Part Number(s):
MATERIAL SAFETY DATA SHEET 97-300-01-9
Form WI04-11A Rev. 1
Product Name: GAC Ortho Acrylic Powder Release Date: March 13, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
GAC Ortho Acrylic Powder N/A
Chemical Name Manufacture / Distributor
Chemical name: Blend of copolymers & plastic. Formula: Proprietary. GAC International Inc.
Blend .Material: F.B. Polymer Pink.
C.A.S. Number Address
84-66-4 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components Approx. wt (%) TLV PEL C.A.S. Number Exposure Limits %
Particulates Noc. N/A 10 15 NE NA <99
Dialkil Phtalets N/A 5 5 94-66-4 NA .15
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA NA NA
Eye
NA NA NA NA NA
Skin
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
Not known to cause significant health problems. Avoid inhalation of dust and ingestion. Keep dust out of eyes to avoid irritation.
Carcinogenicity (IARC, NTP)
NA
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush with water for 15 minutes. NA NA
Eye
Wash with soap and water. NA NA
Skin
Remove to fresh air and get NA NA
Inhalation
medical help if discomfort persists.
Rinse with water. Call doctor if amount was large NA
Ingestion
or discomfort persists.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-300-01-9
Form WI04-11A Rev. 1
Product Name: GAC Ortho Acrylic Powder Release Date: March 13, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 304掳F LEL: N/A UEL: N/A N/E
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
NA
NA NA
Extinguishing Media Extinguishing Media to Avoid
Dry chemical, water spray. NA
Protection and Procedures for Firefighters
Avoid extinguishing methods which may generate dust clouds. Water stream can disperse dust into air producing a fire hazard and possible
explosion hazard of exposed to ignition source.
Unusual Fire and Explosion Hazards
N/A
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Sweep up to avoid slipping hazard. Keep airborne particulates at a minimum when cleaning up spills.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
NA
Storage Practices and Warnings
(掳C / 掳F). Store in a cool dry place. Keep container closed to avoid water absorption and contamination. Storage temperature: keep indoors.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Local exhaust at processing equipment. NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Safety glasses NA
Skin Protective gloves: Not mandatory NA
Inhalation Use types of particulates not otherwise classified if needed. NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
Breathing apparatus, gloves, safety glasses.
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-300-01-9
Form WI04-11A Rev. 1
Product Name: GAC Ortho Acrylic Powder Release Date: March 13, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Fine white powder Faint odor in bulk.
Boiling Point 掳C / 掳F N/E
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F N/A
Solid (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
N/E Insoluble NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A N/A N/A
Other
Viscosity: N/A % Volatile (By Weight): < 2
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
NA
Hazardous Products Produced During Decomposition
N/A
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F strong oxidizing products.
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable Heating above 300掳C / 掳F
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Avoid inhalation of dust. Keep dust out of eyes to prevent possible irritation.
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
Dispose of in a landfill or incinerate according to federal, state and local regulations.
Properties (Physical/Chemical) Affecting Disposal
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 97-300-01-9
Form WI04-11A Rev. 1
Product Name: GAC Ortho Acrylic Powder Release Date: March 13, 2007
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
GAC Ortho Acrylic Powder NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Avoid formation of dust when using products.
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 39/97 Supplier Release: December 1, 1996
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|