Part Number(s):
MATERIAL SAFETY DATA SHEET 51-100-01
Form WI04-11A Rev. 1
Product Name: Accu Bond Paste A /Fluoride Release Date: March 12, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Accu Bond paste A w/ Fl Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
2455-24-5 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components Classification C.A.S. Number Exposure Limits %
Ethoxylated bisphenol dimethacrylate Xi; R3 6 / 38-43 2455-24-5 NA 1-5
Triethyleneglycol dimethacrylate Xi; R3 6/ 38-43 109-16-0 NA 3-7
Bisphenol diglycidyl methacrylate Xi; R3 6/ 38-43 1565-94-2 NA 5-10
Sodium fluoride 7681-49-4 NA 0-1-1.0
Glass filler 65997-18-4 NA 60-99
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Irritate the eyes. NA NA NA NA
Eye
May cause allergic NA NA NA NA
Skin
reaction on skin.
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush with running water for at Seek medical attention. NA
Eye
least 15 minutes while keeping eye
lids open.
Wash with soap and water. NA NA
Skin
Does not require first aid NA NA
Inhalation
measures.
Drink two glasses of water or milk. Call a physician if a substantial NA
Ingestion
amount has been ingested.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-100-01
Form WI04-11A Rev. 1
Product Name: Accu Bond Paste A /Fluoride Release Date: March 12, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
>55掳C / 掳F LEL: N/D UEL: N/D NA
Self ignition: N/D
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Dry chemical powder, foam, or carbon dioxide. NA
Protection and Procedures for Firefighters
NA
Unusual Fire and Explosion Hazards
Upon combustion irritating gases may form.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Wipe with damp paper towels, discard properly.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
This product is used exclusively for dental purpose by trained personnel.
Storage Practices and Warnings
(掳C / 掳F). Store in ventilated, dry, cool (<22掳 C) place.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
NA NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Use protective eye wear. NA
Skin Use protective gloves. NA
Inhalation NA NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-100-01
Form WI04-11A Rev. 1
Product Name: Accu Bond Paste A /Fluoride Release Date: March 12, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Viscous paste. Color: tooth colored. Slight acrylic odor
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F N/A
Solid PASTE (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
NA Insoluble N/A
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N /D N/A N/A
Other
Density g/cc: >1 Volatile organic compound: None.
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
NA
Hazardous Products Produced During Decomposition
NA
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur NA
Stability? Conditions to Avoid
Stable Unstable NA Avoid high temperatures (>40掳C) / 掳F
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Eye contact: The product irritates the eyes. Skin contact: May irritate the skin especially of persons with sensitive skin. Sensitization: May cause
allergic reaction on contact with the skin.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
N/A
13. Disposal Considerations
Regulations
Dispose of waste product in a sanitary landfill.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Accu Bond Paste A w/ Fl NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Use normal and customary shipping and transportation methods.
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-100-01
Form WI04-11A Rev. 1
Product Name: Accu Bond Paste A /Fluoride Release Date: March 12, 2007
15. Regulatory Information
Federal Regulations
Classification: Xi : Irritant. Content: Eloxylated bisphenol dimethacrylate 1-5%, bisphenol diglycidylmethacrylate 5-10%, triethyleneglycol
dimethacrylate 3-7 %, sodium fluoride 0.1-1.0%, glass filler 60-99%.
Risk phrases: R36/38; Irritates the eyes and skin.
Protection phrases: S37/39; Use protective gloves and protective wear.
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 15/51 Supplier Release: July 1, 1998
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|