 5 (mg/m3) from OSHA (PEL)
US: TWA: 5 STEL: 10 (mg/m3) from ACGIH (TLV)
Consult local authorities for acceptable exposure limits.
Continued on Next Page
MOLYVAN庐 L Page Number: 3
Section IX. Physical and Chemical Properties
Green. (Dark.) Liquid.
Appearance
995.11
Molecular Weight
Not applicable.
pH (1% soln/water)
Not available.
Boiling/Condensation Point
Not available.
Melting/Sublimation Point
1.08 (Water = 1)
Specific Gravity
Not available.
Density
The highest known value is <0.01 mm of Hg (@ 20掳C) (petroleum process oil).
Vapor Pressure
The highest known value is 5 (Air = 1) (petroleum process oil).
Vapor Density
Volatility Not available.
Odor / Odor Threshold Not available.
Evaporation rate 0.01 (petroleum process oil) compared to Butyl acetate.
176 cSt @ 25掳C
Viscosity
Not available.
Water/Oil Dist. Coeff.
Solubility Insoluble in cold water. Soluble in petroleum oils and hydrocarbon solvents.
Section X. Stability and Reactivity Data
The product is stable.
Stability
Not available.
Instability Temperature
Not available.
Conditions of Instability
Slightly reactive to reactive with oxidizing agents
Incompatibility with
Various Substances
Not available.
Corrosivity
Special Remarks on Reactivity Not available.
Section XI. Toxicological Information
Absorbed through skin. Dermal contact. Eye contact. Inhalation. Ingestion
Routes of Entry
Acute oral toxicity (LD50): 7350 mg/kg [Rat].
Toxicity to Animals
Acute dermal toxicity (LD50): 10800 mg/kg [Rabbit]
Not available.
Special Remarks on
Toxicity to Animals
Acute Effects
May cause eye irritation. Caused mild to moderate conjunctivitis in rabbit eyes.
Eye contact
May cause skin irritation. Erythema could not be evaluated due to green staining of skin.
Skin contact
Not available.
Sensitization
May be a slight ingestion hazard.
Ingestion
Continued on Next Page
MOLYVAN庐 L Page Number: 4
Inhalation of the mist or vapor may be harmful.
Inhalation
Not available.
Remark
CARCINOGENIC EFFECTS Not available.
:
Chronic Effects on
MUTAGENIC EFFECTS Not available.
:
Humans
TERATOGENIC EFFECTS Not available.
:
DEVELOPMENTAL TOXICITY Not available.
:
Not available.
Remarks
Section XII. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD5 and COD
None known.
Products of Biodegradation
Not available.
Biodegradability
Not available.
Special Remarks on the
Products of Biodegradation
Section XIII. Disposal Considerations
Not a US RCRA hazardous waste. Dispose of in accordance with state and local regulations.
Waste information
Not available.
Waste stream
Section XIV. Transport Information
Not controlled under TDG (Canada).
TDG Road/Rail
Not applicable.
Not applicable.
Remarks
Not available.
Maritime
Transportation
Continued on Next Page
MOLYVAN庐 L Page Number: 5
Section XV. Other Regulatory Information and Pictograms
Federal & Provincial
CEPA DSL: MOLYVAN庐 L
Regulations.
Not a WHMIS controlled material.
WHMIS (Canada)
Remark Not available.
Other regulatory lists TSCA 8(b) inventory: MOLYVAN庐 L
EINECS: This product is on the European Inventory of Existing Commercial Chemical
Substances.
Australia: MOLYVAN庐 L
Korea (TCCL): MOLYVAN庐 L
Philippines (RA6969): MOLYVAN庐 L
Japan (MITI): MOLYVAN庐 L
National Fire
2
Hazardous Material Health Hazard Flammability
1
Protection Association
Information System 1
Fire Hazard
2 0
(U.S.A.)
(U.S.A.) Reactivity
Health
0
Physical Hazard
h
Personal Protection Specific hazard
WHMIS (Canada)
(Pictograms)
Protective Clothing
(Pictograms)
Section XVI. Other Information
Not available.
References
Not available.
Other Special
Considerations
Validated by Alan Lopez on 5/7/2008. Verified by Alan Lopez.
Printed 5/7/2008.
Information Contact (203) 853-1400
Corporate Risk Management Department
Notice to Reader
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our
knowledge and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in
violation of any patent or in violation of any law or regulation. It is the user's responsibility to determine for himself the suitability of any
material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained
in using any material and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of
any material supplied by us.
|