Part Number(s):
MATERIAL SAFETY DATA SHEET 60-0001 THRU 60-00011
Form WI04-11A Rev. 1
Product Name: For coatings, Resins and Related Release Date: March 14, 2007
Materials
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
50-1 Polypro Reg. color G6Y-5812
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
NA 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components % By wt. % By vol. LEL C.A.S. Number Exposure Limits %
Particulates not regulates 100.00 100.00 N/A NA NA NA
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA NA NA
Eye
NA NA NA NA NA
Skin
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
This product is not listed by OSHA, NTP, or IARC as a carcinogen.
Carcinogenicity (IARC, NTP)
This product is not listed by OSHA, NTP, or IARC as a carcinogen. Threshold limit value: N/E
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Immediately flush with water to NA NA
Eye
remove particles.
Wash with mild soap and water. NA NA
Skin
Remove personnel from source of Call physician NA
Inhalation
dust
NA Call physician NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 60-0001 THRU 60-00011
Form WI04-11A Rev. 1
Product Name: For coatings, Resins and Related Release Date: March 14, 2007
Materials
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F N/A Seta flash LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Water spray, carbon dioxide, dry chemical, fog. NA
Protection and Procedures for Firefighters
None
Unusual Fire and Explosion Hazards
Firefighters should be equipped with self contained breathing apparatus to protect against potentially toxic and irritating fumes.
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Contain spillage and scoop up or vacuum. Avoid dusting.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
Protect containers against physical damage, store in a dry area away from feed and food products. Keep containers sealed to avoid contamination.
Storage Practices and Warnings
(掳C / 掳F). Other precautions: Avoid making and breathing dust. Use with adequate ventilation. Wash thoroughly after handling, and before eating,
drinking and smoking.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Not required. NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Not required. NA
Eye/Face
Not required. NA
Skin
NA
Inhalation Not required.
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
Not required.
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 60-0001 THRU 60-00011
Form WI04-11A Rev. 1
Product Name: For coatings, Resins and Related Release Date: March 14, 2007
Materials
9. Physical and Chemical Characteristics
Appearance Odor
Red pellets Slight odor
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F NA
Solid NA (Other) Freezing Point 掳C / 掳F N/A
Specific Gravity or Density (H20=1) Solubility in Water pH
N/A N/A NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A N/A N/A
Other
% Volatile by volume: N/A
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
None known.
Hazardous Products Produced During Decomposition
None
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F None known.
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F None
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Ingredient Burns EPA TLV (TWA) PEL
Material description Skin list mg/m3 ppm mg/m3
Particulates not regulated No No 10000.00 10.00 10.00
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
Disposal must be made in accordance with federal, state and local regulations.
Properties (Physical/Chemical) Affecting Disposal
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 60-0001 THRU 60-00011
Form WI04-11A Rev. 1
Product Name: For coatings, Resins and Related Release Date: March 14, 2007
Materials
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
NA NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
NA
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 205/ T99 Supplier Release: April 12, 2004
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|