MATERIAL SAFETY DATA SHEET
CL104 - VS7 Cooling System Conditioner
Part #CL104
Gold Eagle Company
4400 S. Kildare Blvd.
Chicago, IL 60632-4372
(773) 376-4400
SECTION I PRODUCT IDENTITY
Product / Trade Name (s): CL104 - VS7 Cooling System Conditioner
Part Number: CL104
MSDS Date: 05/14/03
CAS #: N/A
Category: N/A
Distributor: N/A
Chemical Name: Amine borate
Formula: N/A
Brief Description: Organic rust inhibitor for automotive coolant systems.
SECTION II HAZARDOUS INGREDIENTS & EXPOSURE LIMITS
CHEMICAL NAME CAS # % LIMIT VALUES
BORAMIDES 67952-33-4 5.00 N/A
SECTION III PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 212 F. (100 C.)
Vapor Pressure (mm Hg.): N/A
Vapor Density (AIR = 1): <1.0
Solubility in Water: Soluble
% Volatile / Volume: N/A
Appearance and Odor: Clear, water white liquid
pH: 8 to 10
Specific Gravity (H2O = 1): 1.5
Miscellaneous Information:
None
Page -1-
CL104 - VS7 Cooling System Conditioner
Part #CL104
SECTION IV FIRE AND EXPLOSION HAZARD DATA
Flash Point: N/A
Flammable Limits: N/A
Lower Explosive Limit (LEL): N/A
Upper Explosive Limit (UEL): N/A
Extinguisher Media
Carbon dioxide, dry chemical, foam and water fog.
Special Fire Fighting Procedures
Use SCBA apparatus operated in pressure demand or other positive pressure mode.
Unusual Fire and Explosion Hazards
Combustion can produce toxic oxide of nitrogen.
SECTION V REACTIVITY DATA
Stable: Yes
Hazardous Polymerization May Occur: No
Conditions to Avoid
Copper and strongly alkaline materials and products.
Incompatibility (Material to Avoid)
N/A
Hazardous Decomposition or Byproducts
Oxides of nitrogen.
SECTION VI HEALTH HAZARD DATA
Effects on Eyes
Severe irritant
Effects on Skin
Irritant
Effects Due to Ingestion
Treat patient for borate ingestion, pH of product is alkaline 8.0 to 10.0.
Effects Due to Inhalation
Respiratory irritation and coughing.
First Aid Procedures for Eyes
If the product contacts the eyes, immediately wash the eyes with large quantities of room temperature
water for at least 15 minutes, occasionally lifting the lower and upper lids. Get medical attention
immediately. A follow up visit to an opthalmologist should be made. Contact lenses should not be worn
when working with this chemical.
First Aid Procedures for Skin
If the product contacts the skin, promptly wash the contaminated skin with soap and water for at least 15
minutes. Get medical attention as required.
First Aid Procedures for Ingestion
If this product is ingested and the person is conscious, induce vomiting. DO NOT INDUCE AN
UNCONSCIOUS PERSON TO VOMIT. Get medical attention immediately.
First Aid Procedures for Inhalation
Move the exposed person to fresh air at once and call emergency medical care. If breathing has stopped,
give artificial respiration. If breathing is difficult, give humidified oxygen.
Page -2-
CL104 - VS7 Cooling System Conditioner
Part #CL104
SECTION VII PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released or Spilled
SMALL SPILLS: Remove sources of heat or ignition, provide adequate ventilation, contain leak using
absorbent, inert, non-combustible material.
LARGE SPILLS: Contain spill, transfer to secure containers. In the event of an uncontrolled material
release, the user should determine if release is reportable under applicable laws and regulations.
Waste Disposal Method
Dispose of product in accordance with local, state, and federal regulations. Before attempting clean up,
refer to other sections of MSDS for hazard warning information.
Precautions to Be Taken in Handling and Storing
See other sections of MSDS.
Other Precautions
None
SECTION VIII CONTROL MEASURES
Local Exhaust: Provide local ventilation to maintain exposure levels below any recommended
limits.
Mechanical (General): In confined spaces, mechanical ventilation may be required.
Special Ventilation: N/A
Other Ventilation: N/A
Protective Gloves: Use natural rubber or neoprene gloves as required.
Eye Protection: Use splash proof chemical, safety goggles or appropriate full-face shield.
Other Protective Clothing or Equipment
If there is a possibility of exposure of an individual鈥檚 body to the product, wear body covering clothes to
avoid prolonged or repeated exposure.
Work/Hygienic Practices
Use normal hygiene practices.
Respiratory Protection (Specify Type)
Normally not required.
SECTION IX ADDITIONAL INFORMATION
Additional Information
SHIPPING INFORMATION (CFR 49 AND IMDG):
PROPER SHIPPING NAME : Cleaning Compound, N.O.I.
DOT HAZARD CLASS : None required.
DOT UN NUMBER : None required.
IMDG SHIPPING NAME : Non Hazardous Consumer Product
SARA TITLE III:
Section 302: None
Section 304: None
Section 311: None
Section 313: None
CERCLA:
Section 311 (b) (4): Requires discharges of crude oil and petroleum products in any kind of form to waters
must be reported to the National Response Center at (800) 424-8802.
Page -3-
CL104 - VS7 Cooling System Conditioner
Part #CL104
SECTION IX ADDITIONAL INFORMATION (cont.)
DISCLAIMER: Information presented herein is believed to be factual, as it has been derived from the
works and opinions of persons believed to be qualified experts. However, nothing contained in this
information is to be taken as warranty or representation for which the Gold Eagle Co. bears legal
responsibility. The user should review any recommendations in the specific context of the intended use to
determine whether they are appropriate.
Prepared by: Mike Profetto
Date: 05/14/03
While the information and recommendations set forth herein are believed to be accurate as of the MSDS date, Corbus, a
division of Compliance Management Systems, Inc., makes no warranties expressed or implied of fitness for a particular
purpose with respect hereto and disclaims all liability from reliance thereon.
Page -4-
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP