Date Prepared: August 11,2004
Page 1 of 4
1. Chemical Product and Company Identification
Product name: Procleix TIGRIS WNV Controls Kit
Product description: Negative Control
MSDS number: 301184.481
MANUFACTURER: EMERGENCY TELEPHONE NUMBERS:
Gen-Probe Incorporated (800) 424-9300 (CHEMTREC National)
10210 Genetic Center Drive (703) 527-3887 (CHEMTREC International)
San Diego, CA 92121-4362 (858) 410-8000 (Gen-Probe Corporate Office)
For technical issues regarding reagents or instrumentation which do not pertain to a
hazardous spill, contact Gen-Probe Technical Service at (800) 523-5001 Monday through
Friday, 6:00 a.m. to 5:00 p.m. Pacific Time.
2. Composition/Information on Hazardous Ingredients
Percent
(weight/weight)
Component Synonym CAS number
N-[2-Hydroxyethyl] piperazine HEPES, Free Acid 18% 7365-45-9
Lithium Lauryl Sulfate Dodecyl Lithium Sulfate 10% 2044-56-6
Succinic acid Butanedioic acid 3% 110-16-6
Lithium Hydroxide, Not available 3% 1310-66-3
Monhydrate
3. Hazards Identification
This material may be irritating to the skin, mucous membranes or eyes. Contact should be
avoided. Do not inhale or take internally.
Date Prepared: August 11,2004
Page 2 of 4
MSDS No: 301184.481
4. First Aid Measures
Skin contact: Wash with soap and water. Get medical attention if irritation develops or persists.
Eye contact: Immediately flush eyes with plenty of water. Get medical attention, if irritation
persists.
Inhalation: No specific treatment is necessary since this material is not likely to be hazardous
by inhalation. If exposed to excessive levels of vapors, remove to fresh air and
get medical attention if symptoms develop.
Ingestion: This substance may be harmful if swallowed. If swallowed, rinse mouth out with
water. Seek medical attention if adverse health symptoms develop.
5. Fire Fighting Measures
Flashpoint: Not applicable
Upper and Lower flammable limit: Not applicable
Flammability classification: Not applicable
General fire hazard information: Not applicable
Extinguishing instructions/media: Not applicable
6. Accidental Release Measures
Containment, treatment, and clean-up procedures:
Wear suitable laboratory protective clothing. Absorb spill with inert material then place in a
disposal container.
7. Handling and Storage
Observe good laboratory handling practices. Always wash hands thoroughly after removing
protective gloves.
Date Prepared: August 11,2004
Page 3 of 4
MSDS No: 301184.481
8. Exposure Controls/Personal Protection
Ventilation: General room ventilation is satisfactory.
Protective gloves: Impervious chemical-resistant gloves.
Eye protection: Safety glasses and faceshield or goggles.
Other equipment Safety shower, eye wash, and other applicable equipment.
:
9. Physical and Chemical Properties
Physical state, appearance and Odor: Physical state: frozen; Colorless
Vapor pressure and density, specific
density, solubility, pH, etc: Not determined as a whole.
Other characteristics: Not determined as a whole.
10. Stability and Reactivity
Conditions to avoid: Stable under normal temperature and pressures.
Incompatibilities: Strong oxidizing agents and acids.
Hazardous
decomposition products
Hazardous polymerization will not occur.
and polymerization:
11. Toxicological Information
HEPES: May be harmful by inhalation, ingestion, or skin absorption.
Lithium lauryl sulfate: No Data Available.
Succinic acid: orl-rat LD50: 2260 mg/kg.
Refer to the Registry of Toxic Effects of Chemical Substances (RTECS) for definition of
abbreviations used in the above text and for additional information.
Date Prepared: August 11,2004
Page 4 of 4
MSDS No: 301184.481
12. Ecological Information
Ecotoxicity and environmental fate: Data not yet available.
13. Disposal Considerations
Dispose of by means as to comply with federal, state, and local regulations.
14. Transport Information
Proper shipping name and identification number: Not applicable
Hazard class: Not applicable
15. Regulatory Information
The information provided herein represents the most reasonable current information
available when this determination was made and is believed to be accurate and
dependable. Nevertheless, Gen-Probe Incorporated makes no representation as to the
accuracy or sufficiency of this information.
This product, or all the components thereof, is not for internal or external use in humans or
animals. Use only as directed on the enclosed package insert. Gen-Probe Incorporated will
assume no liability for the improper use of this product by misfeasance or malfeasance, nor
will Gen-Probe Incorporated assume liability from any nonfeasance as a result of the use of
this product. Good laboratory practices should be observed at all times, including, but not
limited to, "universal precautions" and "work practice controls." Skin, mucous membranes, or
eyes that come in contact with this product should be washed with plenty of water. If
irritation results or persists, get medical attention.
