Part Number(s):
MATERIAL SAFETY DATA SHEET 25-705-00(25-701-20/25)
Form WI04-11A Rev. 1
Product Name: Essix 陆 MM Bltray Release Date: April 18, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Mobile polyethylene (LDPE) Refer to part number
Chemical Name Manufacture / Distributor
Polyethylene (low density) GAC International Inc.
C.A.S. Number Address
2002-82-4 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
Intrusion and molding resin 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Polyethylene 2002-82-4 NA 100.00
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Pellets and fines, if any, NA NA NA NA
Eye
may cause abrasive injury
and irritation to eyes.
NA NA NA NA NA
Skin
Inhalation of fines, if any, NA NA NA NA
Inhalation
can cause irritation or
nose and throat.
NA NA NA NA NA
Ingestion
Threshold limit value: NA NA NA NA
Other
10.00 mg/m3 suggested
for nuisance dusts.
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush with water. NA NA
Eye
If burned by contact with hot See a physician for removal of NA
Skin
material, cool molten material adhering material and treatment
adhering to skin as quickly as or burn.
possible with water. Wash contact
areas with soap and water.
Not expected to be a problem. NA NA
Inhalation
Not expected to be a problem If uncomfortable seek medical NA
Ingestion
when ingested. assistance.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-705-00(25-701-20/25)
Form WI04-11A Rev. 1
Product Name: Essix 陆 MM Bltray Release Date: April 18, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F NA(IP 170/70) LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- 1, Flammability-0, Reactivity-
NA
NA 0.
Extinguishing Media Extinguishing Media to Avoid
Carbon dioxide, foam, dry chemical and water fog. NA
Protection and Procedures for Firefighters
Use water to keep fire exposed containers cool. Water spray may be used to flush spills away from exposure. For fires in enclosed areas, firefighters
must use self-contained breathing apparatus. Prevent runoff from fire control or dilution from entering streams or drinking water supply.
Unusual Fire and Explosion Hazards
High dust levels may create potential for explosion. Exposure to fire can generate highly toxic fumes.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Shovel up and dispose as normal refuse.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
Environmental Impact: Report spills as required to appropriate authorities. U.S. coast guard regulations require immediate reporting of spills that
could reach waterway including intermittent dry creaks. Report spill to coast guard toll free number (800) 424-8802. In case of accident or road spill
notify CHEMTREC (800) 424-9300.
7. Handling and Storage
Handling Practices and Warnings
NA
Storage Practices and Warnings
(掳C / 掳F). Store in a cool area. Must be labeled as: see appendix for precautionary label: MINHAZ
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
NA NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Normal industrial eye protection practices should be employed. NA
Skin Gloves as required to handle hot materials. NA
Inhalation Approved dust respirators must be used for dusty conditions or if dust NA
levels exceed established standards. No special requirements under
ordinary conditions of use and with adequate ventilation.
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-705-00(25-701-20/25)
Form WI04-11A Rev. 1
Product Name: Essix 陆 MM Bltray Release Date: April 18, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Translucent pellets Mild
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 110 掳C / 230 掳F
Solid NA (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
Negligible NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A NA NA
Other
Viscosity: at 100F, SUS: NA
at 40C, CS: NA
at 210F, SUS: NA
at 100C, CS: NA.
Pour point F (C): N/A.
Relative density, 15/4C: 1.33
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Strong oxidizers.
Hazardous Products Produced During Decomposition
Carbon monoxide, aldehydes, acetic acid.
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F Extreme heat
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
** Acute Toxicology**
Oral toxicity (Rats): Nontoxic (estimated) ** Based on testing of similar products and / or the components.
Dermal toxicity (Rabbits): Nontoxic (estimated) ** Based on testing of similar products and / or the components.
Inhalation toxicity (Rats): Nontoxic (estimated) ** Based on testing of similar products and / or the components.
Eye irritation (Rabbits): Expected to be non-irritating. ** Based on testing of similar products and / or the components.
Skin irritation (Rabbits): Expected to be non-irritating. ** Based on testing of similar products and / or the components.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 25-705-00(25-701-20/25)
Form WI04-11A Rev. 1
Product Name: Essix 陆 MM Bltray Release Date: April 18, 2007
13. Disposal Considerations
Regulations
Waste management: Product is suitable for burning in an enclosed, controlled burner for fuel value or disposal by supervised incineration. Such
burning may be limited pursuant to the resource conservation and recovery act. Use of these methods is subject to user compliance with applicable
laws and regulations and consideration of product characteristics at time of disposal.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
N/A NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
N/A NA
Yes No NA
Other
Precautionary label text: Good personal hygiene and safe work practices should always be followed when handling this product. For industrial use.
Not intended for use in or around a household or dwelling. This product was assessed in accordance with OSHA standard 29 CFR 1910.1200 and
was determined not to be hazardous. Minhaz(4/86).
15. Regulatory Information
Federal Regulations
Governmental Inventory Status: All components registered in accordance with TSCA.
DOT: Shipping name: Not applicable.
Hazard class: Not applicable.
US OSHA Hazard communication standard: Product assessed in accordance with OSHA 29 CFR 191.1200 and determined not to be hazardous.
RCRA Information: The unused product, in our opinion, is not specifically listed by the EPA as a hazardous waste (40CFR, part 261D); does not
exhibit the hazardous characteristics of ignitability, corrosivity, or reactivity, and is not formulated with the contaminants listed in the toxicity
characteristic (TC) Rule as determined by the toxicity characteristic leaching procedure (TCLP). However, used product may be regulated.
U.S. Superfund amendments and reauthorization act (SARA) title III: This product contains no鈥? Extremely hazardous substances鈥?.
SARA (302) reportable hazard categories: None. This procedure contains no chemical reportable under SARA (313) toxic release program.
The following product ingredients are cited on the lists below:
Chemical name CAS number List citation
** No reportable ingredients.
** Key to list citations**
1=OSHA Z 2=ACGIH 3=IARC 4=NTP 5=NCI
6= EPA CARC 7= NFPA 49 8= NFPA 325 M
9= DOT HMT 10= CA RTK 11= IL RTK 12= MA RTK 13= MN RTK 14= NJ RTK 15= MI 293 16= FL RTK 17= PA RTK 18= CA P65
**NTP, IARC, and OSHA include carcinogenic listings**
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 25/25 Supplier Release: NA
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|