O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
1. Product and Company Identification
Rear View Mirror Adhesive
Product Name:
See Attachment
Product Code:
Adhesive - activator
Application:
Ford Motor Company
Supplier:
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Poison Control Center: 1-800-959-3673
Emergency Telephone:
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
ISOPROPANOL 67-63-0 60-100 ACGIH/OSHA
HAZCOM
PEL/TLV-US
SARA 313
WHMIS 1
STODDARD SOLVENT 8052-41-3 1-5 ACGIH/OSHA
HAZCOM
PEL/TLV-US
RSMS_D_ALL
WHMIS 1
3. Hazards Identification
FLAMMABLE
May cause irritation to the eyes, characterized by a burning sensation,
Health:
redness, and excessive watering.
This product may cause irritation to the respiratory system and skin.
Ingestion can cause gastrointestinal irritation, nausea, vomiting and
diarrhea.
This product is harmful by inhalation and if it is swallowed.
This product may be harmful if it is absorbed through the skin.
Prolonged or repeated contact with this product may dry and/or defat
the skin.
This product may cause central nervous system (CNS) depression.
Overexposure may cause central nervous system, kidney and liver
effects.
4. First-Aid Measures
If gas/fume/vapor/dust/mist from the material is inhaled, remove the
Inhalation:
affected person immediately to fresh air.
If irritation persists, get medical attention.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
For skin contact, wash immediately with soap and water.
Skin Contact:
If irritation persists, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water for
Eye Contact:
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.
If the material is swallowed, get immediate medical attention or advice
Ingestion:
-- Do not induce vomiting.
Headache, dizziness, nausea, and loss of coordination are indications
Most Important Symptoms Effects:
of excessive exposure to vapors or spray mists.
This material, if aspirated into the lungs, may cause chemical
Notes to a Physician:
pneumonitis; treat the affected person appropriately.
5. Fire-Fighting Measures
Dry chemical, foam, carbon dioxide.
Extinguishing Media:
Water may be an ineffective extinguishing medium.
Specific Methods:
Water may be used to cool exposed containers to prevent pressure
build-up and explosion when exposed to extreme heat.
DANGEROUS when exposed to heat or flame. This material can be
Specific Hazards:
ignited by flame or spark under all normal atmospheric conditions.
Empty containers may retain product residue including Flammable or
Explosive vapors. Do not cut, drill, grind, or weld near full, partially full,
or empty product containers.
Upon decomposition, this product emits carbon monoxide, carbon
dioxide and/or low molecular weight hydrocarbons.
Irritating and toxic gases or fumes may be released during a fire.
Vapors are heavier than air and may travel along the ground to some
distant source of ignition and flash back.
Fire fighters should be equipped with NIOSH-approved, self-contained
Protection of Firefighters:
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Avoid inhalation of vapors and contact with skin and eyes.
Personal Precautions:
Eliminate all sources of ignition or flammables that may come into
contact with a spill of this material.
Provide adequate ventilation.
Wear appropriate protective equipment and clothing during clean-up.
Do not allow this material to drain into sewers/water supplies.
Environmental Precautions:
Absorb the spilled material with an inert absorbent (nonflammable)
Methods for Cleaning Up:
material.
Thoroughly wash the area after a spill or leak clean-up.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
7. Handling and Storage
Handling:
Keep this product from heat, sparks, or open flame.
Technical Measures:
Precautions and Advice for Safe Avoid skin and eye contact.
Do not breathe gas/fumes/vapor/spray.
Handling:
Keep the container closed when not in use.
Eliminate all sources of ignition.
Storage: Technical Measures:
Do not store this material in open or unlabeled containers.
Storage Conditions:
Store this product away from strong oxidizing agents.
Store this product in a cool, dry, well-ventilated place.
8. Exposure Controls/Personal Protection
Use general ventilation.
Engineering Measures:
Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.
Eyewash and emergency showers are recommended.
Exposure Limits:
Chemical Name TWA STEL/C References
200(ppm)
ISOPROPANOL ACGIH
400(ppm) 980(ppm) OSHA
100(ppm)
STODDARD ACGIH
SOLVENT
500(ppm) 2900(ppm) OSHA
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
The use of neoprene gloves is recommended.
Hand Protection:
The use of nitrile-latex gloves is recommended.
Wear safety glasses with side shields.
Eye Protection:
Remove contaminated clothing and wash before reuse.
Skin and Body Protection:
Wash thoroughly after handling.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
When using this material, do not eat, drink or smoke.
Hygiene Measures:
9. Physical and Chemical Properties
0.79
Specific Gravity:
LIQUID
Physical State:
ALCOHOL
Odor:
CLEAR
Color:
N/AP
pH:
Temperature Range During which Changes
in Physical State Occur:
82.2 掳C
Boiling Point:
12 掳C TCC
Flash Point:
400 掳C
Auto-ignition Temperature:
Explosion Properties:
12 %
UEL:
2%
LEL:
33@20掳C mmHg
Vapor Pressure:
2.1 2-Propanol
Vapor Density:
VERY SOLUBLE
Solubility:
2.8@40掳C cSt Brookfield
Viscosity:
7.7 (BuAc = 1)
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
Instability caused by heat, flame and sparks.
This product may react with strong oxidizing agents (bleach--sodium
Conditions and Materials to Avoid:
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).
Carbon monoxide, carbon dioxide, and other low molecular weight
Hazardous Decomposition Products:
hydrocarbons.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
11. Toxicological Information
67-63-0 ISOPROPANOL
Oral, adult rat, LD50 = 5045 mg/kg
67-63-0 ISOPROPANOL
Skin, adult rabbit, LD50 = 12800 mg/kg
Prolonged and/or repeated skin contact with this product may cause
Skin Contact:
irritation/dermatitis.
Reports have associated repeated and prolonged overexposure to
Chronic (Long Term) Toxicity:
solvents with permanent brain and nervous system damage.
There may be some small amount of aromatic hydrocarbons (benzene,
toluene, and xylene) in Stoddard solvent. Although the toxicity of
Stoddard solvent is not attributable to any one type of constituent, the
aromatic components are considered to be more toxic than the other
components of Stoddard solvent.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No consideration given when disposed of according to local, state, and
Contaminated Packaging:
Federal regulations.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
Isopropanol
Proper Shipping Name:
UN1219
UN Number:
3
Hazard Class / Division:
II
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
Isopropanol
Proper Shipping Name:
UN1219
UN Number:
3
Hazard Class / Division:
II
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
ISOPROPANOL
Proper Shipping Name:
UN1219
UN Number:
3
Hazard Class/Division:
II
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
International and Domestic Air Transportation - ICAO & IATA Section 4.2
ISOPROPANOL
Proper Shipping Name:
UN1219
UN Number:
3
Hazard Class/Division:
II
Packing Group:
FLAMMABLE LIQUID
Label:
International Water Transportation - IMDG Code Amendment 31-02
ISOPROPANOL
Proper Shipping Name:
UN1219
UN Number:
3
Hazard Class/Division:
12 掳C TCC
Flashpoint:
II
Packing Group:
3-06
Ems Number:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
15. Regulatory Information
This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
The components of this product are listed on the TSCA Inventory
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
Use only as directed.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
HMIS and NFPA Hazard Class Information:
Health: 1 (Slight) Flammability: 3 (Serious) Physical Hazard: 0 (Least)
HMIS Hazard Class:
Health: 1 (Slight) Flammability: 3 (Serious) Instability: 0 (Least)
NFPA Hazard Class:
The following sections contain revisions OR 2
15
NEW statements.
The chemical identification and properties for this material were provided
Preparation Information:
by the manufacturer. For Canadian locations, a manufacture's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Diagnostic Service Center II, 1800
Fairlane Drive, Allen Park, MI 48101, USA.
The information on this data sheet represents our current data and is
Disclaimer:
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
175811 Level: 1
FIR No.:
US-US-5 Release Date: 2008-08-20
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
TA-17 0.02 fl. oz. (0.6 mL)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 9 / 9 Official Record
Application: MATS
|