Material Safety Data Sheet chemcan
Section I. Chemical Product and Company Identification
庐
Product Name/ Code
MOLYVAN 2000 31510
Trade Name
Mixture
CAS#
Supplier R.T. VANDERBILT COMPANY, INC.
In case of Call (203)853-1400
30 WINFIELD STREET Emergency
NORWALK, CT 06855
molybendum, bis (C11-14 branched and linear alkyl)
Synonym
carbamodithioate oxo thioxo complexes
Not applicable.
Chemical Name
Not available.
Chemical Family
Not applicable.
Chemical Formula
Material Uses Industrial applications: Friction reducer.
Section II. Composition and Information on Ingredients
Name CAS # % by
Weight
molybdenum, bis(C11-14 branched and linear alkyl) 906665-74-5 50
carbamodithioate oxo thioxo complexes
petroleum process oil, <3.0% DMSO extractable material 64742-52-5 50
Section III. Hazards Identification
Brown liquid. Inhalation may be harmful. May cause eye and skin irritation.
Emergency Overview
Section IV. First Aid Measures
Check for and remove any contact lenses. Flush with running water for at least 15 minutes. Get medical
Eye Contact
attention.
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient.
Skin Contact
Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before
reuse. Get medical attention.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Inhalation
Get medical attention.
Do not induce vomiting. Immediately give two glasses of water, a little at a time. Never give anything by
Ingestion
mouth to an unconscious person. Call a physician. If vomiting occurs spontaneously, lower head below waist
to prevent fluid from entering the lungs.
Continued on Next Page
MOLYVAN庐 2000 Page Number: 2
Section V. Fire and Explosion Data
Not available.
Flammability of the Product
Not available.
Auto-Ignition Temperature
CLOSED CUP: 153掳C (307.4掳F). (Pensky-Martens.)
Flash Points
Not available.
Flammable Limits
Compounds of molybdenum, sulfur, nitrogen and carbon.
Products of Combustion
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
of Various Substances
SMALL FIRE: Use DRY chemical powder.
Fire Fighting Media
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
and Instructions
Not available.
Special Remarks on
Fire Hazards
Special Remarks on Explosion Not available.
Hazards
Section VI. Accidental Release Measures
Absorb with an inert material and put the spilled material in an appropriate waste disposal
Small Spill
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by
Large Spill
spreading water on the contaminated surface and dispose of according to local and state regulations. Be
careful that the product is not present at a concentration level above TLV. Check Section XIII for disposal
information.
Section VII. Handling and Storage
Keep container tightly closed. Keep container in a cool, well-ventilated area.
Storage
Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. This product has a tendency
Handling Procedures and
upon standing to exhibit some crystallization or gelling. If this happens, the product may be re-liquified by
Equipment
agitation and heating at 40 to 50掳C.
Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below
Engineering Controls
their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the
work-station location.
Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent.
Personal Protection
Gloves.
petroleum process oil, <3.0% DMSO extractable material
TLV/PEL
TWA: 5 (mg/m3) from OSHA (PEL) [US]
TWA: 5 STEL: 10 (mg/m3) from ACGIH (TLV) [US]
Continued on Next Page
MOLYVAN庐 2000 Page Number: 3
Section IX. Physical and Chemical Properties
Brown. Liquid.
Appearance
Not applicable.
Molecular Weight
Not applicable.
pH (1% soln/water)
Not available.
Boiling/Condensation Point
Not available.
Melting/Sublimation Point
0.98-1.02 (Water = 1)
Specific Gravity
0.98-1.02 mg/m3 at 15.6掳C
Density
The highest known value is <0 kPa (@ 20掳C) (petroleum process oil, <3.0% DMSO extractable material).
Vapor Pressure
The highest known value is 5 (Air = 1) (petroleum process oil, <3.0% DMSO extractable material).
Vapor Density
Volatility TGA onset temperature = 240掳C (464掳F)
Odor / Odor Threshold Not available.
Evaporation rate 0.01 (petroleum process oil, <3.0% DMSO extractable material) compared to Butyl acetate.
651 cSt @ 25掳C ; 10-25 cSt @ 100掳C
Viscosity
Not available.
Water/Oil Dist. Coeff.
Solubility Insoluble in cold water. Soluble in petroleum and synthetic lubricant bases.
Section X. Stability and Reactivity Data
The product is stable.
Stability
Not available.
Instability Temperature
Not available.
Conditions of Instability
Reactive with oxidizing agents.
Incompatibility with
Various Substances
Not available.
Corrosivity
Special Remarks on Reactivity Not available.
Section XI. Toxicological Information
Inhalation. Ingestion.
Routes of Entry
Acute oral toxicity (LD50): >2000 mg/kg [Rat].
Toxicity to Animals
Not available.
Special Remarks on
Toxicity to Animals
Acute Effects
No data available. Product may cause irritation based on testing of similar materials.
Eye contact
No data available. Product may cause mild irritation based on testing of similar materials.
Skin contact
No data available.
Sensitization
Product may be a slight ingestion hazard based on animal data.
Ingestion
Continued on Next Page
MOLYVAN庐 2000 Page Number: 4
No data available. Product may cause irritation based on testing of similar materials.
Inhalation
Not available.
Remark
CARCINOGENIC EFFECTS Not available.
:
Chronic Effects on
MUTAGENIC EFFECTS Non-mutagenic for bacteria and/or yeast. [MOLYVAN庐 2000].
:
Humans
DEVELOPMENTAL TOXICITY Not available.
:
REPRODUCTIVE TOXICITY Not available.
:
Both molybdenum (insoluble) and oil mist (mineral) are believed to have a low order of toxicity. Molybdenum
Remarks
at high oral dosages has produced weight loss, anorexia, liver and kidney damage in animals but few signs
and symptoms in humans have been recorded during normal usage. Oil mists (unless contaminated with
endotoxins or high volatile organics) have produced few adverse effects. Mild decrements in lung function,
however, have more recently been reported with repeated elevated exposures.
Section XII. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD5 and COD
Possibly hazardous short term degradation products are not likely. However, long term degradation products
Products of Biodegradation
may arise.
Not available.
Biodegradability
Not available.
Special Remarks on the
Products of Biodegradation
Section XIII. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Waste information
Not available.
Waste stream
Section XIV. Transport Information
Not controlled under TDG (Canada).
TDG Road/Rail
Not applicable.
Not applicable.
Remarks
Not available.
Maritime
Transportation
Continued on Next Page
MOLYVAN庐 2000 Page Number: 5
Section XV. Other Regulatory Information and Pictograms
Federal & Provincial
CEPA DSL: MOLYVAN庐 2000
Regulations.
Not controlled under WHMIS (Canada).
WHMIS (Canada)
Remark Not available.
Other regulatory lists TSCA 8(b) inventory: MOLYVAN庐 2000
This MSDS is for USA and Canada Only - This
product is registered outside USA and Canada as
CAS# 71342-89-7 in EU, Japan, China, Korea,
Philippines, Australia. If you have any questions
please call Product Risk Manager at R.T. Vanderbilt
Company, Inc.
National Fire
2
Hazardous Material Health Hazard Flammability
1
Protection Association
Information System 1
Fire Hazard
2 0
(U.S.A.)
(U.S.A.) Reactivity
Health
0
Physical Hazard
h
Personal Protection Specific hazard
WHMIS (Canada)
(Pictograms)
Protective Clothing
(Pictograms)
Section XVI. Other Information
Not available.
References
Not available.
Other Special
Considerations
Validated by Romana Uzar on 6/21/2007. Verified by Romana Uzar.
Printed 6/21/2007.
Information Contact (203) 853-1400
Corporate Risk Management Department
Notice to Reader
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our
knowledge and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in
violation of any patent or in violation of any law or regulation. It is the user鈥檚 responsibility to determine for himself the suitability of any
material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained
in using any material and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of
any material supplied by us.
|