Part Number(s):
MATERIAL SAFETY DATA SHEET 52-608-00
Form WI04-11A Rev. 1
Product Name: Elan Plastic Primer Release Date: May 30, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Accu Bond Sealant A Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
1565-94-2 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components CLASSIFICATION C.A.S. Number Exposure Limits %
Bisphenol diglycidylmethacrylate Xi; R 36 / 38-43 1565-94-2 NA 15-40
Tetrahydrofurfuryl methacrylate 244-24-5 NA 15-40
Xi; R 36 / 38-43
Methyl methacrylate F;R11, Xi; R 36 / 38-43 80-62-6 NA 15-40
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Irritates the eyes. NA NA NA NA
Eye
May cause allergic NA NA NA NA
Skin
reaction on skin.
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush with running water for at Seek medical attention. NA
Eye
least 15 minutes while keeping eye
lids open.
Wash with soap and water. NA NA
Skin
Does not require first aid NA NA
Inhalation
measures.
Drink two glasses of water or milk. Call a physician if a substantial NA
Ingestion
amount has been ingested.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-608-00
Form WI04-11A Rev. 1
Product Name: Elan Plastic Primer Release Date: May 30, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
>38掳C / 掳F LEL: N/D UEL: N/D NA
Self ignition: N/D
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Dry chemical powder, foam, or carbon dioxide. NA
Protection and Procedures for Firefighters
NA
Unusual Fire and Explosion Hazards
Upon combustion irritating gases may form.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Wipe with damp paper towels, discard properly.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
This product is used exclusively for dental purposes by trained personnel.
Storage Practices and Warnings
(掳C / 掳F). Store in ventilated, dry, cool (<22掳C) place.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
NA NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Use protective eye wear. NA
Skin Use protective gloves. NA
Inhalation NA NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-608-00
Form WI04-11A Rev. 1
Product Name: Elan Plastic Primer Release Date: May 30, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Viscous liquid. Color: Light yellow Slight acrylic odor
Boiling Point 掳C / 掳F N/D
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F N/A
Solid (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
NA immiscible N/A
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/D N/D N/A
Other
Density g/cc: >1; Volatile organic compounds: Methyl methacrylate
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
NA
Hazardous Products Produced During Decomposition
NA
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur NA
Stability? Conditions to Avoid
Stable Unstable NA Avoid high temperatures (>40掳C) / 掳F
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Eye contact: The product irritates the eyes. Skin contact: May irritate the skin especially of persons with sensitive skin. Sensitization: May cause
allergic reaction on contact with the skin.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
N/A
13. Disposal Considerations
Regulations
Dispose of waste product in a sanitary landfill.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Elan Plastic Primer NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Use normal and customary shipping and transportation methods.
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-608-00
Form WI04-11A Rev. 1
Product Name: Elan Plastic Primer Release Date: May 30, 2007
15. Regulatory Information
Federal Regulations
Classification: Xi: Irritant. Content: Bisphenol diglycidylmethacrylate 15-40%, Methyl methacrylate 15-40%, Tetra hydrofurfuryl methacrylate 15-
40%.
Risk phrases: R11; Flammable. R36/38; Irritates the eyes and skin. R43; May cause allergic reaction on contact with skin.
Protection phrases: S37/39; Use protective gloves and protective wear. S; (2)7-9-16-33 Keep out of reach of children, keep container tightly closed
in well ventilated place, no smoking, keep away from flames, do not breath vapors, avoid static discharge.
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 15/52 Supplier Release: July 1 , 1998
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|