16. Other Information
None.
Date Prepared: August 11,2004
Page 1 of 4
1. Chemical Product and Company Identification
Product name: Procleix TIGRIS WNV Controls Kit
Product description: Positive Control
MSDS number: 301184.482
MANUFACTURER: EMERGENCY TELEPHONE NUMBERS:
Gen-Probe Incorporated (800) 424-9300 (CHEMTREC National)
10210 Genetic Center Drive (703) 527-3887 (CHEMTREC International)
San Diego, CA 92121-4362 (858) 410-8000 (Gen-Probe Corporate Office)
For technical issues regarding reagents or instrumentation which do not pertain to a
hazardous spill, contact Gen-Probe Technical Service at (800) 523-5001 Monday through
Friday, 6:00 a.m. to 5:00 p.m. Pacific Time.
2. Composition/Information on Hazardous Ingredients
Percent
(weight/weight)
Component Synonym CAS number
N-[2-Hydroxyethyl] piperazine HEPES, Free Acid 18% 7365-45-9
Lithium Lauryl Sulfate Dodecyl Lithium Sulfate 10% 2044-56-6
Succinic acid Butanedioic acid 3% 110-15-6
Lithium Hydroxide, Not available 3% 1310-66-3
Monohydrate
3. Hazards Identification
This material may be irritating to the skin, mucous membranes or eyes. Contact should be
avoided. Do not inhale or take internally.
Date Prepared: August 11,2004
Page 2 of 4
MSDS No: 301184.482
4. First Aid Measures
Skin contact: Wash with soap and water. Get medical attention if irritation develops or persists.
Eye contact: Immediately flush eyes with plenty of water. Get medical attention, if irritation
persists.
Inhalation: No specific treatment is necessary since this material is not likely to be hazardous
by inhalation. If exposed to excessive levels of vapors, remove to fresh air and
get medical attention if symptoms develop.
Ingestion: This substance may be harmful if swallowed. If swallowed, rinse mouth out with
water. Seek medical attention if adverse health symptoms develop.
5. Fire Fighting Measures
Flashpoint: Not applicable
Upper and Lower flammable limit: Not applicable
Flammability classification: Not applicable
General fire hazard information: Not applicable
Extinguishing instructions/media: Not applicable
6. Accidental Release Measures
Containment, treatment, and clean-up procedures:
Wear suitable laboratory protective clothing. Absorb spill with inert material then place in a
disposal container.
7. Handling and Storage
Observe good laboratory handling practices. Always wash hands thoroughly after removing
protective gloves.
Date Prepared: August 11,2004
Page 3 of 4
MSDS No: 301184.482
8. Exposure Controls/Personal Protection
Ventilation: General room ventilation is satisfactory.
Protective gloves: Impervious chemical-resistant gloves.
Eye protection: Safety glasses and faceshield or goggles.
Other equipment Safety shower, eye wash, and other applicable equipment.
:
9. Physical and Chemical Properties
Physical state, appearance and Odor: Physical state: frozen; Colorless
Vapor pressure and density, specific
density, solubility, pH, etc: Not determined as a whole.
Other characteristics: Not determined as a whole.
10. Stability and Reactivity
Conditions to avoid: Stable under normal temperature and pressures.
Incompatibilities: Strong oxidizing agents and acids.
Hazardous
decomposition products
Hazardous polymerization will not occur.
and polymerization:
11. Toxicological Information
HEPES: May be harmful by inhalation, ingestion, or skin absorption.
Refer to the Registry of Toxic Effects of Chemical Substances (RTECS) for definitions of
abbreviations used in the above test and for additional information.
Date Prepared: August 11,2004
Page 4 of 4
MSDS No: 301184.482
12. Ecological Information
Ecotoxicity and environmental fate: Data not yet available.
13. Disposal Considerations
Dispose of by means as to comply with federal, state, and local regulations.
14. Transport Information
Proper shipping name and identification number: Not applicable
Hazard class: Not applicable
15. Regulatory Information
The information provided herein represents the most reasonable current information
available when this determination was made and is believed to be accurate and
dependable. Nevertheless, Gen-Probe Incorporated makes no representation as to the
accuracy or sufficiency of this information.
This product, or all the components thereof, is not for internal or external use in humans or
animals. Use only as directed on the enclosed package insert. Gen-Probe Incorporated will
assume no liability for the improper use of this product by misfeasance or malfeasance, nor
will Gen-Probe Incorporated assume liability from any nonfeasance as a result of the use of
this product. Good laboratory practices should be observed at all times, including, but not
limited to, "universal precautions" and "work practice controls." Skin, mucous membranes, or
eyes that come in contact with this product should be washed with plenty of water. If
irritation results or persists, get medical attention.
16. Other Information
None.
|