O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
1. Product and Company Identification
FNR5 Automatic Transmission Fluid
Product Name:
See Attachment
Product Code:
Automatic transmission fluid
Application:
Ford Motor Company
Supplier:
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Poison Control Center: 1-800-959-3673
Emergency Telephone:
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
72623-86-0
LUBRICATING OILS (PETROLEUM) 30-60 HAZCOM
C15-30 HYDROTREATED, RSMS_P_SOM
NEUTRAL OIL BASED
8042-47-5
WHITE MINERAL OIL 10-30 HAZCOM
72623-84-8
LUBRICATING OILS 10-30 HAZCOM
(PETROLEUM), C15-30,
HYDROTREATED NEUTRAL OIL-
BASED, CONTAINING SOLVENT
DEASPHALTED RESIDUAL OIL
64741-88-4
PETROLEUM DISTILLATES, 1-5 HAZCOM
SOLVENT-REFINED HEAVY RSMS_P_SOM
PARAFFINIC
64742-54-7
PETROLEUM DISTILLATES 1-5 HAZCOM
HYDROTREATED HEAVY RSMS_P_SOM
PARAFFINIC
3. Hazards Identification
Exposure to oil mist/fume/vapor may cause respiratory tract irritation.
Health:
Inhalation of mist and vapors may irritate the nose, throat, and lungs.
This product may cause irritation to the eyes.
This product may be harmful if it is swallowed.
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
This product is combustible at high temperatures.
Physical and Chemical Hazards:
4. First-Aid Measures
If gas/fume/vapor/dust/mist from the material is inhaled, remove the
Inhalation:
affected person immediately to fresh air.
If irritation persists, get medical attention.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
Immediately take off all contaminated clothing.
Skin Contact:
For skin contact, wash immediately with soap and water.
If irritation persists, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water for
Eye Contact:
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.
If the material is swallowed, do not induce vomiting. Get immediate
Ingestion:
medical attention or advice -- give several glasses of water or milk.
Never give anything by mouth to a victim who is unconscious or is
having convulsions.
If the affected person is not breathing, apply artificial respiration.
Notes to a Physician:
5. Fire-Fighting Measures
Dry chemical, foam, carbon dioxide.
Extinguishing Media:
Use water to cool fire-exposed containers, structures, and to protect
Specific Methods:
personnel.
Empty containers may retain product residue including Flammable or
Specific Hazards:
Explosive vapors. Do not cut, drill, grind, or weld near full, partially full,
or empty product containers.
Irritating and toxic gases or fumes may be released during a fire.
When heated to very high temperatures, the material may give off
smoke and decomposition products which may contain toxic
compounds such as sulfur and/or nitrogen oxides.
Fire fighters should be equipped with NIOSH-approved, self-contained
Protection of Firefighters:
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Avoid inhalation of vapors and contact with skin and eyes.
Personal Precautions:
Eliminate all sources of ignition or flammables that may come into
contact with a spill of this material.
Surfaces may become slippery after spillage.
Ventilate the contaminated area.
Wear appropriate protective equipment and clothing during clean-up.
Do not allow the spilled product to enter public drainage system or
Environmental Precautions:
open water courses.
Stop the flow of material, if this is without risk.
Methods for Cleaning Up:
Absorb the spilled material with an inert absorbent (nonflammable)
material.
Thoroughly wash the area after a spill or leak clean-up.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
7. Handling and Storage
Handling:
Avoid the generation of oil mists.
Technical Measures:
Keep this product from heat, sparks, or open flame.
Precautions and Advice for Safe Avoid prolonged or repeated skin contact with this material.
Elevated temperature or mechanical action may form vapors, mist, or
Handling:
fumes which may be irritating to the eyes, nose, throat, and lungs.
Avoid breathing vapors or mist.
No special precautions necessary.
Storage: Technical Measures:
Do not store near heat, spark or open flame.
Storage Conditions:
Do not store this material in open or unlabeled containers.
Store this product in a cool, dry, well-ventilated place.
8. Exposure Controls/Personal Protection
Use general ventilation.
Engineering Measures:
Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.
Eyewash and emergency showers are recommended.
If oil mist is generated, observe the OSHA exposure limit of 5 mg/m3.
Control Parameters:
Ford Motor Company recommends an exposure limit of 1.0 mg/m3.
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
Use of impervious gloves is recommended, such as neoprene.
Hand Protection:
Wear safety glasses with side shields.
Eye Protection:
Wear chemical goggles; face shield (if splashing is possible).
Remove contaminated clothing and wash before reuse.
Skin and Body Protection:
Wash thoroughly after handling.
Hygiene Measures:
When using this material, do not eat, drink or smoke.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
9. Physical and Chemical Properties
0.85 g/m鲁 @15掳C
Specific Gravity:
LIQUID
Physical State:
OILY
Form:
MILD
Odor:
RED
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
174 掳C COC
Flash Point:
Explosion Properties:
N.AV
UEL:
N.AV
LEL:
INSOLUBLE IN WATER
Solubility:
35.77@40掳C cSt ASTM D445
Viscosity:
N.AV
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
This product may react with strong oxidizing agents (bleach--sodium
Conditions and Materials to Avoid:
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).
Carbon monoxide, carbon dioxide, and other low molecular weight
Hazardous Decomposition Products:
hydrocarbons.
Decomposition of this product may emit oxides of sulfur.
Decomposition of this product may yield oxides of phosphorus.
11. Toxicological Information
The skin sensitization potential of this product has not been fully
Skin Contact:
assessed, assume that contact with the skin may cause allergic contact
dermatitis. Risks are higher where prolonged or repeated skin contact
with a fluid may occur.
Base oil severely refined: Not carcinogenic in animal studies.
Chronic (Long Term) Toxicity:
Representative material passes IP-346, Modified Ames test, and/or
other screening tests.
12. Ecological Information
No specific aquatic data available for this product.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No consideration given when disposed of according to local, state, and
Contaminated Packaging:
Federal regulations.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
Don't pollute. Conserve resources. Return used oil to collection centers.
This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372
The components of this product are listed on the TSCA Inventory
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
HMIS and NFPA Hazard Class Information:
Health: 1 (Slight) Flammability: 1 (Slight) Physical Hazard: 0 (Least)
HMIS Hazard Class:
Health: 0 (Least) Flammability: 1 (Slight) Instability: 0 (Least)
NFPA Hazard Class:
The following sections contain revisions OR 2
15
NEW statements.
The chemical identification and properties for this material were provided
Preparation Information:
by the manufacturer. For Canadian locations, a manufacture's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Diagnostic Service Center II, 1800
Fairlane Drive, Allen Park, MI 48101, USA.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
The information on this data sheet represents our current data and is
Disclaimer:
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
175125 Level: 1
FIR No.:
US-US-2 Release Date: 2008-06-02
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
XT-9-QMM5 1 qt. (946 mL)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 8 Official Record
Application: MATS
|